Albumin adsorption on alkyl chain derivatized polyurethanes. II. The effect of alkyl chain length.

Linear alkyl chains containing 2, 10 and 18 carbon atoms were grafted to 10% of the urethane nitrogens in a polyether-polyurethane. The polyurethane was synthesized from methylene bis(p-phenyl isocyanate), 1,4-butanediol, and polytetramethylene oxide of 1000 molecular weight in a molar ratio of 3/2/1. Fourier transform infrared spectroscopy and attenuated total reflectance optics were used to study the adsorption of 5.0 mg/ml human serum albumin (HSA) at 37 degrees C to the derivatized and non-derivatized polymers. Both delipidized HSA and HSA containing 6.5 mol stearic acid per mol of albumin were used to study the effect of chain length upon the initial adsorption rate, the total amount adsorbed in 1 h, and the desorption rate. The initial adsorption rates revealed that non-specific adsorption was similar upon all four polymers. An increase in initial adsorption rate upon the C-18 derivatized polymer was attributed to a specific binding interaction between the HSA and the grafted alkyl chains. The conformational stability of the HSA also affected the adsorption rate. The total amount adsorbed after 1 h decreased as the alkyl chain length increased from 2 to 18 methylene groups. The desorption rate decreased in magnitude as the alkyl chain length increased from C-2 to C-18. These results support a hypothesis that alkyl chain length influences the interaction between albumin and an alkylated polymer system.