| Literature DB >> 34091298 |
X Cuong Nguyen1, T Thanh Huyen Nguyen1, T Hong Chuong Nguyen1, Quyet Van Le1, T Yen Binh Vo2, T Cuc Phuong Tran2, D Duong La3, Gopalakrishnan Kumar4, V Khanh Nguyen5, S Woong Chang6, W Jin Chung6, D Duc Nguyen7.
Abstract
This study investigated methyl orange (MO) dye adsorption using three biochars produced from agro-waste and invasive plants; the latter consisted of wattle bark (BA), mimosa (BM), and coffee husks (BC). BC had the lowest specific surface area (2.62 m2/g) compared to BA (393.15 m2/g) and BM (285.53 m2/g). The adsorption efficiency of MO was stable at pH 2-7 (95%-96%), whilst it had reduced stability at pH 7-12. Between 0 and 30 min, MO adsorption efficiency was >82%, and at 120 min, representative adsorption equilibrium had occurred. The maximum adsorption capacity of the biochars was 12.3 mg/g. The underlying adsorption mechanisms of the three biochars were governed by electrostatic adsorption and pore diffusion. There was an abundance of active sites for adsorption in BA and BM, while chemical adsorption appeared to be more vital for BC, as it contained more functional groups on its surface. The highest MO adsorption efficiency occurred with BM. BC was not recommended for MO removal, as it was observed to stain the water when a dose exceeding 5.0 g/L was utilized.Entities:
Keywords: Agro-waste; Biochar; Dye treatment; Invasive plant; Methyl orange
Year: 2021 PMID: 34091298 DOI: 10.1016/j.chemosphere.2021.131009
Source DB: PubMed Journal: Chemosphere ISSN: 0045-6535 Impact factor: 7.086