Evaluation of various waste substrates for biofilm formation and subsequent use in aerobic packed-bed reactor for secondary treatment of domestic wastewater.

Immobilization of bacterial cells on suitable substrates is of utmost importance in the secondary treatment of wastewater using fixed-film reactors. Therefore, screening of efficient and cheaper materials for bacterial surface immobilization was carried out. Eleven waste materials were used as substrates, packed in a column, and bacterial surface immobilization was carried out using cow dung slurry/MLSS mixture. All the chosen substrates were screened for bacterial immobilization/biofilm formation by standard bacterial enumeration technique. The substrate with the highest biofilm-forming ability was used for secondary treatment of raw domestic wastewater. The results showed that high-density polyethylene and aluminium foil sheets have poor immobilizing characteristics with 2.2 × 108 and 2.4 × 108 CFU/cm2 respectively, whereas jute fibres were observed to be the most efficient among the substrates with 5.1 × 1023 CFU/cm2. The column packed with jute fibres was used for wastewater treatment. Various physico-chemical parameters were analyzed before and after treatment and there was a significant reduction in major parameters after treatment. The bacteria-immobilized jute fibres showed maximum immobilization potential and were highly efficient in wastewater treatment, and therefore these findings offer immense promise in the synthesis of composite polymers for bacterial immobilization and subsequent secondary treatment.