Carlotta Trigila1, Eshani Moghe1, Emilie Roncali1,2. 1. Department of Biomedical Engineering, University of California Davis, Davis, CA, USA. 2. Department of Radiology, University of California Davis, Davis, CA, USA.
Abstract
PURPOSE: The need for high-fidelity modeling of radiation detectors to perform reliable detector performance optimization using Monte Carlo simulations requires to accurately simulate the light transport in the scintillator and the light collection by the photodetector. In this work, we implement our well-validated crystal reflectance model computed from three-dimensional (3D) crystal surface measurement in a standalone open-source application to allow researchers to generate fully customized crystal reflectance look-up-tables (LUTs) to be used in optical Monte Carlo simulation. METHODS: The LUTDavisModel application can be installed in a few minutes on Windows, macOS, and Linux, using 26 MB of space. MATLAB Runtime is required and is automatically installed with the application. The core algorithm has been previously validated experimentally and implemented in GATE v8.0. The standalone is divided into five panels, each of which performing a specific task: generate LUTs from a combination of surface type, scintillator, and coupling medium available in the database (such as LSO or BGO) or custom; compute LUTs with the reflectors available and custom coupling thickness; create a mixture of coupling media to account for possible defects in the optical coupling; plot precomputed LUTs for visual comparison. Tooltips and errors/warnings facilitate the navigation. The reported computational times were obtained with an Intel Core i7 MacBook Pro. RESULTS: LUTs can be generated with computational time ranging from a few minutes to several hours depending on the selected surface, sampling, and computational power. A longer time is needed when using rough surfaces and thick coupling media (hundreds of μ m ) due to increased photon tracking. CONCLUSIONS: We developed a user-friendly standalone application to generate LUTs that can be used inside GATE Monte Carlo simulations. It can be easily downloaded, installed, and used. Future optimizations will expand the database, decrease the computational time through greater parallelization, and include the generation of LUTs to study Cerenkov photons transport.
PURPOSE: The need for high-fidelity modeling of radiation detectors to perform reliable detector performance optimization using Monte Carlo simulations requires to accurately simulate the light transport in the scintillator and the light collection by the photodetector. In this work, we implement our well-validated crystal reflectance model computed from three-dimensional (3D) crystal surface measurement in a standalone open-source application to allow researchers to generate fully customized crystal reflectance look-up-tables (LUTs) to be used in optical Monte Carlo simulation. METHODS: The LUTDavisModel application can be installed in a few minutes on Windows, macOS, and Linux, using 26 MB of space. MATLAB Runtime is required and is automatically installed with the application. The core algorithm has been previously validated experimentally and implemented in GATE v8.0. The standalone is divided into five panels, each of which performing a specific task: generate LUTs from a combination of surface type, scintillator, and coupling medium available in the database (such as LSO or BGO) or custom; compute LUTs with the reflectors available and custom coupling thickness; create a mixture of coupling media to account for possible defects in the optical coupling; plot precomputed LUTs for visual comparison. Tooltips and errors/warnings facilitate the navigation. The reported computational times were obtained with an Intel Core i7 MacBook Pro. RESULTS: LUTs can be generated with computational time ranging from a few minutes to several hours depending on the selected surface, sampling, and computational power. A longer time is needed when using rough surfaces and thick coupling media (hundreds of μ m ) due to increased photon tracking. CONCLUSIONS: We developed a user-friendly standalone application to generate LUTs that can be used inside GATE Monte Carlo simulations. It can be easily downloaded, installed, and used. Future optimizations will expand the database, decrease the computational time through greater parallelization, and include the generation of LUTs to study Cerenkov photons transport.