Enzyme-free detection of hydrogen peroxide with a hybrid transducing system based on sodium carboxymethyl cellulose, poly(3,4-ethylenedioxythiophene) and prussian blue nanoparticles.

Herein, we report a two-layered hybrid catalytic interface composed of carboxymethyl cellulose (CMC), poly (3,4-ethylene dioxythiophene) (PEDOT), Prussian blue (PB) nanoparticles and Nickel-Hexacyanoferrate (Ni-HCF) layer for the enzyme-free detection of hydrogen peroxide (H2O2). Whereas the first layer, CMC:PEDOT:PB, is responsible for generating amperometric signals toward H2O2, Ni-HCF on CMC:PEDOT:PB layer is playing an active role as an operational stability-enhancer. In the study, where the systematic optimization of the sensor electrode is presented using cyclic voltammetry (CV), amperometry and electrochemical impedance spectroscopy (EIS) technique, the physical and chemical properties of the hybrid composite systems constructed is also supported by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) techniques. The amperometric signal generation of the H2O2 sensor was linear between 1 and 100 μM (R2 = 0.999) with a sensitivity of 416.11 μA mM-1cm-2, providing a limit of detection (LOD) of 0.33 μM. The sensing system, which was not affected by the various interfering molecules, creates a successful sensor platform for H2O2 measurements in tap water with a high recovery value between 94.0% and 110.5% and relatively small RSD in the range of 0.4-5.2%.