Laser fabricated carbon quantum dots in anti-solvent for highly efficient carbon-based perovskite solar cells.

Additive passivation can be an effective strategy to regulate and control the properties of organic-inorganic halide perovskite film. In this article, carbon quantum dots (CQDs), fabricated by non-focused laser irradiation of carbon nanomaterial diluted in anti-solvent ethyl acetate, denoted as EACQDs, were adopted for perovskite film defect passivation and modification of carbon-based CH3NH3PbI3 perovskite solar cells (PSCs). The size of EACQDs can be tuned by manipulating the laser fluence. The morphology of perovskite film was uncovered through scanning electron microscopy and atomic force microscopy. After embedding of EACQDs, the defect in perovskite crystal was reduced, resulting in the decreased carrier recombination and accelerated carrier transportation, which were demonstrated by electrochemical impedance spectroscopy, photoluminescence and time-resolved photoluminescence. As a consequence, with the optimization of 0.01 mg/mL EACQDs (1064 nm-300 mJ·pulse-1·cm-2-10 min), the power conversion efficiency (PCE) of carbon-based PSCs achieved a maximum value of 16.43%, which improved 23.81% when compared with the pristine PSCs of 13.27%. Furthermore, the EACQDs optimized PSCs also exhibited an excellent stability and still retained 86% of its initial PCE after 50-day storage at the room atmosphere with a humidity of 30-50%.