| Literature DB >> 33326508 |
Christian Eisenhawer1, Monika Raulf1, Rolf Merget1.
Abstract
Diisocyanates continue to be one of the most frequent causes of occupational asthma worldwide. They are still indispensable in industrial use as components of coatings, glues, and polyurethane foams. In Germany, respiratory diseases due to diisocyanates can be compensated by the statutory accident insurance (according to BK-Nr. 1315). The present case report shows a rare case of sensitization against diisocyanates verified by skin prick test and serological testing. Due to these findings, a modified inhalation test with an extremely low initial diisocyanate concentration in the laboratory was performed, and a positive reaction could be detected already after an extremely low diisocyanate concentration. In addition, increases of fractional exhaled nitric oxide (FeNO) and eosinophils in induced sputum after inhalation testing were seen. The present case constellation underlines the particular importance of allergological tests for diagnostic clarification of the diagnosis of diisocyanate asthma. © Dustri-Verlag Dr. K. Feistle.Entities:
Keywords: diisocyanates; inhalation test; occupational asthma; prevention ; sensitization
Year: 2020 PMID: 33326508 PMCID: PMC7734869 DOI: 10.5414/ALX02133E
Source DB: PubMed Journal: Allergol Select ISSN: 2512-8957
Antigen-specific antibodies in serum. Specific IgE concentrations ≥ 0.35 kU/L are considered positive.
| ImmunoCAP | Concentration | |
|---|---|---|
| Total IgE | 144 kU/L | |
| Specific IgE | Isocyanate TDI | 3.38 kU/L |
| Isocyanate MDI | 11.9 kU/L | |
| Isocyanate HDI | 6.86 kU/L | |
| Maltose-binding protein (MPB) | 0.00 kU/L | |
| Human serum albumin | 0.01 kU/L | |
| Specific IgE | Isocyanate TDI | < 2 |
| Isocyanate MDI | 7.06 mg/L | |
| Isocyanate HDI | < 2 | |
Figure 1.Standard diisocyanate inhalation test protocol. Blue columns represent diisocyanate testing, red arrows mark the time points of lung function measurements. ppb = parts per billion.
Figure 2.Modified diisocyanate inhalation test protocol. Blue columns represent diisocyanate testing, red arrows mark the time points of lung function measurements. ppb = parts per billion.
Figure 3.Effect parameters before, 20 minutes, and 24 hours after inhalation testing. sRt = specific airway resistance; FEV1 = forced expiratory volume in 1 second; eNO = exhaled nitric oxide; ppb = parts per billion.