| Literature DB >> 34032407 |
Fan Wu1, He Tian1, Zhaoyi Yan1, Jie Ren1, Thomas Hirtz1, Guangyang Gou1, Yang Shen1, Yi Yang1, Tian-Ling Ren1.
Abstract
Two-dimensional (2D) heterostructures show great potential in achieving negative differential resistance (NDR) effects by Esaki diodes and or resonant tunneling diodes. However, most of the reported Esaki diode-based NDR devices realized by bulk 2D films lack sufficient gate tunability, and the tuning of NDR behavior from appearing to vanishing remains elusive. Here, a gate-tunable NDR device is reported based on a vertically stacked black phosphorus (BP) and molybdenum disulfide (MoS2) thin 2D heterojunction. At room temperature, a rectifying ratio of ∼6 orders of magnitude from a reverse rectifying diode to a forward rectifying diode by gate modulation is obtained. Through analyzing the temperature-dependent electrical properties, the tunneling mechanism at a certain gate voltage range is revealed. Moreover, the switchable and continuously gate-tunable NDR behavior is realized with a maximum peak-to-valley ratio of 1.23 at 77 K, as shown in the IDS mappings by sweeping VDS under different VGS. In addition, a compact model for gate-tunable NDR behavior in 2D heterostructures is proposed. To our best knowledge, this is the first demonstration of NDR behavior in BP-MoS2 heterostructures. Consequently, this work sheds light on the gate-tunable NDR devices and reconfigurable logic devices for realizing ternary and reconfigurable logic systems.Entities:
Keywords: 2D heterojunction; Esaki diodes; black phosphorus; molybdenum disulfide; negative differential resistance
Year: 2021 PMID: 34032407 DOI: 10.1021/acsami.1c03959
Source DB: PubMed Journal: ACS Appl Mater Interfaces ISSN: 1944-8244 Impact factor: 9.229