Literature DB >> 32946956

The effects of spray drying, HPMCAS grade, and compression speed on the compaction properties of itraconazole-HPMCAS spray dried dispersions.

Moshe Honick1, Sharmila Das1, Stephen W Hoag1, Francis X Muller2, Alaadin Alayoubi3, Xin Feng3, Ahmed Zidan3, Muhammad Ashraf3, James E Polli4.   

Abstract

Spray dried dispersions (SDDs) have the potential to dramatically improve the oral bioavailability of drugs with poor water solubility. However, SDDs tend to have material attributes, such as small particle size, low bulk density, and poor flowability, which are undesirable for downstream processing such as tableting. The objective was to perform a comprehensive compaction characterization of both physical mixtures and SDDs consisting of itraconazole (ITZ) and hypromellose acetate succinate (HPMCAS) to elucidate process and material influences on compressibility and compactibility. We fabricated SDDs with 20% ITZ as a model BCS Class 2 drug and 80% HPMCAS as a polymer carrier. Results indicate that SDDs, as well physical mixtures of ITZ and HPMCAS, were easily deformable with similar compressibility profiles across all compression speeds. Analysis of Heckel plots revealed that yield pressures were fairly low for both physical mixtures and SDDs (43.97-59.75 MPa), indicative of ductile materials. SDDs had a much greater propensity to laminate, especially at higher compression speeds, compared to physical mixtures. This difference is likely due to the higher elastic recovery of SDDs. However, for intact tablets, the mechanical strength of compacts from SDDs tended to be higher than those produced from physical mixtures, likely due to the much smaller particle size of the SDDs. Importantly, examination of the compacts with differential scanning calorimetry did not detect any drug crystallization as a result of compaction. In conclusion, while spray drying did not significantly alter the compressibility of binary mixtures ITZ and HPMCAS, it dramatically impacted compactibility and tabletability, increasing elastic recovery, and making the mixtures more prone to lamination. However, at low compression speeds, SDDs produced tablets with higher tensile strength than physical mixtures.
Copyright © 2020 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Compaction; Hypromellose acetate succinate; Itraconazole; Lamination; Spray dried dispersion

Mesh:

Substances:

Year:  2020        PMID: 32946956     DOI: 10.1016/j.ejps.2020.105556

Source DB:  PubMed          Journal:  Eur J Pharm Sci        ISSN: 0928-0987            Impact factor:   4.384


  1 in total

1.  Densifying Co-Precipitated Amorphous Dispersions to Achieve Improved Bulk Powder Properties.

Authors:  Derek S Frank; Ashish Punia; Mairead Fahy; Chad Dalton; Jasmine Rowe; Luke Schenck
Journal:  Pharm Res       Date:  2022-10-21       Impact factor: 4.580

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.