Masato Tanaka1, Mahendra Singh2, Yoshihiro Fujiwara2, Koji Uotani2, Shinya Arataki2, Taro Yamauchi2, Kazuo Nakanishi3. 1. Department of Orthopaedic Surgery, Okayama Rosai Hospital, Okayama, Japan. Electronic address: tanaka0896@gmail.com. 2. Department of Orthopaedic Surgery, Okayama Rosai Hospital, Okayama, Japan. 3. Department of Orthopaedic Surgery, Kawasaki Medical University, Kurashiki, Japan.
Abstract
BACKGROUND: Thoracolumbar corpectomy and percutaneous pedicle screw (PPS) fixation is becoming the standard method for correcting and stabilizing malalignment of spine, as is often seen in osteoporotic vertebral fracture. Nowadays, this procedure can be performed in a single lateral position with navigation. For an osteoporotic spine, accurate rod bending is necessary to prevent screw back-out. We describe a new technique using the spinal rod-bending system in a single lateral position. METHODS: A 71-year-old woman presented with severe back pain and impending paraplegia secondary to L1 osteoporotic vertebral fracture. We performed minimally invasive L1 corpectomy with an expandable vertebral cage and short-segment PPS with computer-assisted rod bending in a single lateral position under navigation guidance. RESULTS: The patient was successfully treated with surgery, and her low back pain improved. Her clinical outcomes improved; the Oswestry Disability Index went from 54% to 26%, and her low back pain visual analog scale score went from 78 mm to 19 mm at the 2-year final follow-up. CONCLUSIONS: Minimally invasive surgery thoracolumbar corpectomy using a computer-assisted spinal rod-bending system is a valuable technique to reduce screw back-out for osteoporotic vertebrae. With this new technique, the rod bending becomes easy, even for long PPS fusion with the severe osteoporotic or deformity patient in a single lateral position.
BACKGROUND: Thoracolumbar corpectomy and percutaneous pedicle screw (PPS) fixation is becoming the standard method for correcting and stabilizing malalignment of spine, as is often seen in osteoporotic vertebral fracture. Nowadays, this procedure can be performed in a single lateral position with navigation. For an osteoporotic spine, accurate rod bending is necessary to prevent screw back-out. We describe a new technique using the spinal rod-bending system in a single lateral position. METHODS: A 71-year-old woman presented with severe back pain and impending paraplegia secondary to L1 osteoporotic vertebral fracture. We performed minimally invasive L1 corpectomy with an expandable vertebral cage and short-segment PPS with computer-assisted rod bending in a single lateral position under navigation guidance. RESULTS: The patient was successfully treated with surgery, and her low back pain improved. Her clinical outcomes improved; the Oswestry Disability Index went from 54% to 26%, and her low back pain visual analog scale score went from 78 mm to 19 mm at the 2-year final follow-up. CONCLUSIONS: Minimally invasive surgery thoracolumbar corpectomy using a computer-assisted spinal rod-bending system is a valuable technique to reduce screw back-out for osteoporotic vertebrae. With this new technique, the rod bending becomes easy, even for long PPS fusion with the severe osteoporotic or deformity patient in a single lateral position.
Authors: Christoph Wipplinger; Sara Lener; Christoph Orban; Tamara M Wipplinger; Anto Abramovic; Anna Lang; Sebastian Hartmann; Claudius Thomé Journal: Acta Neurochir (Wien) Date: 2022-06-11 Impact factor: 2.816