Efficient recovery of Cu and Ni from WPCB via alkali leaching approach.

The large generation of electronic waste (e-waste) is posing a serious threat to society. It is important to develop sustainable technology for the effective management of e-waste and the recovery of valuable metals from it. The present study employed hydrometallurgical approach for Cu and Ni extraction from waste printed circuit boards (WPCB) of mobile phones. This study demonstrates the application of ammonia-ammonium sulfate leaching for the maximum recovery of Cu and Ni. Investigations revealed that the most favourable reaction parameters for efficient metal extraction are - ammonia concentration - 90 g/L, ammonium sulfate concentration - 180 g/L, H2O2 concentration - 0.4 M, time - 4 h, liquid to solid ratio - 20 mL/g, temperature - 80 °C and agitation speed - 700 rpm. Under these conditions, 100% Cu and 90% Ni were extracted. Furthermore, the kinetic study was performed using the shrinking core model which revealed that the internal diffusion is the rate-controlling step for Cu and Ni extraction. The activation energies for Cu and Ni extraction were found out to be 4.5 and 5.7 kJ/mol, respectively. Finally, Cu was recovered with 98.38% purity using electrowinning at a constant DC voltage of 2.0 V at Al cathode. The present study provides a solution for concurrent extraction of Cu and Ni from the raw WPCB of mobile phones and selective recovery of Cu from metal leached solution. The process has the potential to recover the resources from WPCB while minimising the pollution caused by mismanagement of WPCB.