Enhancing the specificity of chitin determinations through glucosamine analysis via ultra-performance LC-MS.

As chitin is gaining an increased attention as feedstock for industry, quantification thereof is becoming increasingly important. While gravimetric procedures are long, not specific and highly labour-intensive, acidic hydrolysis of chitin into glucosamine followed by quantification of the latter is more performant. Even though several quantification procedures for the determination of chitin can be found in the literature, they give inconsistent results and their accuracy was not assessed due to the lack of certified analytical standards. Therefore, in the present study, commercially available chitin from practical grade was characterised in detail, allowing the assessment of method accuracy. The procedure for the hydrolysis of chitin into glucosamine and subsequent quantification via UPLC-MS was investigated in detail as well. Using 9-fluorenylmethyl chloroformate (FMOC-Cl) as derivatisation reagent, glucosamine was quantified using reversed-phase chromatography. For the chitin hydrolysis, the highest glucosamine recovery was obtained with 8.0 M HCl for 2 h at 100 °C. The entire procedure for chitin quantification, including the hydrolysis, was characterised by high interday and intraday precision and accuracy. The specificity of the procedure was assessed as well by analysing different mixtures of cellulose and chitin. Chitin recoveries from these analyses ranged from 98.8 to 105.8% while no signal was observed for 100% cellulose, indicating the high specificity of the procedure. It was also concluded that the procedure is much faster and less labour-intensive compared to the gravimetric procedure.