Literature DB >> 33925899

Special Issue "Novel Research about Biomechanics and Biomaterials Used in Hip, Knee and Related Joints".

Jan Philippe Kretzer1, Catherine Van Der Straeten2.   

Abstract

Joint replacement is a very successful medical treatment [...].

Entities:  

Year:  2021        PMID： 33925899     DOI： 10.3390/ma14092222

Source DB:  PubMed          Journal:  Materials (Basel)        ISSN： 1996-1944            Impact factor:   3.623


  9 in total

1.  Musculoskeletal Multibody Simulation Analysis on the Impact of Patellar Component Design and Positioning on Joint Dynamics after Unconstrained Total Knee Arthroplasty.

Authors:  Maeruan Kebbach; Martin Darowski; Sven Krueger; Christoph Schilling; Thomas M Grupp; Rainer Bader; Andreas Geier
Journal:  Materials (Basel)       Date:  2020-05-21       Impact factor: 3.623

2.  The Effect of N, C, Cr, and Nb Content on Silicon Nitride Coatings for Joint Applications.

Authors:  Luimar Correa Filho; Susann Schmidt; Cecilia Goyenola; Charlotte Skjöldebrand; Håkan Engqvist; Hans Högberg; Markus Tobler; Cecilia Persson
Journal:  Materials (Basel)       Date:  2020-04-17       Impact factor: 3.623

Review 3.  What the Surgeon Can Do to Reduce the Risk of Trunnionosis in Hip Arthroplasty: Recommendations from the Literature.

Authors:  Claude B Rieker; Peter Wahl
Journal:  Materials (Basel)       Date:  2020-04-21       Impact factor: 3.623

4.  Long-Term Results of a Second-Generation, Small-Diameter, Metal-On-Metal Bearing in Primary Total Hip Arthroplasty at 14-year Follow-Up.

Authors:  Tobias Reiner; Matthias C Klotz; Kirsten Seelmann; Fabian Hertzsch; Moritz M Innmann; Marcus R Streit; Timo A Nees; Babak Moradi; Christian Merle; Jan Philippe Kretzer; Tobias Gotterbarm
Journal:  Materials (Basel)       Date:  2020-01-24       Impact factor: 3.623

5.  How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revision.

Authors:  Thomas M Grupp; Marc Baxmann; Volkmar Jansson; Henning Windhagen; Karl-Dieter Heller; Michael M Morlock; Hanns-Peter Knaebel
Journal:  Materials (Basel)       Date:  2020-03-02       Impact factor: 3.623

6.  The Effects of Cyclic Loading and Motion on the Implant-Cement Interface and Cement Mantle of PEEK and Cobalt-Chromium Femoral Total Knee Arthroplasty Implants: A Preliminary Study.

Authors:  Lennert de Ruiter; Raelene M Cowie; Louise M Jennings; Adam Briscoe; Dennis Janssen; Nico Verdonschot
Journal:  Materials (Basel)       Date:  2020-07-26       Impact factor: 3.623

7.  Model-Based Roentgen Stereophotogrammetric Analysis to Monitor the Head-Taper Junction in Total Hip Arthroplasty in Vivo-And They Do Move.

Authors:  Jing Xu; Robert Sonntag; J Philippe Kretzer; Dominic Taylor; Raimund Forst; Frank Seehaus
Journal:  Materials (Basel)       Date:  2020-03-27       Impact factor: 3.623

8.  Comparison of the Primary Stability of Porous Tantalum and Titanium Acetabular Revision Constructs.

Authors:  Nicholas A Beckmann; Rudi G Bitsch; Mareike Schonhoff; Klaus-Arno Siebenrock; Martin Schwarze; Sebastian Jaeger
Journal:  Materials (Basel)       Date:  2020-04-10       Impact factor: 3.623

9.  Titanium Acetabular Component Deformation under Cyclic Loading.

Authors:  Nicholas A Beckmann; Rudi G Bitsch; Theresa Bormann; Steffen Braun; Sebastian Jaeger
Journal:  Materials (Basel)       Date:  2019-12-20       Impact factor: 3.623
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.