In vitro and in vivo characterization of an impervious polyester arterial prosthesis: the Gelseal Triaxial graft.

Over the years, textile polyester arterial prostheses have acquired an excellent reputation for easy handling and good healing characteristics. Until recently, the main drawback in using them was the need for preclotting. This, however, is no longer true. Nonporous polyester grafts which have been coated with an impervious bioerodible layer during manufacture are now commercially available. The Gelseal Triaxial prosthesis is one of this new generation of grafts. It is manufactured by impregnating a Triaxial prosthesis with a gelatin coating. An in vivo and in vitro evaluation of this new device has found that its water permeability is almost zero. It has good handling and conformability characteristics, and its bursting strength is slightly greater than that of the uncoated prosthesis due, no doubt, to the presence of the gel. The rates of degradation of the gelatin coating have proven to be rapid under both in vitro and in vivo conditions. In fact, only a few traces of the gel were found remaining on the graft after 2 wk in the canine thoracic aorta. In addition, this study has demonstrated that the use of a bioerodible gelatin coating, with its ability to promote cellular regeneration, is a feasible approach with which to achieve earlier and more complete biological healing.