| Literature DB >> 34153156 |
Utsav Thapa1, Priyamvada Sharma1, David Hanigan1.
Abstract
Prior measurements at bench scale revealed that waterless urinal cartridges containing oily sealant fluids are capable of partitioning pharmaceuticals from urine and therefore reducing their concentration in wastewater. We sought to measure pharmaceutical removal from in-use waterless urinals. We developed a method to quantify pharmaceuticals in the sealant phase, which resulted in 79 ± 30% and 71 ± 30% recovery of eight pharmaceuticals from two sealant fluids, respectively. The method was applied to sealant samples collected over three weeks from in-use waterless urinals on a university campus. Six of eight pharmaceuticals were present in the sealant samples from 1.4 µg/L to 241 µg/L. Loads of the six pharmaceuticals detected in the sealants were removed from the receiving wastewater from 0.02 µg/day to 3.4 µg/day across the sampling period. The concentration of the pharmaceuticals were similar over time, indicating rapid saturation and washout of the sealant. We also observed relatively rapid loss of sealant at maintenance intervals consistent with the manufacturer's instructions. These findings indicate that while waterless urinals do remove some pharmaceuticals from the wastewater stream, meaningful changes to wastewater concentrations will only result if the sealant fluid and/or the urinal cartridge are significantly modified. PRACTITIONER POINTS: We developed a quantification method for pharmaceuticals in oily waterless urinal sealants. Pharmaceuticals were present at relatively low concentrations in the sealant phase of two in-use waterless urinals. We identify engineering challenges that must be overcome to meaningfully reduce pharmaceutical loads in wastewater with waterless urinals.Entities:
Keywords: PPCPs; TrOCs; emerging contaminants; partitioning; source separation; urine diversion; wastewater
Mesh:
Substances:
Year: 2021 PMID: 34153156 PMCID: PMC8863497 DOI: 10.1002/wer.1600
Source DB: PubMed Journal: Water Environ Res ISSN: 1061-4303 Impact factor: 1.946