Yuwei Guo1, Sofia Apergi2,3, Nan Li1, Mengyu Chen1,4, Chunyang Yin5, Zhongcheng Yuan5, Feng Gao5, Fangyan Xie6, Geert Brocks2,3,7, Shuxia Tao8,9, Ni Zhao10. 1. Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong SAR, People's Republic of China. 2. Materials Simulation and Modelling, Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. 3. Center for Computational Energy Research, Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. 4. School of Electronic Science and Engineering, Xiamen University, Xiamen, People's Republic of China. 5. Biomolecular and Organic Electronics, Linköping University, Linköping, Sweden. 6. Instrumental Analysis and Research Centre, Sun Yat-sen University, Guangzhou, People's Republic of China. 7. Computational Materials Science, Faculty of Science and Technology and MESA+ Institute for Nanotechnology, University of Twente, Enschede, The Netherlands. 8. Materials Simulation and Modelling, Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. s.x.tao@tue.nl. 9. Center for Computational Energy Research, Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. s.x.tao@tue.nl. 10. Department of Electronic Engineering, The Chinese University of Hong Kong, Hong Kong SAR, People's Republic of China. nzhao@ee.cuhk.edu.hk.
Abstract
Perovskite light emitting diodes suffer from poor operational stability, exhibiting a rapid decay of external quantum efficiency within minutes to hours after turn-on. To address this issue, we explore surface treatment of perovskite films with phenylalkylammonium iodide molecules of varying alkyl chain lengths. Combining experimental characterization and theoretical modelling, we show that these molecules stabilize the perovskite through suppression of iodide ion migration. The stabilization effect is enhanced with increasing chain length due to the stronger binding of the molecules with the perovskite surface, as well as the increased steric hindrance to reconfiguration for accommodating ion migration. The passivation also reduces the surface defects, resulting in a high radiance and delayed roll-off of external quantum efficiency. Using the optimized passivation molecule, phenylpropylammonium iodide, we achieve devices with an efficiency of 17.5%, a radiance of 1282.8 W sr-1 m-2 and a record T50 half-lifetime of 130 h under 100 mA cm-2.
Perovskite light emittiical">ng n class="Disease">diodes suffer from poor operational stability, exhibiting a rapid decay of external quantum efficiency within minutes to hours after turn-on. To address this issue, we explore surface treatment of perovskite films with phenylalkylammonium iodide molecules of varying alkyl chain lengths. Combining experimental characterization and theoretical modelling, we show that these molecules stabilize the perovskite through suppression of iodide ion migration. The stabilization effect is enhanced with increasing chain length due to the stronger binding of the molecules with the perovskite surface, as well as the increased steric hindrance to reconfiguration for accommodating ion migration. The passivation also reduces the surface defects, resulting in a high radiance and delayed roll-off of external quantum efficiency. Using the optimized passivation molecule, phenylpropylammonium iodide, we achieve devices with an efficiency of 17.5%, a radiance of 1282.8 W sr-1 m-2 and a record T50 half-lifetime of 130 h under 100 mA cm-2.
Authors: Dongxin Ma; Petar Todorović; Shadi Meshkat; Makhsud I Saidaminov; Ya-Kun Wang; Bin Chen; Peicheng Li; Benjamin Scheffel; Rafael Quintero-Bermudez; James Z Fan; Yitong Dong; Bin Sun; Chao Xu; Chun Zhou; Yi Hou; Xiyan Li; Yuetong Kang; Oleksandr Voznyy; Zheng-Hong Lu; Dayan Ban; Edward H Sargent Journal: J Am Chem Soc Date: 2020-03-09 Impact factor: 15.419
Authors: Mike Pols; Tobias Hilpert; Ivo A W Filot; Adri C T van Duin; Sofía Calero; Shuxia Tao Journal: ACS Appl Mater Interfaces Date: 2022-08-30 Impact factor: 10.383