Degree of conversion and dentin bond strength of light-cured multi-mode adhesives pretreated or mixed with sulfinate agents.

The influence of sulfinate agents applied as a dentin pretreatment or a mixture with multi-mode one-step self-etch adhesives (1-SEAs) on the degree of conversion (DC) and micro-tensile bond strength (μTBS) of light-cured 1-SEAs was investigated. 1-SEAs Clearfil Universal Bond Quick (UBQ) or Scotchbond Universal Adhesive (SBU) were applied to dentin in etch&rinse or self-etch mode using various application strategies: 1) no pretreatment, 2) pretreatment with 90 wt% ethanol, 3) pretreatment with a sulfinate agent Clearfil DC Activator (UDC) or Scotchbond Universal DCA (SDC), or 4) a mixture of UBQ+UDC or SBU+SDC. μTBS was measured after 24 h. Additionally, DC was measured using attenuated total reflectance Fourier-transform infrared spectroscopy. Pretreatment with sulfinate agents resulted in the highest μTBS and DC, significantly improving them especially in etch&rinse mode. The mixture of sulfinate agents with 1-SEAs was less effective. Pretreatment with ethanol significantly improved μTBS in etch&rinse mode but compromised μTBS in self-etch mode.