Literature DB >> 33244816

Synergetic Effect of Dopamine and Alkoxysilanes in Sustainable Non-Isocyanate Polyurethane Adhesives.

Alvaro Gomez-Lopez1, Bruno Grignard2, Iñigo Calvo3, Christophe Detrembleur2, Haritz Sardon1.   

Abstract

The preparation of non-isocyanate polyurethanes (NIPUs) by polyaddition of (poly)cyclic carbonates to (poly)amines represents one of the most optimistic alternatives for replacing conventional polyurethanes prepared by the toxic isocyanate chemistry. However, the limited reactivity of conventional five membered cyclic carbonates even in the presence of catalysts restricts their industrial implementation. One way to mitigate this lack of reactivity is to combine with other chemistries to create hybrid-NIPUs with superior performance. In this article the combination of the adhesive promoter, dopamine, and the fast-curing promoter, an aminopropyl trimethoxysilane, is found to create a synergetic effect on the rheological and adhesive properties of NIPUs. After demonstrating the importance of adjusting soft/hard ratios to obtain lap-shear strength adhesion values up to 21 MPa on stainless steel, these values are retained when adding dopamine and silane compounds. Importantly, the adhesive properties of NIPU are preserved at high temperature (T > 200 °C) for optimal compositions. Finally, adhesion tests on various substrates (polyamide, high density polyethylene, poly(methyl methacrylate), oak wood, and aluminum) show best performances on polar substrates confirming the strong interactions of hydroxyl groups of NIPU and dopamine.
© 2020 Wiley-VCH GmbH.

Entities:  

Keywords:  adhesive properties; hybrid materials; lap-shear strength; non-isocyanate polyurethanes; shear adhesive failure temperature

Mesh:

Substances:

Year:  2020        PMID: 33244816     DOI: 10.1002/marc.202000538

Source DB:  PubMed          Journal:  Macromol Rapid Commun        ISSN: 1022-1336            Impact factor:   5.734


  2 in total

Review 1.  Poly(hydroxyurethane) Adhesives and Coatings: State-of-the-Art and Future Directions.

Authors:  Alvaro Gomez-Lopez; Satyannarayana Panchireddy; Bruno Grignard; Inigo Calvo; Christine Jerome; Christophe Detrembleur; Haritz Sardon
Journal:  ACS Sustain Chem Eng       Date:  2021-07-14       Impact factor: 9.224

2.  Enhanced and Reusable Poly(hydroxy urethane)-Based Low Temperature Hot-Melt Adhesives.

Authors:  Alvaro Gomez-Lopez; Naroa Ayensa; Bruno Grignard; Lourdes Irusta; Iñigo Calvo; Alejandro J Müller; Christophe Detrembleur; Haritz Sardon
Journal:  ACS Polym Au       Date:  2022-01-10
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.