The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling.

The additive manufacturing (AM) processes and technologies of 3D-printed materials and components using fused deposition modeling (FDM) are currently very popular and widely used for building parts and prototypes. Many manufacturing parameters can affect the strength and strain of the manufactured parts. The manufacturing parameters may be altered to reach an optimum setting for highly effective parts or components. This research studies the influence of the raster angle and the moisture content percentages on the mechanical properties of 3D printed polylactic acid (PLA) material. The three raster angles tested in this research were 0°, 45°, and 90°. The moisture content of the PLA material was altered to verify its effect on the mechanical properties. Twenty-seven specimens were subjected to tensile tests to examine the effect of different manufacturing parameters. The results show the specimens with a 90° raster angle and 10% moisture content have the optimum strength and strain mechanical properties.