A real-time PCR assay for rapid identification of inducible and acquired clarithromycin resistance in Mycobacterium abscessus.

BACKGROUND: Mycobacterium abscessus is a rapidly growing mycobacteria involved in severe infections of the lung, skin, or soft tissue. Macrolides such as clarithromycin are the recommended first line drugs for treatment of M. abscessus infections. However, M. abscessus has dual mechanisms of resistance to macrolides, making treatment by macrolides difficult. A functional erm(41) gene confers for inducible resistance while acquired mutations on the 23S rRNA rrl gene confer for constitutive resistance.
METHODS: We have developed a real-time PCR assay to detect both inducible and acquired resistance to clarithromycin, and compared the results to traditional erm(41) and rrl sequencing and phenotypic susceptibility testing using Sensititre™ plates.
RESULTS: Of the total 126 M. abscessus isolates tested, truncated erm(41) was found in 23/126 (18.3%) of the samples, 27/126 (21.4%) had a T28C mutation in erm(41), and 2/126 (1.6%) had an acquired A2058C mutation in rrl. The phenotypic results correlated with the expected sequencing results in 121/126 samples (96%). Phenotypic testing compared to real-time PCR resolved 2 of these discrepancies by showing the existence of both erm(41) alleles in the isolates that sequencing missed. One culture was found to be mixed with two M. abscessus subsp. as per hsp65 sequencing and 2 isolates had discordance between molecular and phenotypic results. It was presumed that 3 isolates showed discrepancy between sequencing and real-time PCR, but one culture was mixed and other 2 detected both alleles by real-time PCR leading to 100% concordance when compared to sequencing.
CONCLUSION: In conclusion, real-time PCR is more accurate for detection of both acquired and induced clarithromycin resistance, specifically when mixed genic profiles are present in a sample.

Background

As per former and accepted taxonomy, the rapidly growing Mycobacterium abscessus is subdivided to 3 subspecies M. abscessus subsp. abscessus, M. abscessus subsp. bolletii, and M. abscessus subsp. massiliense which are involved in infections of the skin, lung, as well as infections associated with medical procedures [1, 2]. These infections are commonly treated with macrolides (clarithromycin, azithromycin and erythromycin) but resistance to macrolides makes treatment increasingly difficult [3, 4]. M. abscessus infections management may require multi-drug therapy along with intravenous treatment for several months. Intravenous agents such as amikacin are commonly associated with side effects in patients [5]. Identifying resistance earlier can determine the best suited treatment. According to the Clinical Laboratory Standard Institute (CLSI), drug susceptibility testing for clarithromycin require an incubation time of up to 14 days to assess inducible resistance [6].

Natural and acquired resistance to clarithromycin are due to the erythromycin ribosomal methyl transferase, erm(41), and the gene encoding a 23S peptidyl transferase in the large 23S ribosomal subunit, rrl, respectively [7-9]. Inducible resistance occurs naturally with a functional erm(41) gene [7]. However, a common trait of M. abscessus subsp. massiliense isolates is that they have a 274-bp deletion in erm(41), making it non-functional, hence susceptible to macrolides [7]. Thus, M. abscessus subspecies identification and determination of macrolide susceptibility are useful in the planning of the appropriate treatment. Another mutation, the T to C mutation at position 28 on erm(41) also leads to a non-functional erythromycin ribosomal methyl transferase [7]. When inducible resistance occurs, drug susceptibility testing will show susceptibility in vitro at day 3 but will later develop resistance up to 14 days post-incubation. Clinically acquired resistance to a macrolide occurs from a spontaneous mutation at positions 2058 and 2059 on the rrl gene of 23S, which causes an alteration to the drug binding pocket of the protein [8, 9]. Constitutive resistance will result in a high minimum inhibitory concentration (MIC) at day 3 of susceptibility testing. As reported by Vester et al. (2001), acquired mutations at positions 2057 and 2611 on rrl can also result in low level resistance due to being in close proximity to the action centre [10]. These mutations are outside the focal point of macrolide interaction but can still disrupt the structure of the drug binding pocket, reducing its ability to inhibit the ribosome [10].

Sequencing of 16S and hsp65 (heat shock protein 65) genes was also used to identify the different subspecies of M. abscessus. Sequencing of erm(41) and rrl was done and probes for real-time PCR were designed to look for possible mutations that would cause resistance to clarithromycin. A real-time PCR assay was designed to run under a single condition which would greatly decrease the turnaround time of 14 days using phenotypic testing, to just a few hours to predict resistance to clarithromycin. Real-time PCR assay was also compared to the sequencing method currently used in our laboratory.

Methods

Identification of M. abscessus subspecies

M. abscessus isolates identification was performed using 16S gene sequencing and the subsp. identification was done using sequencing of the hsp65 gene. PCR amplification was done in a 50 μL reaction volume consisting of 47.5 μL premix (1 μM forward primer, 1 μM reverse primer), 0.25 μL of Qiagen Taq DNA polymerase (Qiagen, Hilden, Germany), and 2.5 μL of template DNA (Table 1). Amplification was done using the Applied Biosystems Veriti® 96-Well Thermal Cycler (Thermo Fisher Scientific, Applied Biosystems, Grand Island, NY). Thermocycler conditions for hsp65 were 95 °C for 5 min, 45 cycles of 95 °C for 1 min, 60 °C for 1 min, and 72 °C for 1 min, followed by 72 °C for 5 min. The PCR products were purified using PCRClean DX magnetic beads (Aline Biosciences, Woburn, MA). Sequencing was done using Applied Biosystems 3730xl DNA Analyzer (Thermo Fisher Scientific, Applied Biosystems, Grand Island, NY). Sequences were assembled using Lasergene SeqMan Pro (DNAStar, Inc., Madison, WI) and sequence comparison was done using BioNumerics 7.6.2 software. Reference strains Mycobacterium abscessus subsp. abscessus ATCC 19977T, Mycobacterium abscessus subsp. bolletii CCUG 50184T, and Mycobacterium abscessus subsp. massiliense CCUG 48898T were used.

Table 1

Primers used for sequencing of hsp65, erm(41) and rrl of the M. abscessus

Primer	Target Gene	Sequence	Annealing Temp (°C)	Reference
TB11	hsp65	5′-ACCAACGATGGTGTGTCCAT-3’	60	[11]
TB12	hsp65	5′-CTTGTCGAAGGCCATACCCT-3’	60	[11]
ermF	erm(41)	5′-GACCGGGGCCTTCTTCGTGAT-3’	60	[12]
ermR1	erm(41)	5′-GACTTCCCCGCACCGATTCC-3’	60	[12]
erm41–2	erm(41)	5′-GGATTCCGGCGTCAAGAGACTC-3’	60	[9]
erm41–3	erm(41)	5′-CGAGCCCGCCCTACCAAGTCAC-3’	60	[7]
erm41–4	erm(41)	5′-CCGGCCCGTAGCGTCCAATG-3’	60	[13]
erm41–5	erm(41)	5′-ACTCCCCTGAGCGA ACAC-3’	60	[7]
19F	rrl	5′-GTAGCGAAATTCCTTGTCGG-3’	55	[14]
21R	rrl	5′-TTCCCGCTTAGATGCTTTCAG-3’	55	[14]
SP1	rrl	5′-CCTGCACGAATGGCGTAACG-3’	55	[15]
SP2mod	rrl	5′-CACCAGAGGTTCGTCCGTC-3’	55	[15]

Antimicrobial susceptibility testing

Phenotypic susceptibility testing for clarithromycin was done using Sensititre™ RAPMYCO AST plates (Trek Diagnostics, Thermo Fisher Scientific, Oakwood Village, OH) according to the manufacturer instructions. Plates were examined for the drug MICs on day 3 (and day 5 if growth in positive control well was not adequate) of incubation then further incubation at 30 °C was done if day 3 or 5 results showed sensitivity. Plates were examined for inducible resistance on day 7, 10 and 14 of incubation.

Sequencing of erm(41) and rrl genes

PCR amplification was done in a total reaction volume of 50 μL which consisted of 25 μL Amplitaq Gold® 360 Mastermix (Thermo Fisher Scientific, Applied Biosystems, Foster City, CA), 22.5 μL forward and reverse primers (final concentration of 1 μM each), and 2.5 μL of template DNA for both erm(41) and rrl genes. Primers ermF and ermR1 were used to amplify the erm(41) gene while primers 19F and 21R amplified the rrl gene (Table 1). Thermocycler conditions for amplifying erm(41) were 95 °C for 7.5 min for the initial denaturation, followed by 35 cycles of 95 °C for 30 s, 60 °C for 30 s, and 72 °C for 30 s followed by a final extension of 72 °C for 10 min. Conditions were the same for rrl except with an annealing temperature of 55 °C instead of 60 °C. The PCR products were purified using PCRClean DX magnetic beads. Sequencing primers are shown in Table 1. Sequencing and analysis were done as described above for hsp65 gene.

Real-time PCR assay

A 96-well plate assay was designed based on a modified protocol from Shamira Shallom and colleagues (2015) [11]. The probe, Absc-chel 16S, was used for identification, erm(41)_probe1 was used to detect full-length erm(41), SNPs on position 28 of erm(41) were detected using probes erm(41)T28 and erm(41)C28, SNPs on position 2058 of rrl were detected using probes 23S_A2058 and 23S_C2058 (Table 2). Probes for rrl, 23S_A2058 and 23S_C2058, initially consisted of LNA (locked nucleic acids) from the Shallom protocol, however, the rrl probes used in this experiment were modified. This change would see a lower melting temperature for these probes and therefore, the 5′ end of these probes were extended by 7 base pairs using Mabs5 23S rRNA (GenBank accession number EU980535.1) to ensure the same melting temperature of around 60 °C. Probes were made to a working concentration of 2.5 μM in a mix with their corresponding primers (Table 2) which were diluted to 10 μM. Reactions were done in a total reaction volume of 25 μL consisting of 12.5 μL TaqMan® Fast Advanced Master Mix (Thermo Fisher Scientific, Life Technologies, Austin, TX.), probes final concentration of 250 nM and forward and reverse primers at final concentration of 1 μM each, and 3.75 μL of template DNA. Each sample was run in duplicates with positive control for all wild type and mutants i.e., 16S, full length erm(41), T28T in erm(41), T28C in erm(41), A2058A in rrl, and A2058C in rrl and negative control (no sample DNA). Real-time PCR was done using the Applied Biosystems QuantStudio 3 Real-Time PCR System (Thermo Fisher Scientific, Applied Biosystems, Grand Island, NY). Thermocycler conditions included an initial denaturation of 95 °C for 3 min, 40 cycles of 95 °C for 30 s, 60 °C for 30 s, and 72 °C for 30 s.

Table 2

Probes and primers used in the real-time assay for M. abscessus

Target		Sequence	Reference
16S	Absc-chel 16S	5′-6FAM-ACC ACA CAC TTC A-MGB-NFQ-3’	[16]
	F Primer16S	5′-ATAAGCCTGGGAAACTGGGTCTA-3’
	R Primer16S	5′-CCACACCGCAAAAGCTTT-3’
Full length erm(41)	erm(41)_probe1	5′-6FAM-TGC TAG CCG TCG AGC TGC ATC C-QSY-3’	[17]
	F PrimerTR	5′-TCAGGGGAGTTCGTTGTGGAT-3’
	R PrimerTR	5′-TCTTCCTCGGCAAACCGT-3’
erm(41)	erm(41)T28	5′-HEX-CCA + G + T + G GGG C-IABkFQ-3’	[12]
	erm(41)C28	5′-6FAM-CCA + G + C + G GGGC-IABkFQ-3’
	F PrimerE28	5′-GAGCATGGGCATATTCATGATGG-3’
	R PrimerE28	5′-TGAGCGAACACCGGATTCG-3’
rrl	23S_A2058	5′-6FAM-CGGCAGGACGAAAAGACCC-BHQ1–3’	[12]
	23S_C2058	5′-6FAM-CGGCAGGACGACAAGACCC-BHQ1–3’
	F PrimerR2058	5′-GCGAAATTGCACTACGAGTAAAG-3’
	R PrimerR2058	5′-CCTATCCTACACAAACCGAACC-3’

MGB minor groove binder, HEX hexachlorofluorescein, 6FAM 6-carboxyfluorescein, IABkFQ Iowa Black fluorescent quencher, BHQ1 Black Hole quencher, NFQ Non-fluorescent Quencher, +, LNA bases

Results

The hsp65 sequences were compared using Bionumerics version 7.6.2 (Applied Math, Belgium). Sequential differences in hsp65 were used to distinguish the three members of M. abscessus as described in Kazue Nakanaga et al. (2014) [18]. It was found that in our 126 samples, 94 were identified as M. abscessus subsp. abscessus, 7 M. abscessus subsp. bolletii, 23 M. abscessus subsp. massiliense, and 2 showed the coexistence of two mixed DNA populations belonging to M. abscessus subspecies.

Clarithromycin susceptibility testing using microbroth dilution assay found that of the 126 isolates, 3 were resistant on day 3 (2 M. abscessus subsp. abscessus, 1 M. abscessus subsp. massiliense), 76 were inducibly resistant (70 M. abscessus subsp. abscessus, 5 M. abscessus subsp. bolletii, 1 M. abscessus subsp. massiliense). One isolate with intermediate result (M. abscessus subsp. abscessus) was repeated with an updated phenotypic result showing susceptible result giving a total of 47 susceptible results (22 M. abscessus subsp. abscessus, 2 M. abscessus subsp. bolletii, 21 M. abscessus subsp. massiliense, 2 mixed by hsp65 sequencing) (Table 3). Inducible resistance is characterized by an MIC of 8 or greater observed on day 7 and up to day 14 after an initial result of susceptibility at day 3 [19].

Table 3

Clarithromycin Minimum Inhibitory Concentration (MIC) interpretations for M. abscessus isolates

	MIC Interpretation
hsp65 Identification	S	IR	R	Total
M. abscessus subsp. abscessus	22a	70	2	94a
M. abscessus subsp. bolletii	2	5	–	7
M. abscessus subsp. massiliense	21	1	1	23
M. abscessus subspecies mixed	2	–	–	2
Total	47	76	3	126

S, Sensitive (MIC ≤2); IR, Inducible Resistance (MIC ≥8 on day 7 or later of susceptibility testing); R, Resistant (MIC ≥8 on day 3 of susceptibility testing); a2 mixed cultures of M. abscessus subsp. abscessus, each found to have both wild type T28 and mutation C28 in erm(41)

Sequencing of erm(41) and rrl for mutations

Sequencing found that 23 samples had the 274-bp deletion on erm(41). Twenty-two of which were found to be in the subspecies M. abscessus subsp. massiliense. One was in a mixed population containing Mycobacterium abscessus subsp. massiliense (Table 4). Twenty-seven strains had the T28C mutation in erm(41) (24 M. abscessus subsp. abscessus, 2 M. abscessus subsp. bolletii, and 1 mixed) and 2 strains harboured a A2058C mutations on rrl (1 M. abscessus subsp. abscessus and 1 M. abscessus subsp. massiliense) (Table 4). Five strains (M. abscessus subsp. abscessus) had discrepant results which had phenotypic results that did not match with the mutation found with sequencing, which have been explained in the discussion section.

Table 4

Comparisons of mutations found in erm(41) and rrl for each subspecies of the M. abscessus using sequencing and real-time PCR

Phenotypic Result			Sequencing Results			Real-time PCR Results
Subspecies	# of Samples		Full-length/truncated erm41	erm41 position 28	rrl position 2058	Full-length/truncated erm41	erm41 position 28	rrl position 2058
M. abscessus subsp. abscessus
	67	IR	Full	T	A	Full	T	A
	1	Ra	Full	T	A	Full	T	A
	1	Sa	Full	T	A	Full	T	A
	1	R	Full	T	C	Full	T	C
	21	S	Full	C	A	Full	C	A
	2	IR	Full	C	A	Full	T + C	A
	1	IRa	Full	C	A	Full	C	A
M. abscessus subsp. bolletii
	5	IR	Full	T	A	Full	T	A
	2	S	Full	C	A	Full	C	A
M. abscessus subsp. massiliense
	21	S	Truncated	T	A	Truncated	T	A
	1	R	Truncated	T	C	Truncated	T	C
	1	IR	Full	T	A	Full	T	A
b M. abscessus
	1	S	Full	C	A	Full	C	A
	1	S	Truncated	T	A	Full	C	A

a Discrepant phenotypic result to what was expected with real-time results

b M. abscessus subspecies with two hsp65 gene sequences

Our real-time assay was optimized by modifying Shallom 2015 protocol. Our method ran all of the targeted mutations of a sample on a single plate and under the same PCR conditions which include detection of full-length erm(41). Shallom et al. used a SYBR green quantitative method separate from their probe based one for detecting full-length erm(41). Additionally, we used a probe for species confirmation in our assay, making our assay far more informative in a single run. The probes for the rrl targets originally consisted of LNA bases, but due to availability, ours consist of regular DNA bases. The probes’ length was then changed from 12 to 19 base pairs to ensure a matching melting temperature with other reactions on the plate. This has impact on the real-time PCR conditions as we intend to multiplex this assay at a later date. Black Hole quencher probe tags were also used in place of Iowa Black fluorescent tags for the modified rrl probes. These modified probes were locally produced in our facility and therefore more cost effective and allowed the assessment of different probe and conditions. Results of the real-time assay showed amplification for all our targets using the aforementioned probes under the same cycling conditions. Successful detection in our rrl targets informs us that LNA bases in probes is not necessary to perform this assay. Crossing threshold (CT) values were found to range between 16 and 24 cycles for different reactions (Fig. 1). Samples were run in duplicates and CT values of duplicates showed minimal variability of one CT with orange color having slightly more variability between duplicates.

Fig. 1

Example of the amplification plot for a sample showing detection of a full-length erm(41) with the T allele and a wildtype rrl gene (Probe TRNC1 detects full-length erm(41) and allows us to determine if the gene is truncated or full-length, 16sabsc verifies M. abscessus identification and near neighbors, T28T and T28C detects the 2 alleles on position 28 of erm(41), and 2058Crrl and WTrrl for alleles on rrl)

When real-time PCR assay was compared to sequencing, one discrepant sample had a truncated erm(41) gene with the T allele with sequencing, but real-time PCR showed detection of a full-length gene and a C allele. Both methods found no mutations on position 2058 of the rrl gene. This strain was found to be mixed with M. abscessus subsp. abscessus and M. abscessus subsp. massiliense as per hsp65 sequencing data. Two isolates of M. abscessus subsp. abscessus had discordant sequencing and phenotypic results, with both T and C alleles of erm(41) amplified with real-time PCR and only T28C mutation with sequencing. Hence, only sequencing showed discrepancy to the phenotypic results but real-time PCR did not as the latter detected both alleles. Real-time PCR results resolved all these three discrepancies.

Discussion

Clarithromycin is an important antibiotic against members of the M. abscessus [3]. Resistance to macrolide can be predominantly correlated with two genes, erm(41) and rrl in M. abscessus. The full erm(41) gene that is without the 274 bp deletion and T at position 28 will result in a functional erythromycin ribosomal methyl transferase and hence show inducible resistance [7]. Extended periods of incubation in the antibiotic will induce resistance in M. abscessus isolates that have an inducible resistance genic profile. An acquired point mutation on positions 2058 and/or 2059 of rrl will result in high level resistance against clarithromycin by altering the drug binding domain of the 23S rRNA [8, 9]. These are characteristically shown by resistance (MIC ≥8) on day 3 of antimicrobial susceptibility testing and hence indicate constitutive resistance.

Phenotypic susceptibility testing was done by broth microdilution and samples were incubated for up to 14 days [6]. Initial testing found that 79 (62.7%) samples were resistant of which 76 (60.3%) showed inducible resistance. Forty-six were initially shown to be susceptible at day 3; however, one sample with an initial intermediate result was repeated and showed to be sensitive for a total of 47 (37.3%) sensitive samples. For this intermediate sample, molecular methods found it to have a T28C mutation so a susceptible result was expected and overgrowth in the initial phenotypic testing may be the cause for the intermediate reading. In the 2 strains that were determined to be mixed by hsp65 sequencing, both were susceptible to clarithromycin.

Sequencing of erm(41) and rrl identified 27 strains (21.4%) with a T28C mutation, 23 (18.3%) had a truncated erm(41) gene and 2 (1.6%) with the A2058C mutation on rrl. The 274-bp deletion on erm(41) was identified in only M. abscessus subsp. massiliense and 1 mixed M. abscessus sample containing M. abscessus subsp. massiliense. This deletion is characteristic of M. abscessus subsp. massiliense as reported by Hee-youn Kim et al. (2010) which is why clarithromycin treatment is found to be more effective against infections with M. abscessus subsp. massiliense than the other subspecies that contain the functional full-length gene [20]. One sample in our study that was identified as M. abscessus subsp. massiliense was found to possess a full-length erm(41) gene by both sequencing and real-time PCR. Shamira Shallom and colleagues (2013) have also identified M. abscessus subsp. massiliense isolates with full-length erm(41) in which they suggest is probably due to horizontal transfer [21].

Sequencing results of erm(41) and rrl were 96.0% (121/126) concordant with the phenotypic results, with 5 isolates of M. abscessus found to have phenotypic results discordant with the molecular results. Two isolates of M. abscessus subsp. abscessus showed inducible resistance phenotypically, but had the T28C mutation found with sequencing for an expected result to clarithromycin susceptibility. For these two isolates, both T and C alleles on position 28 of erm(41) were detected in the real-time PCR assay, showing that both alleles were present and that the real-time PCR method uses a probe based detection and hence was more sensitive than sequencing. Our sequencing method only detected the predominant C allele for this sample as in general, a sequencing method will more frequently utilize DNA template containing a predominant allele. However, real-time PCR can detect both most and less predominant alleles in low DNA concentrations. Another isolate showed an inducible resistant result phenotypically without a corresponding allele. This could not be resolved when both phenotypic and molecular assays were repeated and is likely due to another mutation outside the gene fragments used in this study. Efflux pump ability has been shown to be directly involved with clarithromycin resistance [22]. One isolate that showed a phenotypic susceptible result lacked correlation with genotypic mutations and also could not be resolved when repeated testing showed reproducibility on all assays. This is perhaps due to unknown mechanism that renders the isolate susceptible to clarithromycin. Extending the search to look for additional mutations did not show erm(41) C19T and hence evidence of susceptibility is lacking [23]. The fifth discordant result was resistant on day 3 of susceptibility testing indicating an acquired resistance to clarithromycin, but had no mutations found on positions 2058 of rrl with sequencing. This is suspected to be caused by a point mutation elsewhere on rrl that would affect the drug binding pocket. The discrepant strains that could be resolved by hsp65 or real-time PCR had their clarithromycin phenotypic susceptibility testing repeated with 3 of the final results staying reproducible to the initial results. There were no additional mutations in the rrl gene such as A2056G, A2057G, A2080C, G2068A, A2269G, G2281A, as the sequence matched wild type [10, 23].

A real-time assay was developed to assess resistance in M. abscessus isolates by targeting mutations that were found in sequencing. The assay was built upon the protocol in Shallom et al. (2015) for erm(41) and rrl with primer and tag modifications that allowed us to perform amplification under a single cycling condition; and included additional probes for 16S identification and full length erm(41) detection [12, 16, 17]. A probe for detecting the 16S gene of M. abscessus was used to confirm that samples were members of the M. abscessus and verified that erm(41) is present [16]. Discrimination of full-length and truncated erm(41) was done by having a probe and the reverse primer hybridize the region of the gene that is deleted. Amplification indicates a full-length erm(41) gene [17]. Two sets of probes were used to detect the mutant and wild type alleles for each position 28 of erm(41) and position 2058 of rrl [12]. With all of the included probes in our assay, identification and mutation detection can be determined for a sample after a single real-time PCR run. Compared to the 3–14 days needed for susceptibility testing, this modified real-time PCR method has significant impact in a clinical laboratory as it is much faster and helps in determining the best treatment. Samples were run in duplicates and were found to have similar CT and ΔRn values (Fig. 1) for each target, showing the high reproducibility of the assay and had CT values ranging from 16 to 24 for all reactions. Real-time results were compared to the sequencing data to examine adequate amplification in our assay. The real-time results confirmed the sequencing results in our samples. One sample showed a truncated erm(41) gene in sequencing, but detection of the full-length gene was observed with real-time PCR. Upon repeating hsp65 sequencing for this discrepancy, it was found to be mixed with both M. abscessus subsp. abscessus and M. abscessus subsp. massiliense. Hence, both test results were correct. Two samples detected both alleles of erm(41) by real-time PCR whereas sequencing only detected single C allele. The phenotypic results for these samples showed inducible resistance, indicating that the T allele was present and only real-time PCR was sensitive enough to detect it compared to sequencing. Hence, real-time PCR was superior to sequencing as it requires smaller DNA concentration and may detect both mutation profiles in a single test. Real-time PCR also has an advantage over the sequencing method done in our laboratory as it provides rapid test turnaround times, is less labour intensive with satisfactory test accuracy. The resulting output is a simple negative or positive for a real-time reaction i.e., looking for amplification vs interpreting sequencing chromatograms and hence less data screening. To summarize, even though 3 results were presumed discrepant between phenotypic and real-time PCR (97.6%; 123/126); 1 was found to be mixed by hsp65 sequencing and 2 samples detected both T28 and C28 erm(41) alleles by real-time PCR. This meant that in the presumed discrepant isolates, 100% concordance between sequencing and real-time was seen due to the real-time results. Hence, real-time PCR demonstrated slight advantage over traditional sequencing assay.

Conclusion

In conclusion, a real-time detection assay shortened turnaround times compared to phenotypic susceptibility testing and traditional sequencing. Probes for detecting A2058G and A2059G mutations on rrl were not appropriately evaluated in our study since incidence of rrl mutations were low. However, rrl was implemented in our assay for future testing to detect possible mutations that may be responsible for constitutive resistance. Multiplexing this assay could also result in conservation of reagents and hence decreased cost while running more samples on one plate/run. Whether by use of sequencing or by real-time PCR assay, there is advantage in detecting erm(41) variants to predict sensitivity of M. abscessus isolates to clarithromycin, hence impacting treatment outcomes.