Ultrafast and efficient removal of Pb(II) from acidic aqueous solution using a novel polyvinyl alcohol superabsorbent.

The direct removal of heavy metal ions from acidic wastewater is a hard problem. In this study, a novel superabsorbent, polyvinyl alcohol phosphate ester (PVAP), was designed and prepared to remove Pb(II) from acidic wastewater (pH = 3). The PVAP can absorb water and swell to reach equilibrium within 30 s, which provides the conditions for ultrafast kinetic adsorption. For 100 mg/L Pb(II) solution, the adsorption reaches equilibrium within 5 min, and the removal ratio is more than 99.9% over a wide pH range of 3-6. Adsorption kinetics and isotherm data are consistent with pseudo-second-order and Langmuir model, respectively. The calculated maximum adsorption capacity for Pb(II) is 558.66 mg/g. Thermodynamic results show that the adsorption is spontaneous and exothermic process. The removal ratio for Pb(II) of PVAP still maintains above 99% after ten recycles. The PVAP can also simultaneously remove more than 97% of other heavy metal ions (Cu(II), Cd(II), Zn(II), Co(II), and Ni(II)) from an acidic solution. Moreover, the PVAP can efficiently purify simulated acid mine heavy metal wastewater, and the results meet EPA drinking water standards. The studies of X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy prove that the adsorption mechanism involves surface complexation. This new superabsorbent is a promising candidate for acidic heavy metal sewage disposal.