Literature DB >> 33622558

Lateral pterygoid muscle enthesis reconstruction in total temporomandibular joint replacement: An animal experiment with radiological correlation.

Nikolas De Meurechy1, Denis Verwilghen2, Yannick De Brucker3, Bert Van Thielen3, Maurice Y Mommaerts4.   

Abstract

A novel total temporomandibular joint replacement (TMJR) was developed with CADskills BV (Ghent, Belgium), aiming to achieve reinsertion of the (LPM) onto a scaffold in the implant. In order to investigate the possibility of reinsertion of the LPM, an animal experiment was conducted. An in vivo sheep experiment was conducted, which involved implanting sheep with a TMJR. Clinical parameters were recorded regularly and computed tomography (CT) scan images of two randomly selected sheep per scan were made at 1, 3, and 6 months. After 9.5 months, the sheep were euthanized, and CT scans of all animals were performed in order to evaluate the LPM's enthesis. A total of 13 sheep were implanted with a TMJR. One sheep was used as a sham. Radiographs revealed four outcome types of enthesis reconstruction. In four sheep, there was no reconstruction between the implant and the LPM. In three sheep, there was a purely soft tissue connection of 0.5-0.9 mm (average 0.7 mm) between the ostectomized bony LPM insertion and the implant's lattice structure. A combination of partial bony and partial soft tissue enthesis attachment (0.3-0.5 mm, average 0.4 mm) was found in three sheep. A bony ingrowth of the enthesis into the scaffold occurred in two sheep. A secondary bony connection between the mandible and the insertion of the LPM was found in 10 of 13 sheep. Four fossa components were found to be displaced, yet TMJ function remained in these ewes. The heterotopic ossification that was seen may be a confounding factor in these results. This in vivo experiment showed promising results for improving the current approach to TMJR with the possibility of restoring the laterotrusive function. The fossa displacement was considered to be due to insufficient fixation and predominant laterotrusive force not allowing for proper osseointegration. Further optimization of the reattachment technique, scaffold position and surface area should be done, as well as trials in humans to evaluate the effect of proper revalidation.
Copyright © 2021 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Animal experiment; Arthroplasty; Computed tomography; Joint prosthesis; Pterygoid muscles; Temporomandibular joint

Year:  2021        PMID: 33622558     DOI: 10.1016/j.jcms.2021.01.029

Source DB:  PubMed          Journal:  J Craniomaxillofac Surg        ISSN: 1010-5182            Impact factor:   2.078


  2 in total

1.  Surface wear in a custom manufactured temporomandibular joint prosthesis.

Authors:  Nikolas De Meurechy; Merve Kübra Aktan; Bart Boeckmans; Stijn Huys; Denis R Verwilghen; Annabel Braem; Maurice Y Mommaerts
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2022-01-28       Impact factor: 3.405

2.  Biomechanical evaluation of the human mandible after temporomandibular joint replacement under different biting conditions.

Authors:  Manuel Pinheiro; Robin Willaert; Afaq Khan; Anouar Krairi; Wim Van Paepegem
Journal:  Sci Rep       Date:  2021-07-07       Impact factor: 4.379

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.