Literature DB >> 34058894

Microencapsulation of Lactobacillus rhamnosus ATCC 7469 by spray drying using maltodextrin, whey protein concentrate and trehalose.

Jacqueline Agudelo-Chaparro1, Héctor J Ciro-Velásquez1, José U Sepúlveda-Valencia1, Ezequiel José Pérez-Monterroza1.   

Abstract

This study aimed to microencapsulate Lactobacillus rhamnosus (L. rhamnosus) ATCC 7469 with whey protein concentrate (WPC), maltodextrin and trehalose by spray drying and to assess the impact of microencapsulation on cell viability and the properties of the dried powders. Spray-drying conditions, including inlet air temperature, air flow rate and feed pump, were fixed as independent variables, while probiotic survival, moisture content, water activity and effective yield were established as dependent variables. The survival of encapsulated L. rhamnosus by spray drying was optimized with response surface methodology, and the stability of the powder was assessed. The optimum spray-drying conditions were an inlet air temperature, air flow rate and feed pump rate of 169 °C, 33 m3/h and 16 mL/h, respectively, survival of 70%, air aspiration of 84% and outlet air temperature of 52 °C, achieving an overall desirability of 0.96. The physicochemical and structural characteristics of the produced powder were acceptable for application with regard to residual water content, hygroscopicity, water activity, and particle size. The results indicated that a protein-trehalose-maltodextrin mixture is a good wall material to encapsulate L. rhamnosus, showing important thermal protection during the drying process and increasing survival. However, a decrease in this capacity is observed at an air outlet temperature of approximately 101 °C. The possible effects of the wall materials and the drying conditions on survival are also discussed.

Entities:  

Keywords:  Probiotics; bioactive compounds; bioavailability; encapsulation; milk and dairy products

Mesh:

Substances:

Year:  2021        PMID: 34058894     DOI: 10.1177/10820132211020621

Source DB:  PubMed          Journal:  Food Sci Technol Int        ISSN: 1082-0132            Impact factor:   2.638


  3 in total

1.  Influence of nitrogen sources on the tolerance of Lacticaseibacillus rhamnosus to heat stress and oxidative stress.

Authors:  Chenchen Zhang; Yuemei Han; Ya Gui; Yunchao Wa; Dawei Chen; Yujun Huang; Boxing Yin; Ruixia Gu
Journal:  J Ind Microbiol Biotechnol       Date:  2022-10-13       Impact factor: 4.258

Review 2.  Materials Used for the Microencapsulation of Probiotic Bacteria in the Food Industry.

Authors:  Ewa Kowalska; Małgorzata Ziarno; Adam Ekielski; Tomasz Żelaziński
Journal:  Molecules       Date:  2022-05-21       Impact factor: 4.927

Review 3.  Emerging Technologies and Coating Materials for Improved Probiotication in Food Products: a Review.

Authors:  Sourav Misra; Pooja Pandey; Chandrakant Genu Dalbhagat; Hari Niwas Mishra
Journal:  Food Bioproc Tech       Date:  2022-01-30       Impact factor: 5.581

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.