Literature DB >> 33919530

Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications.

R A Ilyas1,2, S M Sapuan3,4, M M Harussani4, M Y A Y Hakimi4, M Z M Haziq4, M S N Atikah5, M R M Asyraf6, M R Ishak6, M R Razman7, N M Nurazzi8, M N F Norrrahim9, Hairul Abral10, Mochamad Asrofi11.   

Abstract

Over recent years, enthusiasm towards the manufacturing of biopolymers has attracted considerable attention due to the rising concern about depleting resources and worsening pollution. Among the biopolymers available in the world, polylactic acid (PLA) is one of the highest biopolymers produced globally and thus, making it suitable for product commercialisation. Therefore, the effectiveness of natural fibre reinforced PLA composite as an alternative material to substitute the non-renewable petroleum-based materials has been examined by researchers. The type of fibre used in fibre/matrix adhesion is very important because it influences the biocomposites' mechanical properties. Besides that, an outline of the present circumstance of natural fibre-reinforced PLA 3D printing, as well as its functions in 4D printing for applications of stimuli-responsive polymers were also discussed. This research paper aims to present the development and conducted studies on PLA-based natural fibre bio-composites over the last decade. This work reviews recent PLA-derived bio-composite research related to PLA synthesis and biodegradation, its properties, processes, challenges and prospects.

Entities:  

Keywords:  biocomposite; mechanical properties; natural fibres; polylactic acid (PLA)

Year:  2021        PMID： 33919530     DOI： 10.3390/polym13081326

Source DB:  PubMed          Journal:  Polymers (Basel)        ISSN： 2073-4360            Impact factor:   4.329


  27 in total

1.  Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures.

Authors:  Paweł Turek; Damian Filip; Łukasz Przeszłowski; Artur Łazorko; Grzegorz Budzik; Sławomir Snela; Mariusz Oleksy; Jarosław Jabłoński; Jarosław Sęp; Katarzyna Bulanda; Sławomir Wolski; Andrzej Paszkiewicz
Journal:  Polymers (Basel)       Date:  2022-05-31       Impact factor: 4.967

2.  Comparison of Properties of Poly(Lactic Acid) Composites Prepared from Different Components of Corn Straw Fiber.

Authors:  Zhongyu Qi; Baiwang Wang; Ce Sun; Minghui Yang; Xiaojian Chen; Dingyuan Zheng; Wenrui Yao; Yang Chen; Ruixiang Cheng; Yanhua Zhang
Journal:  Int J Mol Sci       Date:  2022-06-16       Impact factor: 6.208

Review 3.  Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications.

Authors:  R A Ilyas; M Y M Zuhri; H A Aisyah; M R M Asyraf; S A Hassan; E S Zainudin; S M Sapuan; S Sharma; S P Bangar; R Jumaidin; Y Nawab; A A M Faudzi; H Abral; M Asrofi; E Syafri; N H Sari
Journal:  Polymers (Basel)       Date:  2022-01-05       Impact factor: 4.329

Review 4.  3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review.

Authors:  M N M Azlin; R A Ilyas; M Y M Zuhri; S M Sapuan; M M Harussani; Shubham Sharma; A H Nordin; N M Nurazzi; A N Afiqah
Journal:  Polymers (Basel)       Date:  2022-01-03       Impact factor: 4.329

Review 5.  Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications.

Authors:  R A Ilyas; M Y M Zuhri; Mohd Nor Faiz Norrrahim; Muhammad Syukri Mohamad Misenan; Mohd Azwan Jenol; Sani Amril Samsudin; N M Nurazzi; M R M Asyraf; A B M Supian; Sneh Punia Bangar; R Nadlene; Shubham Sharma; Abdoulhdi A Borhana Omran
Journal:  Polymers (Basel)       Date:  2022-01-03       Impact factor: 4.329

Review 6.  Product Development of Natural Fibre-Composites for Various Applications: Design for Sustainability.

Authors:  Muhammad Rizal Muhammad Asyraf; Agusril Syamsir; Nazirul Mubin Zahari; Abu Bakar Mohd Supian; Mohamad Ridzwan Ishak; Salit Mohd Sapuan; Shubham Sharma; Ahmad Rashedi; Muhammad Rizal Razman; Sharifah Zarina Syed Zakaria; Rushdan Ahmad Ilyas; Mohamad Zakir Abd Rashid
Journal:  Polymers (Basel)       Date:  2022-02-25       Impact factor: 4.329

7.  3D-printed graphene polylactic acid devices resistant to SARS-CoV-2: Sunlight-mediated sterilization of additive manufactured objects.

Authors:  Flavio De Maio; Enrico Rosa; Giordano Perini; Alberto Augello; Benedetta Niccolini; Francesca Ciaiola; Giulia Santarelli; Francesca Sciandra; Manuela Bozzi; Maurizio Sanguinetti; Michela Sali; Marco De Spirito; Giovanni Delogu; Valentina Palmieri; Massimiliano Papi
Journal:  Carbon N Y       Date:  2022-03-16       Impact factor: 11.307

8.  Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties.

Authors:  M J Suriani; Hasliana Asyikin Zainudin; R A Ilyas; Michal Petrů; S M Sapuan; C M Ruzaidi; Rohani Mustapha
Journal:  Polymers (Basel)       Date:  2021-05-10       Impact factor: 4.329

9.  Development and Characterization of Polypropylene Waste from Personal Protective Equipment (PPE)-Derived Char-Filled Sugar Palm Starch Biocomposite Briquettes.

Authors:  M M Harussani; S M Sapuan; Umer Rashid; A Khalina
Journal:  Polymers (Basel)       Date:  2021-05-24       Impact factor: 4.329

Review 10.  Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants.

Authors:  R A Ilyas; S M Sapuan; M R M Asyraf; D A Z N Dayana; J J N Amelia; M S A Rani; Mohd Nor Faiz Norrrahim; N M Nurazzi; H A Aisyah; Shubham Sharma; M R Ishak; M Rafidah; M R Razman
Journal:  Polymers (Basel)       Date:  2021-05-23       Impact factor: 4.329
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.