C O Lima1, A F A Barbosa1, C M Ferreira1, M A Ferretti2, F H B Aguiar2, R T Lopes3, S R Fidel1, E J N L Silva1,4. 1. Department of Endodontics, School of Dentistry, State University of Rio de Janeiro (UERJ), Rio de Janeiro, Brazil. 2. Department of Restorative Dentistry, Piracicaba Dental School, University of Campinas, Campinas, Brazil. 3. Nuclear Engineering Program, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil. 4. Department of Endodontics, School of Dentistry, Grande Rio University (UNIGRANRIO), Rio de Janeiro, Brazil.
Abstract
AIM: To evaluate the influence of ultraconservative access cavities (UltraAC) on canal shaping and filling ability and load capacity of mandibular molars after root canal preparation with XP-endo Shaper (XP) or Reciproc (RC), under simulated clinical conditions. Traditional access cavities (TradAC) were used for comparison. METHODOLOGY: Forty extracted mandibular molars were scanned by micro-computed tomographic and, based on similar anatomical features, were divided into four groups (n = 10), according to the type of access cavity and canal instrumentation protocol: TradAC/RC, TradAC/XP, UltraAC/RC and UltraAC/XP. All root canal procedures were performed with the teeth placed in a dental mannequin. Teeth were scanned after root canal instrumentation and filling. Unprepared canal area, dentine removed, accumulated hard tissue debris (AHTD), canal transportation, presence of voids and filling material remnants within the pulp chamber were analysed. After restorative procedures, the teeth were subjected to thermomechanical cycling and to a load capacity test. Statistical analyses were performed using two-way anova test, considering the randomized blocks design (P < 0.05). RESULTS: The percentage of unprepared canal area was significantly lower in TradAC groups when compared to UltraAC groups (P < 0.05), regardless of the instrument used. The UltraAC/XP group had significantly lower percentage of root dentine removed when compared to other groups (P < 0.05). UltraAC/XP and TradAC/XP groups had significantly lower percentages of AHTD than UltraAC/RC and TradAC/RC groups (P < 0.05). Regarding canal transportation, in the MB root canals, the TradAC/XP group had significantly lower values than other groups (P < 0.05). In general, in ML and distal root canals, TradAC/XP and UltraAC/XP groups had significantly lower values of canal transportation when compared to other groups (P < 0.05). Moreover, the UltraAC/RC had the greatest canal transportation values in MB and distal canals. The UltraAC groups had significantly greater percentages of voids and volume of remaining root filling material within the pulp chamber after cleaning procedures than TradAC groups (P < 0.05). There was no difference in the load capacity amongst groups (P < 0.05). CONCLUSION: The UltraAC/XP and UltraAC/RC groups had significantly greater areas of unprepared canal walls, significantly more voids and volume of root filling material remnants within the pulp chamber after canal filling. UltraAC/XP was associated with significantly less root dentine removal and significantly more AHTD whilst TradAC/XP had overall significantly less canal transportation. No differences were observed in the load capacity amongst groups.
AIM: To evaluate the influence of ultraconservative access cavities (UltraAC) on canal shaping and filling ability and load capacity of mandibular molars after root canal preparation with XP-endo Shaper (XP) or Reciproc (RC), under simulated clinical conditions. Traditional access cavities (TradAC) were used for comparison. METHODOLOGY: Forty extracted mandibular molars were scanned by micro-computed tomographic and, based on similar anatomical features, were divided into four groups (n = 10), according to the type of access cavity and canal instrumentation protocol: TradAC/RC, TradAC/XP, UltraAC/RC and UltraAC/XP. All root canal procedures were performed with the teeth placed in a dental mannequin. Teeth were scanned after root canal instrumentation and filling. Unprepared canal area, dentine removed, accumulated hard tissue debris (AHTD), canal transportation, presence of voids and filling material remnants within the pulp chamber were analysed. After restorative procedures, the teeth were subjected to thermomechanical cycling and to a load capacity test. Statistical analyses were performed using two-way anova test, considering the randomized blocks design (P < 0.05). RESULTS: The percentage of unprepared canal area was significantly lower in TradAC groups when compared to UltraAC groups (P < 0.05), regardless of the instrument used. The UltraAC/XP group had significantly lower percentage of root dentine removed when compared to other groups (P < 0.05). UltraAC/XP and TradAC/XP groups had significantly lower percentages of AHTD than UltraAC/RC and TradAC/RC groups (P < 0.05). Regarding canal transportation, in the MB root canals, the TradAC/XP group had significantly lower values than other groups (P < 0.05). In general, in ML and distal root canals, TradAC/XP and UltraAC/XP groups had significantly lower values of canal transportation when compared to other groups (P < 0.05). Moreover, the UltraAC/RC had the greatest canal transportation values in MB and distal canals. The UltraAC groups had significantly greater percentages of voids and volume of remaining root filling material within the pulp chamber after cleaning procedures than TradAC groups (P < 0.05). There was no difference in the load capacity amongst groups (P < 0.05). CONCLUSION: The UltraAC/XP and UltraAC/RC groups had significantly greater areas of unprepared canal walls, significantly more voids and volume of root filling material remnants within the pulp chamber after canal filling. UltraAC/XP was associated with significantly less root dentine removal and significantly more AHTD whilst TradAC/XP had overall significantly less canal transportation. No differences were observed in the load capacity amongst groups.