Considerations for Group Testing: A Practical Approach for the Clinical Laboratory.

Group testing, also known as pooled sample testing, was first proposed by Robert Dorfman in 1943. While sample pooling has been widely practiced in blood-banking, it is traditionally seen as anathema for clinical laboratories. However, the ongoing COVID-19 pandemic has re-ignited interest for group testing among clinical laboratories to mitigate supply shortages. We propose five criteria to assess the suitability of an analyte for pooled sample testing in general and outline a practical approach that a clinical laboratory may use to implement pooled testing for SARS-CoV-2 PCR testing. The five criteria we propose are: (1) the analyte concentrations in the diseased persons should be at least one order of magnitude (10 times) higher than in healthy persons; (2) sample dilution should not overly reduce clinical sensitivity; (3) the current prevalence must be sufficiently low for the number of samples pooled for the specific protocol; (4) there is no requirement for a fast turnaround time; and (5) there is an imperative need for resource rationing to maximise public health outcomes. The five key steps we suggest for a successful implementation are: (1) determination of when pooling takes place (pre-pre analytical, pre-analytical, analytical); (2) validation of the pooling protocol; (3) ensuring an adequate infrastructure and archival system; (4) configuration of the laboratory information system; and (5) staff training. While pool testing is not a panacea to overcome reagent shortage, it may allow broader access to testing but at the cost of reduction in sensitivity and increased turnaround time.