An Optimized Protocol for In Vivo Analysis of Tumor Cell Division in a Sleeping Beauty-Mediated Mouse Glioma Model.

Malignant gliomas are the most common and aggressive primary brain tumor in adults, and high mitotic rates are associated with their malignancy. Gliomas were modeled in mice using the Sleeping Beauty system to encode genetic lesions recapitulating the human disease. The presented workflow allows the study of the proliferation of glioma cells in vivo, enabling the identification of different phases of the cell cycle, with the advantage that 5-ethynyl-2'-deoxyuridine staining does not involve denaturation steps and samples do not require histological processing. For complete details on the use and execution of this protocol, please refer to Núñez et al. (2019).

BEFORE YOU BEGIN

In vivo profiling of glioma cells’ cell cycle analysis is performed in a genetically engineered glioma model in mice utilizing the Sleeping Beauty (SB) transposon system (Wiesner et al., 2009, Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019, Garcia-Fabiani et al., 2020, Comba et al., 2020). To achieve this, plasmids encoding the different genetic alterations of interest, which will be stably inserted into the genome of mouse brain cells, need to be constructed. Those sequences encoding for genetic alterations, i.e. the transposons, are flanked by inverted repeats/directed repeats (IR/DR) that will be recognized by the SB transposase. This enzyme will integrate these transposons into the genome in a “cut and paste” manner (Calinescu et al., 2015). One advantage of this method is that the expression of these genes is coupled to the expression of fluorescent proteins, so that when gliomas develop, tumors can be recognized under a stereo-zoom microscope equipped with a fluorescent light (Figure 1A). These plasmids are co-injected along with a plasmid encoding for the SB transposase. This plasmid also contains the coding sequence for the Luciferase enzyme flanked by IR/DR, which will get inserted into the host genome as well (Figure 1A). This enables the study of plasmid uptake and tumor growth by bioluminescence. Refer to (Wiesner et al., 2009, Calinescu et al., 2015) for a detailed cloning protocol of SB-compatible plasmids (i.e. pKT-IRES-Katushka). Depending on the type of genetic alterations introduced, tumors will develop and animals will reach the humane endpoint within 2 to 6 months after the SB procedure (Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019, Comba et al., 2020) (Table 1). In vivo 5-ethynyl-2′-deoxyuridine (EdU) staining is performed when the tumor is large, i.e., when bioluminescence reaches a signal of 106 photons/s/cm2/sr, but before the tumor burden endpoint.

Figure 1

Sleeping Beauty Transposase Method to Model Glioma in Mice

(A) Generic plasmid maps used to generate gliomas in mice using the SB transposase method. GFP and Katushka are green and red fluorescent proteins, respectively. miR-30 sequences flank a shRNA encoding sequence designed to silence specific genes. The DNA transposons to be inserted are flanked by inverted repeats/direct repeats (IR/DR), which are recognized by the transposase.

(B) These sequences are then randomly integrated into the host genomic DNA sites, between bases T and A.

(C) Schematic of a 1 day-old mouse pup, showing the coordinates for plasmid injection into the lateral ventricle, at 1.5 mm rostral and 0.8 mm lateral to the lambda and 1.5 mm ventral.

(D) From left to right: bioluminescence scanning of a mouse pup 1 day after SB plasmid injection, when a large tumor has developed (106 photons/s/cm2/sr) and at tumor burden endpoint (107 photons/s/cm2/sr).

Table 1

Plasmid Combinations to Generate Sleeping Beauty-Based Gliomas in Mouse

Plasmid Combination	Addgene Cat. No.	Genetic Alteration	Name	Median Survival (DPI)	Reference
pT2/SB100x-Luc	20207	Luciferase expression	NP	83–95	(Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019, Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2/SB100x-Luc	20207	Luciferase expression	NPA	69–80	(Koschmann et al., 2016, Núñez et al., 2019, Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2/shAtrx-GFP4	124259	Atrx knock down
pT2/SB100x-Luc	20207	Luciferase expression	NPAI	163	(Núñez et al., 2019)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2/shAtrx-GFP4	124259	Atrx knock down
pKT-IDH1(R132H)-Katushka	124257	IDH1R132H overexpression
pT2/SB100x-Luc	20207	Luciferase expression	NPAH	162	(Garcia-Fabiani et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2/shAtrx-GFP4	124259	Atrx knock down
pKT-H3.3(G34R)-Katushka	-	H3.3G34R overexpression
pT2/SB100x-Luc	20207	Luciferase expression	NPAF	142	(Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2/shAtrx-GFP4	124259	Atrx knock down
pT2-shFYN-GFP4	-	Fyn knock down
pT2/SB100x-Luc	20207	Luciferase expression	NPF	131	(Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2/shP53	124261	p53 knock down
pT2-shFYN-GFP4	-	Fyn knock down
pT2/SB100x-Luc	20207	Luciferase expression	NPD	63–69	(Wiesner et al., 2009, Calinescu et al., 2015, Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2-shp53-PDGFβ-GFP4	-	p53 knock downPDGFβ overexpression
pT2/SB100x-Luc	20207	Luciferase expression	NPDF	108	(Comba et al., 2020)
pT/CAGGS-NRASV12	20205	NRASG12V overexpression
pT2-shp53-PDGFβ-GFP4	-	p53 knock downPDGFβ overexpression
pT2-shFYN-GFP4	-	Fyn knock down
pT2/SB100x-Luc	20207	Luciferase expression	NL	30	(Wiesner et al., 2009, Calinescu et al., 2015)
pT/CMVSV40-LgT	20204	SV40-LgT overexpression
pT/CAGGS-NRASV12	20205	NRASG12V overexpression

As described in the text, one-day-old mouse pups are injected with a plasmid combination to introduce different genetic alterations into the sub-ventricular zone brain cells. The specific genetic background generated in these cells will define the aggressiveness of the tumor developed and the median survival of tumor bearing mice, measured as days post injection (DPI).

Breeding Cage Setup

Timing: 20–30 days

Set up a breeding cage three to four weeks before the planned date for SB-injections.

Once pregnancy is confirmed, place the male mouse in a separate cage and monitor the female daily until pups are born.

At post-natal day 1, proceed with the SB protocol.

Plasmid Preparation for SB Procedure

μL of where N/P is the optimal ratio of nitrogen residues in the polyethyleneimine (PEI) to the phosphate residues in the DNA, 3 the number of nanomoles of anionic phosphate in 1 μg of nucleic acid, and 150 (mM) the concentration of nitrogen residues in the in vivo jetPEI solution. The optimal N/P factor for in vivo transfections is usually 7.

Timing: 1 h

Prepare the plasmid DNA mix with the in vivo transfection reagent (in vivo jetPEI), which will be injected into the lateral ventricle of 1 day-old mouse pups.

CRITICAL: The quality of the DNA to be injected is critical. DNA solutions must be sterile, endotoxin free, and highly concentrated for a small volume injection. Up to five plasmids can be injected per DNA/jetPEI mix.

DNA mix: add 2.8 μg of the plasmid encoding the SB transposase (pT2/SB100x-Luc) and 5.75 μg of each plasmid encoding for the transposons. Add 10 μL of 10% glucose and sterile water up to 20 μL.

In vivo jetPEI mix: the amount of transfection reagent depends on the amount of total DNA used and it can be calculated using the following formula:

Add 10 μL of 10% glucose and sterile water up to 20 μL.

Combine both mixes by pipetting. Vortex the mixture briefly, spin down and incubate it at 25°C for 20 min.

Prepare the stereotaxic frame to be used to perform the intraventricular injections

Place the 10 μL syringe with a 30G hypodermic needle into the micropump. Make sure that the injection system is working properly by withdrawing and releasing 10 μL of water.

Cool down the stereotactic neonatal stage to 2°C–8°C with a slurry of dry ice placed in alcohol.

Prepare a bucket with wet ice to induce anesthesia on the pups.

Key Resources Table

RESOURCE AVAILABILITY

Lead Contact

Further information and requests for resources and reagents should be directed to and will be fulfilled by the Lead Contact, Maria G. Castro, mariacas@med.umich.edu.

Materials Availability

Catalog numbers for the available plasmids used to generate the genetically engineered mouse glioma models using the Sleeping Beauty method are detailed in Table 1. Those plasmids that are not currently available in Addgene will be provided by the Lead Contact upon request with no restrictions.

Data and Code Availability

No datasets or code were generated during this study.

MATERIALS AND EQUIPMENT

Media and Reagent Preparation for the In Vivo Cell Cycle Analysis

Neurosphere (NS) media

Prepare 500 mL of NS media in advance and store it at 4 ˚C. At the time of tumor processing, prepare 50 mL of complete media by adding epidermal growth factor and fibroblast growth factor (EGF and FGF) to a final concentration of 20 ng/mL. Use 5 mL for tumor collection and keep the rest on ice for tissue dissociation.

BSA-EDTA buffer for magnetic sorting of CD45+ cells

Prepare the buffer and check that the pH is 7.2. Keep the buffer cold, at 4–8°C during the procedure.

Luciferin recipe for tumor volume monitoring

Make 1 mL aliquots and store at -20°C.

Prepare Red Blood Cell Lysis Buffer 1X (RBCLB) by diluting 1 mL of 10X RBCLB in 9 mL of Milli-Q water. Keep the buffer cold, at 4–8°C during the procedure.

Prepare reagents necessary for EdU and Click-iT reactions, following the manufacturer’s instructions:

EdU dilution to be injected: add 10 mL of PBS to Component A from the kit to obtain a 1 mg/mL dilution.

BSA-PBS buffer: 1% BSA in DPBS, pH 7.1–7.4.

EdU buffer additive 10X: add 2 mL of deionized water to component G from the kit and mix until the solution is clear.

Wash reagent 1X: add 50 mL of Component E from the kit to 450 mL of BSA-PBS buffer to prepare 500 mL of saponin-based washing buffer.

Prepare flow buffer: 2% FBS in DPBS.

CRITICAL: Check the manufacturer’s protocol and follow the storage instructions for each reagent listed above.

STEP-BY-STEP METHOD DETAILS

Injection of SB-Based Plasmids into the Lateral Ventricle of Neonatal Mice to Generate Glioma In Situ

Timing: 1–1.30 h

This workflow for inducing brain tumors in neonatal day 1 pups has been adopted from (Wiesner et al., 2009) and is extensively used in our group to develop low or high grade glioma models harboring different genotypes (Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019, Garcia-Fabiani et al., 2020, Comba et al., 2020). Brain tumors are induced by transposon-mediated integration of genetic alterations delivered in plasmid DNA into the host genome, without the need of viral vectors (Figures 1A and 1B) (Table 1). The tumors arise from the glial cells next to the ependymal layer of the lateral ventricle, where plasmids are injected (Koschmann et al., 2016, Núñez et al., 2019). Gliomas generated with the SB-based method recapitulate salient features of the human disease (Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019), thus representing a versatile and reliable model to study brain tumor’s biology and the efficacy of therapeutic agents.

Load the syringe with 10 μL of the DNA/jetPEI solution.

Induce anesthesia by hypothermia by placing the mouse pup wrapped in a gauze on wet ice for 2 min.

Place the pup on the previously cooled stereotaxic stage and immobilize the head using the ear bars. Wipe the head with ethanol 70%.

CRITICAL: Make sure that the head is placed firmly and parallel to the stereotaxic stage.

Adjust the microdrive screws to lower the needle close to the head and place it in the midline intersection of the parietal and occipital bones (lambda).

Adjust the stereotaxic coordinates to 0.8 mm lateral and 1.5 mm rostral to the lambda (Figure 1C).

Lower the needle until it touches the skin, record the dorso-ventral coordinates.

Lower the needle 1.5 mm to pierce the skin and skull. At this position, the tip of the needle should be inside the lateral ventricle (Figure 1C).

Using an automatic injector, inject 0.75 μl of the DNA/jetPEI solution at a rate of 0.5 μl/min.

After the DNA/jetPEI solution has been injected, keep the pup in the frame for 1 min.

CRITICAL: To prevent burns, make sure that the temperature of the frame does not go below 2 ˚C.

Anesthetize the next pup by repeating step 2.

Slowly and gently lift the needle to pull it out from the brain.

Place the pup under a heating lamp until normal breathing resumes, monitoring that it recovers its mobility and its rosy color. Apply a gentle lung massage if necessary to aid the breathing recovery.

CRITICAL: Limit the time between mouse anesthesia and the post-injection warm up. This will ensure the pup will survive better after the SB plasmid injection. Mouse survival is usually absolute when this procedure lasts less than 10 min. If the procedure lasts more than 10 min, mouse survival could be reduced by 10%.

Once the pup is breathing and moving normally, place it back in the cage with the mother and monitor the mother’s response to the pups. Start the injection on the next pup, already anesthetized in step 10.

CRITICAL: If there are more pups in the breeding cage, mark the tail of the injected animal before putting it back in the cage to avoid injecting the same pup twice.

After all the injections are done, monitor the cage for another 30 min to ensure that the mother is nurturing the pups.

CRITICAL: Usually, mothers instantly accept the pups after the procedure. However, if it is observed that the mom is not nurturing the pups, a surrogate mother can be added to the cage.

Place cage back to the animal room and monitor tumor growth.

CRITICAL: The pT2/SB100x-Luc not only encodes for the SB transposase, but also for the Luciferase enzyme, which gets inserted into the host genome. Thus, plasmid uptake by brain cells can be monitored 24 h after the intraventricular injection using an IVIS bioluminescence imager (Figure 1D, first panel) (Calinescu et al., 2015, Koschmann et al., 2016, Núñez et al., 2019, Garcia-Fabiani et al., 2020). Monitoring tumor growth by bioluminescence as the animals grow might be challenging because of the increased optical density of the fur, skin and skull. However, when the tumor reaches a threshold size, 1–2 mm3 for darkly pigmented C57BL6 mice, tumor detection is possible (Figure 1D, second and third panels).

Tumor Monitoring by Bioluminescence Imaging and EdU Administration

Timing: 1–4 h

Depending on the genetic alterations introduced into the mouse brain cells, animals will display tumor burden symptoms in two or more months after the SB procedure (Table 1). These symptoms consist of weight loss, ruffled fur, hunched posture, impaired mobility or other abnormalities in movement. Usually, tumor progression can be monitored by bioluminescence two or three weeks before signs of tumor burden become evident. Endpoint tumors commonly display a bioluminescence of 107–108 photons/s/cm2/sr (Figure 1D). EdU injections should be performed before mice show signs of tumor burden; when tumor is easily detectable by bioluminescence but is not yet necrotic or hemorrhagic. For this procedure, EdU is injected when animals display 106 photons/s/cm2/sr IVIS signal (Figure 1D).

Measure tumor volume using an IVIS bioluminescence imager.

Anesthetize the animals in the anesthesia chamber with oxygen/isoflurane flow (1.5–2.5% isoflurane).

Inject 100 μl of Luciferin solution (30 mg/mL) intraperitoneally and start a timer for 5 min.

Place the animal back to the chamber and wait for 3–4 min.

Start oxygen/isoflurane flow in the bioluminescence chamber and place the animal in the slot equipped with the glass nose cones.

Place the animal in the bioluminescence chamber and when the timer goes off acquire a series of 6 images, at 2 min intervals with an automatic exposure time, median binning, and an open aperture of f = 1.

Select the area of interest (i.e. the head) with an oval figure and measure the luminescence intensity using the calibrated unit photons/s/cm2/sr.

If the animal has a 106 photons/s/cm2/sr signal, proceed to EdU administration.

EdU injection

Inject 10 mg/kg of the EdU dilution intraperitoneally. For instance, for mice weighting 30 g, inject 300 μl of the EdU dilution.

Wait 3 h and proceed with the next steps.

Tumor Dissection and Depletion of CD45 Cells

Timing: 2.5 h

CRITICAL: For the next steps, work quickly, always keep the cells cold, and use pre-cooled solutions. This will prevent cell death, capping of antibodies on the cell surface and non-specific cell labeling.

3 h after EdU injection, euthanize the animal with an overdose of isoflurane. Examine animal responsiveness by toe and tail pinch.

Decapitate the animal’s head and gently dissect the brain from the skull.

Place the brain into a Petri-dish on wet ice. Since the SB plasmids encoding for the oncogenes also encode for fluorescent proteins (Figure 1A), tumor tissue can be visualized and accurately dissected from the brain using a stereo-zoom microscope equipped with a fluorescent light illumination system (Figure 2A).

Figure 2

Images Depicting Critical Steps of Tumor Dissection and CD45+ Cell Depletion Procedure

(A) Images showing a mouse SB-generated glioma under a stereo-zoom microscope equipped with a fluorescent light illumination system. In this example, the tumor was generated with SB plasmids encoding for genes coupled to GFP (middle picture) and Katushka (right picture) expression as reporter genes. Scale bars, 0.5 cm.

(B) Image showing a 50 mL conical tube, with a cell strainer on the top and a pestle, used to disintegrate the tumor tissue.

(C) Image illustrating MACS CD45-depletion column set up.

Dissect the tumor from the brain using scalpels.

Place the tumor pieces into a 50 mL conical tube with 5 mL of NS complete media.

Using a cell strainer on a 50 mL conical tube and the sterile pestle of a 1 mL syringe, disaggregate the tumor tissue. Rinse the strainer with 10 mL of NS media through the strainer. Continue homogenizing the tissue through the strainer. Rinse two more times with 10 mL of NS media. Keep the single cell suspension on ice (Figure 2B).

Centrifuge the cells at 300 xg for 5 min at 25°C.

Remove supernatant and add 1 mL of 1X cold RBCLB. Incubate 1 min on ice. To stop cell lysis, add 9 mL of DPBS.

Centrifuge the cells at 300 xg for 5 min at 25°C.

Discard supernatant and resuspend the pellet in 90 μl of cold BSA-EDTA buffer.

Count the cells using trypan blue and a hemocytometer.

Add 10 μl of CD45 MicroBeads per 107 total cells. Mix well by pipetting.

CRITICAL: When working with 107 or less cells, follow the volume of reagents listed above. When working with higher amount of cells, scale up all reagent volumes accordingly.

Incubate beads-cell suspension for 15 min at 4°C.

CRITICAL: Do not incubate on ice, as it might require longer incubation time.

Add 1 mL of BSA-EDTA buffer to wash the cells and centrifuge at 300 xg for 10 min at 4°C.

Discard the supernatant and resuspend up to 108 cells in 500 μl of cold BSA-EDTA buffer.

Place the LS column on a suitable MACS separator.

CRITICAL: LS columns allow the retention of up to 1×108 labeled cells and processing samples with up to 2×109 cells. There are different column size options available and we recommend evaluating which is the one that best suits the tissue to be used and the approximate amount of cells to be analyzed.

Precondition the LS column by rinsing it with 3 mL of BSA-EDTA buffer and letting all the solution to go through it.

Place a 15 mL collection tube below the column and add the pre-separation filter on top of it.

Pre-separation filters on the top of the columns are important to prevent cell clumping and column clogging.

Apply the cell suspension onto the filter and collect the CD45- cells that pass through the column (Figure 2C).

Once the suspension stops dripping, wash the column once with 3 mL of cold BSA-EDTA buffer, collecting the eluate in the same tube (first eluate).

To further deplete CD45+ cells from this suspension, pass this first eluate through a second pre-conditioned column placed in the magnetic field, with a pre-separator filter on the top. Collect the eluted cells.

When the entire cell suspension has gone through the column, apply 3 mL of cold BSA-EDTA buffer to rinse it, collecting the eluted cells (second eluate). These cells are mostly tumor cells, depleted of immune cells.

Pellet the CD45-depleted tumor cells by centrifuging the second eluate at 300 xg for 10 min at 4°C.

This method allows the separation of tumor cells from immune cells with a substantial amount of viable cells. The number of CD45+ cells in the tumor enriched cell fraction is negligible (Garcia-Fabiani et al., 2020).

Flow Staining: Click-iT Reaction and Phospho-Ser10-Histone 3 Intracellular Staining

Timing: 2.5 h

EdU is a thymidine analog that is incorporated into DNA during active DNA synthesis. The detection of EdU is based on a click reaction between a picolyl azide, which is coupled to a fluorescent dye, and an alkyne (EdU nucleoside). In this protocol, we used a Pacific Blue-coupled azide. Moreover, the phosphorylation of the serine residue 10 in the histone 3 tail (p-Ser10-H3) is a critical event in mitosis. Histone-3-Serine-10 phosphorylation is important for chromosome condensation, and starts at late G2 phase, peaks at metaphase and decreases from late anaphase to early telophase (Kim et al., 2017). To study cell cycle characteristics, we performed EdU and p-Ser10-H3 intracellular staining on tumor cells.

It is highly recommended to use single stained compensation controls and single stained samples as controls, i.e., “EdU only” and “p-Ser10-H3 only” samples. Also, keep unstained cells for compensation set up.

Add 3 mL of 1% BSA-PBS buffer to wash the cells and centrifuge at 300 xg for 5 min at 4°C. Remove supernatant.

For 106 cells, add 100 μL of Click-iT fixative (Component D) and mix well by pipetting.

Incubate the samples in fixative for 15 min at 25°C, protected from light.

Add 3 mL of 1% BSA-PBS buffer to wash the cells and centrifuge at 300 xg for 5 min at 4°C. Remove supernatant.

Resuspend the pellets in 100 μL of 1X Click-iT permeabilization and wash reagent. Mix well.

Incubate the samples 15 min at 25°C.

Add 1 μL of p-Ser10-H3-PE antibody resuspended in 100 μL 1X Click-iT permeabilization and wash reagent to each sample.

Incubate the samples for 30 min at 25°C, protected from light.

Add 3 mL of 1% BSA-PBS buffer to wash the cells and centrifuge at 300 xg for 5 min at 4°C. Remove supernatant.

Add 100 μL of 1X Click-iT permeabilization and wash reagent. Mix well.

Prepare Click-iT EdU buffer additive 1X: dilute Click-iT EdU buffer additive 10X 1:10 in deionized water. For each reaction 50 μL of Click-iT EdU buffer additive 1X are necessary.

For each reaction, prepare the following cocktail:

Use the Click-iT cocktail within 15 min of preparation.

Add 500 μL of the Click-iT cocktail to each sample with the fixed cells and mix well. At this point, the total volume is 600 μL.

Incubate the reaction for 30 min at 25°C, protected from light.

Add 3 mL of 1X Click-iT permeabilization and wash reagent to wash the cells and centrifuge at 300 xg for 5 min at 4°C. Remove supernatant.

Resuspend cells in flow buffer and analyze.

Pause Point: Once the cells are fixed, data acquisition by flow cytometry can be performed the next day. Store stained cells at 4°C protected from light.

Data Acquisition

Timing: 1–2 h

Use the single stained samples and the unstained sample to perform laser compensation. Once the laser set up is done, proceed to run the samples.

The gating strategy is to perform doublet discrimination first by gating in a SSC-W vs SSC-H plot and then FSC-W vs FSC-H plot (Figure 3A), before EdU and p-Ser10-H3 positive cell identification.

Figure 3

Flow Cytometry Gating Strategy Used to Identify EdU+ and p-Ser10-H3+ Glioma Cells

(A) Total cells are gated to exclude cellular debris (top left plot). Then, doublet discrimination gating is performed to filter out cellular aggregates (top middle and right plots). Lower panel: Left histogram: glioma cells positive for EdU (black=unstained control, blue=EdU (Pacific Blue staining)). Right histogram: glioma cells positive for p-Ser10-H3 expression (black=unstained control, red=p-Ser10-H3 (PE staining)).

(B) Representative results for p-Ser10-H3 and EdU staining of tumor cells isolated from SB gliomas. Tumors were generated by the introduction of the following genetic alterations: NRASG12V overexpression, p53 and Atrx silencing for NPA; or NRASG12V overexpression, p53 and Atrx silencing, and IDH1R132H overexpression for NPAI (Table 1). Results are shown as the % of positive cells (left table) or the median fluorescent intensity (MFI) (right table) ± SD, for each staining. NPAI tumors are less aggressive than NPA tumors and cells show different cell cycle characteristics.

To identify EdU positive cells, plot single cells as a histogram to analyze the distribution of the dye (i.e., Pacific Blue) (Figure 3A, lower left panel). To identify p-Ser10-H3 positive cells, cells were plotted on a separate histogram and PE staining was measured (Figure 3A, lower right panel).

Run the single stained controls and set the gates.

Run samples, collecting at least 30,000 events.

Analyze data using FlowJo software.

EXPECTED OUTCOMES

In general, proliferating cells going through S phase of the cell cycle incorporate EdU while DNA is being synthetized. After the Click-iT reaction, cells in the S phase will be positive for the fluorochrome bound to the azide and the cell population of interest can be easily detected by flow cytometry. After EdU incorporation and Click-iT reaction, two peaks in the stain’s histogram can be identified: one peak with low or no staining, i.e. cells not undergoing S phase; and a second peak with positive staining levels, i.e. cells undergoing S phase (Figure 3A, lower left panel).

To identify cells going through mitosis, p-Ser10-H3 intracellular staining was performed. The analysis can be done in the same way as the EdU analysis. Cells going through mitosis will be stained with anti-p-Ser10-H3 antibody (Prigent and Dimitrov, 2003, Li et al., 2005, Núñez et al., 2019). These cells can be easily detected as a single positive peak in the histogram, whereas cells that are unstained for the marker constitute the negative population of cells, i.e. not undergoing mitosis (Figure 3A, lower right panel).

The genetic background of the glioma induced by the SB method will define the aggressiveness of the tumor and will have an impact on the cell cycle characteristics and on the proportion of tumor cells undergoing S and M phases (Figure 3B).

LIMITATIONS

Tumor bearing mice displaying an IVIS signal of 108–109 photons/s/cm2/sr will be negative for EdU and p-Ser10-H3 staining. This IVIS signal usually corresponds to maximum tumor burden. At this stage glioma cells are not proliferative and tumor tissue starts to become necrotic. Cells should only be harvested during an exponential growth stage to accurately characterize cell cycle profiles.

Animals bearing tumors that display IVIS signal of 104–105 photons/s/cm2/sr are not suitable for EdU and p-Ser10-H3 staining. At this IVIS signal the tumor is still very small. In this case, not enough tumor cells can be acquired from a single animal for flow cytometry analysis.

In order to draw accurate conclusions about the tumor cell cycle profile, tumor cells could be stained with additional cell surface markers such as CD133 or CD44 (Brown et al., 2017). In the case of SB-derived gliomas, tumor cells could also be identified by staining for the fluorescent reporter proteins associated to the expression of the oncogenes introduced.

CD45+ cell depletion method reliably depletes immune cells from the tumor homogenate (Garcia-Fabiani et al., 2020). In case these reagents cannot be acquired, immune cells could be discriminated from the glioma cells during flow cytometry by staining the tumor cell suspension with an anti-CD45 antibody coupled to a fluorochrome. Right after tumor dissociation, wash the samples with flow buffer and stain 1x106 cells in 200 μL of flow buffer with 1 μL of anti-CD45 antibody fluorochrome-conjugated. Incubate for 30 min on ice, protected from light. Wash twice with flow buffer and continue with cell fixation, p-Ser10-H3 intracellular staining and Click-iT reaction. EdU and p-Ser10-H3 positive cells should then be identified within the CD45-negative population.

We were not able to perform this method on orthotropic implantable brain tumor model. We believe that this could be related to different properties of SB-based tumors versus implanted tumors regarding the penetration of the EdU compound.

TROUBLESHOOTING

Problem

Low or no EdU labeling.

Potential Solution

The time elapsed between EdU administration and animal euthanasia should be determined empirically and it could vary amongst the type of tumor being harvested and its anatomic location.

Non-specific/high fluorescent staining of p-Ser10-H3.

To minimize non-specific p-Ser10-H3 staining, blocking CD16/CD32 antibody could be utilized. This reagent contains immunoglobulins that will bind to the Fc-receptor, thereby blocking the non-specific binding of p-Ser10H3 to other receptors on the tumor cell. Also, adding and additional washing step after the incubation of the sample with the antibody might be added to further eliminate unspecific binding.

No p-Ser10-H3 staining.

The concentration of p-Ser10-H3 antibody should be determined empirically. Antibody titration could be performed in fixed and permeabilized cells.

Intracellular proteins may be lost if excessive cell permeabilization occurred before sufficient cross-linking is attained. This could be the case if methanol is used as a fixative instead of formaldehyde.

Cellular clumping during flow cytometry

Vortex the sample gently at low speed before running the sample.

Clumps can also be removed by filtering the sample through a 70 μm nylon mesh before running it in the flow cytometer.

High side scatter signal

This could be due to lysed or broken cells. Ensure that samples are fresh and prepared according to the workflow detailed above. Do not vortex cells at a high speed before data acquisition.

REAGENT or RESOURCE	SOURCE	IDENTIFIER
Antibodies
Phospho-Histone H3 (Ser10) - PE conjugated (Clone 11D8)	Biolegend	Catalog # 650807
Experimental Models: Organisms/Strains
Mouse (C57BL/6J)	Jackson Lab	# 000664
Chemicals, Peptides, and Recombinant Proteins
DMEM/F12	Thermo Fisher Scientific - Gibco	Catalog # 11330032
DPBS, no calcium, no magnesium	Thermo Fisher Scientific - Gibco	Catalog # 14190144
BSA	Millipore Sigma	Catalog # A2153-100G
N2 Supplement (100 X)	Thermo Fisher Scientific - Gibco	Catalog # 17502048
B27 Supplement (50 X)	Thermo Fisher Scientific - Gibco	Catalog # 17504044
Anti-Anti (100X)	Corning	Catalog # 30-004-CI
Normocin	InvivoGen	Catalog # ant-nr-1
MACS BSA Stock Solution	Miltenyi Biotec	Catalog # 130-091-376
autoMACS Rinsing Solution	Miltenyi Biotec	Catalog # 130-091-222
mouse CD45 MicroBeads	Miltenyi Biotec	Catalog # 130-052-301
EGF	PeproTech	Catalog # AF-100-15
FGF	PeproTech	Catalog # 100-18B
In vivo jetPEI (includes 10% glucose solution)	Polyplus	Catalog # 201-10G
D-Luciferin Potassium Salt	Goldbio	Catalog # LUCK -3G
Red Blood Cell (RBC) lysis buffer (10X)	Biolegend	Catalog # 420301
Fetal Bovine Serum (FBS) USDA Pure Premium	Peak Serum	Catalog # PS-FB3
Critical Commercial Assays
Click-iT™ Plus EdU Pacific Blue™ Flow Cytometry Assay Kit	Thermo Fisher Scientific - Invitrogen	Catalog # C10636
Recombinant DNA
pT2/SB100x-Luc	Addgene	Catalog # 20207
pT/CAGGS-NRASV12	Addgene	Catalog # 20205
pT2/shP53	Addgene	Catalog # 124261
pKT-IDH1(R132H)-Katushka	Addgene	Catalog # 124257
Software and Algorithms
FlowJo_V10	Becton Dickinson	N/A
Other
LS Columns	Miltenyi Biotec	Catalog # 130-042-401
QuadroMACS Separator	Miltenyi Biotec	Catalog # 130-090-976
MACS MultiStand	Miltenyi Biotec	Catalog # 130-042-303
Pre-Separation Filters	Miltenyi Biotec	Catalog # 130-041-407
10 μl syringe	Hamilton	700 Series
30 G hypodermic needle	Hamilton	Catalog # 7803-07. Specifications: 30GA RN 6PK 1.25" 15°
Cell strainers	Alkali Scientific Incorporated	Catalog # MT4070
BD FACSAria™ III Flowcytometer	Becton, Dickinson & Company	N/A
Just for Mouse Stereotaxic Instrument	Stoelting	Catalog # 51730
Quintessential Stereotaxic Injector (QSI)	Stoelting	Catalog # 53311
IVIS Spectrum In Vivo Imaging System	Perkin Elmer	Catalog # 124262
Allegra 6R Refrigerated Benchtop Centrifuge	Beckman Coulter	N/A
Small Animal Heat Lamp	Morganville Scientific	Catalog # HL0100
Stereomicroscope System SZX7 (equipped with fluorescent lamp)	Olympus	N/A
50 mL Olympus Polystyrene Tubes	Genesee Scientific Corporation	Catalog # 21-108
15 mL Olympus Polystyrene Tubes	Genesee Scientific Corporation	Catalog # 21-103
CellPro™ Flow Cytometry Tubes without cap, sterile, 12x75mm	Alkali Scientific Incorporated	Catalog # CT6414
Covidien Monoject 1 mL tuberculin Syringes	Fisher Scientific	Catalog # 22-257-154
Friedman Bone Rongeurs	Stoelting	Catalog # 52160P
Micro Dissecting Scissors, 4.25 inch, Straight, 24mm, Sharp	Stoelting	Catalog # 52132-22P
Brown-Adson Forceps, 4.7in, Side Teeth	Stoelting	Catalog # 52104-31P
BD Precision Glide Hypodermic Needles 26G	Fisher Scientific	Catalog # 14-826-15

Reagent	Final Concentration	Amount
DMEM/F12	-	480 mL
Anti-Anti 100 X	1 X (1 IU/mL Penicillin, 100 μg/mL Streptomycin, 0.25 μg/mL Amphotericin B)	5 mL
N2 supplement 100 X	1 X	5 mL
B27 supplement 50 X	1 X	10 mL
Normocin	100 μg/mL	1 mL

Reagent	Final Concentration	Amount
MACS 10% BSA Stock Solution	0.5% BSA	1 mL
autoMACS Rising Solution	2 mM Ethylenediaminetetraacetic acid (EDTA)	19 mL

Reagent	Final Concentration	Amount
Luciferin	30 mg/mL	1 grs
DPBS	-	33 mL

Component	Volume for 1 Reaction (μL)
PBS, DPBS or TBS	438
Copper protectant (Component F)	10
Fluorescent dye picolyl azide	2.5
Click-iT EdU buffer additive 1X	50
TOTAL	500.5