Accurate detection of lameness in dairy cattle with computer vision: A new and individualized detection strategy based on the analysis of the supporting phase.

Lameness has a considerable influence on the welfare and health of dairy cows. Many attempts have been made to develop automatic lameness detection systems using computer vision technology. However, these detection methods are easily affected by the characteristics of individual cows, resulting in inaccurate detection of lameness. Therefore, this study explores an individualized lameness detection method for dairy cattle based on the supporting phase using computer vision. This approach is applied to eliminate the influence of the characteristics of individual cows and to detect lame cows and lame hooves. In this paper, the correlation coefficient between lameness and the supporting phase is calculated, a lameness detection algorithm based on the supporting phase is proposed, and the accuracy of the algorithm is verified. Additionally, the reliability of this method using computer vision technology is verified based on deep learning. One hundred naturally walking cows are selected from video data for analysis. The results show that the correlation between lameness and the supporting phase was 0.864; 96% of cows were correctly classified, and 93% of lame hooves were correctly detected using the supporting phase-based lameness detection algorithm. The mean average precision is 87.0%, and the number of frames per second is 83.3 when the Receptive Field Block Net Single Shot Detector deep learning network was used to detect the locations of cow hooves in the video. The results show that the supporting phase-based lameness detection method proposed in this paper can be used for the detection and classification of cow lameness and the detection of lame hooves with high accuracy. This approach eliminates the influence of individual cow characteristics and could be integrated into an automatic detection system and widely applied for the detection of cow lameness.