Literature DB >> 33375385

Comparative Assessment of In Vitro and In Vivo Biodegradation of Mg-1Ca Magnesium Alloys for Orthopedic Applications.

Iulian Antoniac1, Răzvan Adam2, Ana Biță1, Marian Miculescu1, Octavian Trante1, Ionuț Mircea Petrescu1, Mark Pogărășteanu3.   

Abstract

Use of magnesium implants is a new trend in orthopedic research because it has several important properties that recommend it as an excellent resorbable biomaterial for implants. In this study, the corrosion rate and behavior of magnesium alloys during the biodegradation process were determined by in vitro assays, evolution of hydrogen release, and weight loss, and further by in vivo assays (implantation in rabbits' bone and muscle tissue). In these tests, we also used imaging assessments and histological examination of different tissue types near explants. In our study, we analyzed the Mg-1Ca alloy and all the hypotheses regarding the toxic effects found in in vitro studies from the literature and those from this in vitro study were rejected by the data obtained by the in vivo study. Thus, the Mg-1Ca alloy represents a promising solution for orthopedic surgery at the present time, being able to find applicability in the small bones: hand or foot.

Entities:  

Keywords:  In vitro; In vivo; Mg-Ca alloy; SEM/EDS; biocompatibility; corrosion rate

Year:  2020        PMID: 33375385     DOI: 10.3390/ma14010084

Source DB:  PubMed          Journal:  Materials (Basel)        ISSN: 1996-1944            Impact factor:   3.623


  10 in total

1.  The Effect of Ca2+ and Mg2+ Ions Loaded at Degradable PLA Membranes on the Proliferation and Osteoinduction of MSCs.

Authors:  Sugoi Retegi-Carrión; Ana Ferrandez-Montero; Alvaro Eguiluz; Begoña Ferrari; Ander Abarrategi
Journal:  Polymers (Basel)       Date:  2022-06-15       Impact factor: 4.967

2.  Electrochemical and In Vitro Biological Evaluation of Bio-Active Coatings Deposited by Magnetron Sputtering onto Biocompatible Mg-0.8Ca Alloy.

Authors:  Ana-Iulia Bița; Iulian Antoniac; Marian Miculescu; George E Stan; Lucia Leonat; Aurora Antoniac; Bujor Constantin; Norin Forna
Journal:  Materials (Basel)       Date:  2022-04-25       Impact factor: 3.748

Review 3.  Magnesium-Based Alloys Used in Orthopedic Surgery.

Authors:  Iulian Antoniac; Marian Miculescu; Veronica Mănescu Păltânea; Alexandru Stere; Pham Hong Quan; Gheorghe Păltânea; Alina Robu; Kamel Earar
Journal:  Materials (Basel)       Date:  2022-02-02       Impact factor: 3.623

4.  Novel Mg-0.5Ca-xMn Biodegradable Alloys Intended for Orthopedic Application: An In Vitro and In Vivo Study.

Authors:  Corneliu Munteanu; Daniela Maria Vlad; Eusebiu-Viorel Sindilar; Bogdan Istrate; Maria Butnaru; Sorin Aurelian Pasca; Roxana Oana Nastasa; Iuliana Mihai; Stefan-Lucian Burlea
Journal:  Materials (Basel)       Date:  2021-11-27       Impact factor: 3.623

Review 5.  In silico modelling of the corrosion of biodegradable magnesium-based biomaterials: modelling approaches, validation and future perspectives.

Authors:  Aditya Joshi; George Dias; Mark P Staiger
Journal:  Biomater Transl       Date:  2021-09-28

6.  Rotator cuff repair with biodegradable high-purity magnesium suture anchor in sheep model.

Authors:  Yudie Chen; Yu Sun; Xinhui Wu; Jie Lou; Xiaonong Zhang; Zhaoxiang Peng
Journal:  J Orthop Translat       Date:  2022-09-10       Impact factor: 4.889

Review 7.  Surgical Classification for Preclinical Rat Femoral Bone Defect Model: Standardization Based on Systematic Review, Anatomical Analysis and Virtual Surgery.

Authors:  Yu Sun; Heike Helmholz; Regine Willumeit-Römer
Journal:  Bioengineering (Basel)       Date:  2022-09-15

8.  In Vivo Study of Local and Systemic Responses to Clinical Use of Mg-1Ca Bioresorbable Orthopedic Implants.

Authors:  Răzvan Adam; Iulian Antoniac; Silviu Negoiță; Cosmin Moldovan; Elena Rusu; Carmen Orban; Sorin Tudorache; Tudor Hârșovescu
Journal:  Diagnostics (Basel)       Date:  2022-08-14

9.  Comparative Study on the Corrosion Resistance of 6061Al and SiC3D/6061Al Composite in a Chloride Environment.

Authors:  Liang Yu; Shuangshuang Hao; Xiaodong Nong; Xiuling Cao; Chen Zhang; Yuan Liu; Yulong Yan; Yanli Jiang
Journal:  Materials (Basel)       Date:  2021-12-14       Impact factor: 3.623

10.  Fluoride Treatment and In Vitro Corrosion Behavior of Mg-Nd-Y-Zn-Zr Alloys Type.

Authors:  Pham Hong Quan; Iulian Antoniac; Florin Miculescu; Aurora Antoniac; Veronica Manescu Păltânea; Alina Robu; Ana-Iulia Bița; Marian Miculescu; Adriana Saceleanu; Alin Dănuț Bodog; Vicentiu Saceleanu
Journal:  Materials (Basel)       Date:  2022-01-12       Impact factor: 3.623

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.