Analytical Solutions of Fractional-Order Diffusion Equations by Natural Transform Decomposition Method.

In the present article, fractional-order diffusion equations are solved using the Natural transform decomposition method. The series form solutions are obtained for fractional-order diffusion equations using the proposed method. Some numerical examples are presented to understand the procedure of the Natural transform decomposition method. The Natural transform decomposition method has shown the least volume of calculations and a high rate of convergence compared to other analytical techniques, the proposed method can also be easily applied to other non-linear problems. Therefore, the Natural transform decomposition method is considered to be one of the best analytical technique, to solve fractional-order linear and non-linear partial deferential equations, particularly fractional-order diffusion equation.

1. Introduction

The idea of fractional calculus and entropy are attractive and more prevalent for investigating the dynamics of complex systems. In modern years, fractional calculus (FC) has been progressively applied in various fields of science. Natural development identified with viscoelasticity, models of porous electrodes, thermal stresses, electromagnetism, propagation of energy in dissipative systems, relaxation vibrations, and thermoelasticity are effectively portrayed by fractional differential equations (FDE’s) [1]. The knowledge of entropy was presented in the field of thermodynamics by Clausius (1862) and Boltzmann (1896) and was further applied by Shannon (1948) and Jaynes (1957) in information theory. Newly, more universal entropy measures have being suggested for applications in numerous varieties of complex systems, outstanding to the relaxation of the additive axiom [2]. The idea of entropy for calculating the dynamics of multi-particle systems with integer- and fractional-order behavior was suggested in [3]. The entropy production rate for the fractional diffusion procedure was considered in [4]. In [5], it has been shown that the total spectral entropy can be used as a measure of the data, comfortable in a fractional-order model of anomalous diffusion. Entropies based on fractional calculus [6]. Feng’s first integral method was applied successfully to obtain nonlinear space-time fractional modified Korteweg–de Vries equations [7], nonlinear partial differential equations, third-order dispersion [8,9] in entropy and convexity, fractional derivative advection-diffusion in two-dimensional semi-conductor systems, and the dynamics of a national soccer league [10]. The exact solution to differential equations (DEs) of fractional-order with mixed partial derivatives [11] and space-fractional diffusion equation and Tsallis relative entropy [12]. Diffusion forms contrast from regular diffusion in that the scattering of particles continues quicker (super diffusion) or slower (sub diffusion) than for the ordinary case.

Adolf Fick described Fick’s laws of diffusion in 1885. After that, Fick’s second law became known as the diffusion equation. Diffusion is the mesh movement of atoms or molecules from an area of higher concentration or great chemical potential to an area of inferior concentration or small chemical potential. In [13], the researchers generalized the classical diffusion and wave equations—different physical process such as classical diffusion, slow diffusion, the classical wave equation, and diffusion-wave hybrid. Many applications of diffusion equation, such as electrochemistry, phase transition, filtration, electromagnetism, acoustics, biochemistry, cosmology, and dynamics of biological groups [14]. Diffusion is determined by a gradient in chemical potential of the diffusing types. A gradient is the variation in the value of a number, e.g., concentration, pressure, or temperature with the variation in one or more variables being frequently distinct. A variation in temperature ended with a distance is called a temperature gradient, a variation in concentration over a distance is called a concentration gradient, and a variation in pressure ended with a distance is called a pressure gradient. Scientists have been attempting to comprehend and diminish the challenges of industrial procedures to accomplish higher effectiveness [15]. In engineering systems, there are different causes for entropy generation. In thermal systems, the primary source of entropy generation is mass transfer, heat transfer, viscous dissipation, coupling among heat, electrical conduction, and chemical reaction, as examined in a pioneering series of publications by Bejan and co-workers [16,17]. Researchers have used various techniques for the solution of diffusion equations such as the Collocation method (CM) [18], Diffusion and Tsallis entropy [19], Entropy production, Symmetric fractional diffusion [20], Finite differences method in space-fractional diffusion equations [21,22,23], Homotopy analysis method (HAM) [24], Homotopy perturbation transform method (HPTM) [25] and Modified homotopy perturbation method (MHPM) [26], Mehshless method (MM) [27], One-Dimensional alpha fractional diffusion [28], Radial basis function method (RBFM) [29], and the Variational iteration method (VIM) [30].

In the present work, we are applying the Natural transform decomposition method (NTDM) to solve the following types of diffusion equations.

Two-dimensional fractional-order diffusion equation of the form: subject to the initial condition

Three-dimensional fractional-order diffusion equation is given by subject to the initial condition

Natural transform and the Adomain decomposition method are two powerful methods that have been used to develop the Natural transform decomposition method. Many physical phenomena that are modeled by PDEs and FPDEs are solved using NTDM, such as the analytical solution of a coupled system of non-linear PDEs, are suggested in [31], the solution non-linear ODEs are successfully presented in [32], non-linear PDEs in [33], fractional unsteady flow of a polytropic gas model in [34], fractional telegraph equations in [35], and the fractional Fokker–Plank equation and Schrödinger equation in [36]. The accuracy of the proposed method is compared with the solutions obtained by HPM and MHPM. The comparisons have shown that the proposed method has a higher rate of convergence than HPM and MHPM. The rest of the article is structured as follows: In Section 2, we recall several basic properties and define Natural transform and fractional calculus. In Section 3, the idea of Natural transform decomposition method is discussed. In Section 4, we explain many problems to maintaining the accuracy and efficiency of the proposed method, and Section 5 is devoted to the conclusion.

The natural transform of where s and u are the transform variables.

The inverse natural transform of a function is defined by where s and u are the Natural transform variables, p is a real constant, and the integral is taken along

Natural Transform of n-th Derivative

If

If where

R–L fractional integral where

2. Preliminaries

In their study, Caputo et al. suggested a revised fractional derivative operator in order to overcome inconsistencies measured in the Riemann–Liouville derivative. The above mathematical statement described a Caputo fractional derivative operator of initial and boundary condition for fractional—as well as integer-order derivatives [39,40].

The Caputo operator of order γ for a fractional derivative is given by the following mathematical expression for

TheMittag–Leffler function

Here, we will study the convergence analysis, in the same manner as in [

Now we consider the fractional-order of diffusion equations of order three in the above assumptions which lets us denote then the fractional-order of diffusion equations becomes, in an operator form,

The NTDM reaches convergence if the following two hypotheses are satisfied:

3. Idea of Fractional Natural Transform Decomposition Method

In this section, we use the Natural transform decomposition method to find the general solution fractional-order diffusion equations. where is the Caputo Operator , L and N are respectively linear and non-linear functions, and q is the source function.

The initial condition is

Applying the Natural transform to Equation (1), we have and using the differentiation property of Natural transform, we get

Now ,

The NTDM solution is represented by the following infinite series: and the non-linear terms (if any) in the problem are defined by the infinite series of Adomian polynomials substituting Equations (5) and (6) into Equation (4), we get

Applying the linearity of the Natural transform,

Generally, we can write

Applying the inverse Natural transform, Equations (9) and (10)

4. Results

4.1. Example

Consider the two-dimensional fractional diffusion equation [26]: with the initial condition

Taking the Natural transform of Equation (12),

Applying inverse Natural transform, we get

Using the ADM procedure, we get for :

The subsequent terms are

The NTDM solution for Example 4.1 is: When , the NTDM solution is

This result is calculated to the exact solution in a closed form:

In Figure 1 NTDM solution of Example 4.1 of different value of , , and and are represented by Figure 1a and Figure 1b respectively at y, and . From the given graphs it can be observed that both exact and NTMD solutions are in strong agrement with each other.

Figure 1

The (a) NTDM of of Example 4.1, for different value of and (b) .

4.2. Example

Consider the two-dimensional fractional diffusion equation [26]: with the initial condition

Taking the Natural transform of Equation (18):

Applying inverse Natural transform, we get

Using ADM procedure, we get for :

The NTDM solution for Example 4.2 is When , then the NTDM solution is

This result is calculated to the exact solution in a closed form:

In Figure 2 NTDM solution of Example 4.2 of different value of , , and and are represented by Figure 2a and Figure 2b respectively at y, and . From the given graphs it can be observed that both exact and NTDM solutions are in strong agrement with each other.

Figure 2

The (a) NTDM solutions of of Example 4.2, for different values of and (b) .

4.3. Example

Consider the three-dimensional fractional diffusion equation [25]: with the initial condition

Taking the Natural transform of Equation (24),

Applying inverse Natural transform, we get

Using ADM procedure, we get for :

The subsequent terms are:

The NTDM solution for Example 4.3 is When , then the NTDM solution is

This result is calculated to the exact solution in a closed form:

Similarly, in Figure 3 the numerical values of the Example 4.3 show the accuracy and efficiency of the NTDM at different values of . In Figure 3a,b we consider fixed order for piecewise approximation values of in the domain . Figure 3c represents the graphs of NTDM solution at , and error Figure 3d at respectively of Example 4.3. It is cleared from the Figure 3a,b that NTDM solution are in good agreement with the exact solution of the problems. The small difference from the solutions graph of the problem, because the solution of the fractional-order problems creates a little deviation from the solution at integer order problem.

Figure 3

The (a) Exact and (b) NTDM solutions of of Example 4.3, at , (c) at and (d) Error plot at .

5. Conclusions

In this paper, the analytical solutions of fractional-order diffusion equations are determined, using NTDM. The NTDM solutions are obtained at fractional and integer orders for all problems. The results revealed the highest agreement with the exact solutions for the problems. The NTDM solutions for some numerical examples have shown the validity of the proposed method. It is also investigated that the fractional-order solutions are convergent to the exact solution for the problems as fractional-order approaches integer-order. The implementation of NTDM to illustrative examples have also confirmed that the fractional-order mathematical model can be the best representation of any experimental data compared to the integer-order model. Moreover, by taking different fractional orders, we can find a way to set a suitable mathematical model for any experimental data, and thus find reasonable consequences. Hence, it is concluded that NTDM is the best tool for the solution of FPDEs compared to ADM, VIM, and DTM discussed in literature. NTDM provides the highest rate of convergence to the exact solution for the problems. In the future, NTDM can be used to find the analytical solution of other non-linear FPDEs, which are frequently used in science and engineering. NTDM solutions for fractional-order problems will prove the best understanding of the real world problems represented by FPDEs.