Literature DB >> 33352725

Exertion Perception When Performing Cutting Tasks in Poultry Slaughterhouses: Risk Assessment of Developing Musculoskeletal Disorders.

Adriana Seára Tirloni1, Diogo Cunha Dos Reis2, Salvador Francisco Tirloni1, Antônio Renato Pereira Moro1,2.   

Abstract

Brazil is the leader in poultry meat exports, in which most products are in the form of cuts. This study analyzed the exertion perception of poultry slaughterhouses workers when performing cutting tasks, as well as the influence of knife sharpness on the risk of developing musculoskeletal disorders by Occupational Repetitive Action (OCRA) method. Participants (n = 101) from three slaughterhouses were asked to rate their perceived exertion on the Borg scale during the cutting task when the knife was well and poorly sharpened. The OCRA results showed that the score for cutting with a dull knife was greater (43.57 ± 13.51) than with a sharp knife (23.79 ± 3.10) (p < 0.001). Consequently, there was a significant increase in the risk level of acquiring upper-limb work-related musculoskeletal disorders (UL-WMSD) by using a "poorly sharpened" knife (29%; p < 0.001; Borg scale 2-8). Thus, maintaining well-sharpened knives for optimal performance of the cutting task (fewer technical actions) is suggested, as well as including knife sharpening in the standard operating procedure to reduce musculoskeletal disorders.

Entities:  

Keywords:  OCRA method; ergonomics; meat-packing industry; muscular disorders; risk assessment; slaughterhouse

Mesh:

Year:  2020        PMID: 33352725      PMCID: PMC7766802          DOI: 10.3390/ijerph17249534

Source DB:  PubMed          Journal:  Int J Environ Res Public Health        ISSN: 1660-4601            Impact factor:   3.390


  24 in total

1.  The influence of knife dullness on poultry processing operator exertions and the effectiveness of periodic knife steeling.

Authors:  R L Szabo; R G Radwin; C J Henderson
Journal:  AIHAJ       Date:  2001 Jul-Aug

2.  Accuracy of the Borg CR10 scale for estimating grip forces associated with hand tool tasks.

Authors:  Raymond W McGorry; Jia-Hua Lin; Patrick G Dempsey; Jeffrey S Casey
Journal:  J Occup Environ Hyg       Date:  2010-05       Impact factor: 2.155

3.  A technique for field measurement of knife sharpness.

Authors:  Raymond W McGorry; Peter C Dowd; Patrick G Dempsey
Journal:  Appl Ergon       Date:  2005-09       Impact factor: 3.661

4.  Using pliers in assembly work: short and long task duration effects of gloves on hand performance capabilities and subjective assessments of discomfort and ease of tool manipulation.

Authors:  Iman Dianat; Christine M Haslegrave; Alex W Stedmon
Journal:  Appl Ergon       Date:  2011-07-20       Impact factor: 3.661

Review 5.  Work factors and upper limb disorders.

Authors:  P W Buckle
Journal:  BMJ       Date:  1997-11-22

6.  Improving meat cutters' work: changes and effects following an intervention.

Authors:  K Vogel; J Karltun; J Eklund; I-L Engkvist
Journal:  Appl Ergon       Date:  2013-05-03       Impact factor: 3.661

7.  Objective assessment of knife sharpness over a working day cutting meat.

Authors:  Adriana Savescu; Aude Cuny-Guerrier; Pascal Wild; Gilles Reno; Agnès Aublet-Cuvelier; Laurent Claudon
Journal:  Appl Ergon       Date:  2017-11-16       Impact factor: 3.661

8.  [Results of risk and impairment assessment in groups of workers exposed to repetitive strain and movement of the upper limbs in various sectors of industry].

Authors:  Daniela Colombini; E Occhipinti
Journal:  Med Lav       Date:  2004 May-Jun       Impact factor: 1.275

9.  The effect of workstation and task variables on forces applied during simulated meat cutting.

Authors:  Raymond W McGorry; Patrick G Dempsey; Niall V O'Brien
Journal:  Ergonomics       Date:  2004-12       Impact factor: 2.778

10.  Association between perception of bodily discomfort and individual and work organisational factors in Brazilian slaughterhouse workers: a cross-sectional study.

Authors:  Adriana Seára Tirloni; Diogo Cunha Dos Reis; Adriano Ferreti Borgatto; Antônio Renato Pereira Moro
Journal:  BMJ Open       Date:  2019-03-01       Impact factor: 2.692

View more
  1 in total

Review 1.  Cutting force measurement: Hand tool instrumentation used in slaughterhouses - a systematic review.

Authors:  Salvador Francisco Tirloni; Adriana Seára Tirloni; Nestor Roqueiro; Eugenio Andrés Díaz Merino; Giselle Schmidt Alves Díaz Merino; Antônio Renato Pereira Moro
Journal:  EXCLI J       Date:  2021-04-13       Impact factor: 4.068

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.