A Safe Flexible Self-Powered Wristband System by Integrating Defective MnO2-x Nanosheet-Based Zinc-Ion Batteries with Perovskite Solar Cells.

The booming market of portable and wearable electronics has aroused the requests for advanced flexible self-powered energy systems featuring both excellent performance and high safety. Herein, we report a safe, flexible, self-powered wristband system by integrating high-performance zinc-ion batteries (ZIBs) with perovskite solar cells (PSCs). ZIBs were first fabricated on the basis of a defective MnO2-x nanosheet-grown carbon cloth (MnO2-x@CC), which was obtained via the simple lithium treatment of the MnO2 nanosheets to slightly expand the interlayer spacing and generate rich oxygen vacancies. When used as a ZIB cathode, the MnO2-x@CC with a ultrahigh mass loading (up to 25.5 mg cm-2) exhibits a much enhanced specific capacity (3.63 mAh cm-2 at current density of 3.93 mA cm-2), rate performance, and long cycle stability (no obvious degradation after 5000 cycles) than those of the MnO2@CC. Importantly, the MnO2-x@CC-based quasi-solid-state ZIB not only achieves excellent flexibility and an ultrahigh energy density of 5.11 mWh cm-2 (59.42 mWh cm-3) but also presents a high safety under a wide temperature range and various severe conditions. More importantly, the flexible ZIBs can be integrated with flexible PSCs to construct a safe, self-powered wristband, which is able to harvest light energy and power a commercial smart bracelet. This work sheds light on the development of high-performance ZIB cathodes and thus offers a good strategy to construct wearable self-powered energy systems for wearable electronics.