Literature DB >> 33586666

On-chip high-definition bioprinting of microvascular structures.

Agnes Dobos1,2, Franziska Gantner1,2, Marica Markovic1,2, Jasper Van Hoorick3,4, Liesbeth Tytgat3,4, Sandra Van Vlierberghe3,4, Aleksandr Ovsianikov1,2,5.   

Abstract

'Organ-on-chip' devices which integrate three-dimensional (3D) cell culture techniques with microfluidic approaches have the capacity to overcome the limitations of classical 2D platforms. Although several different strategies have been developed to improve the angiogenesis within hydrogels, one of the main challenges in tissue engineering remains the lack of vascularization in the fabricated 3D models. The present work focuses on the high-definition (HD) bioprinting of microvascular structures directly on-chip using two-photon polymerization (2PP). 2PP is a nonlinear process, where the near-infrared laser irradiation will only lead to the polymerization of a very small volume pixel (voxel), allowing the fabrication of channels in the microvascular range (10-30 µm in diameter). Additionally, 2PP not only enables the fabrication of sub-micrometer resolution scaffolds but also allows the direct embedding of cells within the produced structure. The accuracy of the 2PP printing parameters were optimized in order to achieve high-throughput and HD production of microfluidic vessel-on-chip platforms. The spherical aberrations stemming from the refractive index mismatch and the focusing depth inside the sample were simulated and the effect of the voxel compensation as well as different printing modes were demonstrated. Different layer spacings and their dependency on the applied laser power were compared both in terms of accuracy and required printing time resulting in a 10-fold decrease in structuring time while yielding well-defined channels of small diameters. Finally, the capacity of 2PP to create vascular structures within a microfluidic chip was tested with two different settings, by direct embedding of a co-culture of endothelial- and supporting cells during the printing process and by creating a supporting, cell-containing vascular scaffold barrier where the endothelial cell spheroids can be seeded afterwards. The functionality of the formed vessels was demonstrated with immunostaining of vascular endothelial cadherin (VE-Cadherin) endothelial adhesion molecules in both static and perfused culture.

Entities:  

Mesh:

Substances:

Year:  2021        PMID: 33586666     DOI: 10.1088/1758-5090/abb063

Source DB:  PubMed          Journal:  Biofabrication        ISSN: 1758-5082            Impact factor:   9.954


  3 in total

Review 1.  Recent Advances in Additive Manufacturing and 3D Bioprinting for Organs-On-A-Chip and Microphysiological Systems.

Authors:  Mario Rothbauer; Christoph Eilenberger; Sarah Spitz; Barbara E M Bachmann; Sebastian R A Kratz; Eva I Reihs; Reinhard Windhager; Stefan Toegel; Peter Ertl
Journal:  Front Bioeng Biotechnol       Date:  2022-02-17

2.  Effect of Hydrogel Contact Angle on Wall Thickness of Artificial Blood Vessel.

Authors:  Wenyu Jin; Huanbao Liu; Zihan Li; Ping Nie; Guangxi Zhao; Xiang Cheng; Guangming Zheng; Xianhai Yang
Journal:  Int J Mol Sci       Date:  2022-09-21       Impact factor: 6.208

Review 3.  In Vitro Strategies to Vascularize 3D Physiologically Relevant Models.

Authors:  Alessandra Dellaquila; Chau Le Bao; Didier Letourneur; Teresa Simon-Yarza
Journal:  Adv Sci (Weinh)       Date:  2021-08-05       Impact factor: 16.806

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.