Literature DB >> 33629830

Ensemble Design of Electrode-Electrolyte Interfaces: Toward High-Performance Thin-Film All-Solid-State Li-Metal Batteries.

Cheng-Fan Xiao1, Jong Heon Kim1, Su-Ho Cho2, Yun Chang Park3, Min Jung Kim4, Kwun-Bum Chung4, Soon-Gil Yoon1, Ji-Won Jung2,5,6, Il-Doo Kim2,7, Hyun-Suk Kim1.   

Abstract

In accordance with the fourth industrial revolution (4IR), thin-film all-solid-state batteries (TF-ASSBs) are being revived as the most promising energy source to power small electronic devices. However, current TF-ASSBs still suffer from the perpetual necessity of high-performance battery components. While every component, a series of a TF solid electrolyte (i.e., lithium phosphorus oxynitride (LiPON)) and electrodes (cathode and Li metal anode), has been considered vital, the lack of understanding of and ability to ameliorate the cathode (or anode)-electrolyte interface (CEI) (or AEI) has impeded the development of TF-ASSBs. In this work, we suggest an ensemble design of TF-ASSBs using LiPON (500 nm), an amorphous TF-V2O5-x cathode with oxygen vacancies (Ovacancy), a thin evaporated Li anode (evp-Li) with a thickness of 1 μm, and an artificial ultrathin Al2O3 layer between evp-Li and LiPON. Well-defined Ovacancy sites, such as O(II)vacancy and O(III)vacancy, in amorphous TF-V2O5-x not only allow isotropic Li+ diffusion at the CEI but also enhance both the ionic and electronic conductivities. For the AEI, we employed protective Al2O3, which was specially sputtered using the facing target sputtering (FTS) method to form a homogeneous layer without damage from plasma. In regard to the contact with evp-Li, interfacial stability, electrochemical impedance, and battery performance, the nanometric Al2O3 layers (1 nm) were optimized at different temperatures (40, 60, and 80 °C). The TF-ASSB cell containing Al2O3 (1 nm) delivers a high specific capacity of 474.01 mAh cm-3 under 60 °C at 2 C for the 400th cycle, and it achieves a long lifespan as well as ultrafast rate capability levels, even at 100 C; these results were comparable to those of TF Li-ion battery cells using a liquid electrolyte. We demonstrated the reaction mechanism at the AEI utilizing time-of-flight secondary ion mass spectrometry (TOF-SIMS) and molecular dynamics (MD) simulations for a better understanding. Our design provides a signpost for future research on the rational structure of TF-LIBs.

Entities:  

Keywords:  LiPON; facing-target sputtering; lithium evaporation; thin-film batteries; vanadium oxide-based cathodes

Year:  2021        PMID: 33629830     DOI: 10.1021/acsnano.0c08691

Source DB:  PubMed          Journal:  ACS Nano        ISSN: 1936-0851            Impact factor:   15.881


  3 in total

Review 1.  Electrolyte Engineering for High-Voltage Lithium Metal Batteries.

Authors:  Liwei Dong; Shijie Zhong; Botao Yuan; Yuanpeng Ji; Jipeng Liu; Yuanpeng Liu; Chunhui Yang; Jiecai Han; Weidong He
Journal:  Research (Wash D C)       Date:  2022-08-21

2.  Improved Performance of All-Solid-State Lithium Metal Batteries via Physical and Chemical Interfacial Control.

Authors:  Jong Heon Kim; Kwangmo Go; Kyung Jin Lee; Hyun-Suk Kim
Journal:  Adv Sci (Weinh)       Date:  2021-11-10       Impact factor: 16.806

3.  Self-Powered, Long-Durable, and Highly Selective Oil-Solid Triboelectric Nanogenerator for Energy Harvesting and Intelligent Monitoring.

Authors:  Jun Zhao; Di Wang; Fan Zhang; Jinshan Pan; Per Claesson; Roland Larsson; Yijun Shi
Journal:  Nanomicro Lett       Date:  2022-08-05
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.