DyxMnFe2-xO4 nanoparticles decorated over mesoporous silica for environmental remediation applications.

An efficient, environment-friendly and economical catalyst to control contaminants of environment is an enduring interest in recent years. In this study, a new composite, DyxMnFe2-xO4nanoparticles decorated over mesoporous silica was synthesized and utilized for removal of organic pollutant. Highly crystalline nature of DyxMnFe2-xO4 nanoparticles and amorphous nature of material was confirmed by XRD (X-ray diffraction) technique. Infrared spectra of fabricated material before and after adsorption of dye molecules evidenced the successful adsorption of dye molecules by fabricated adsorbent. From field emission scanning electron microscopic (FESEM) images of Dy3+ substituted MnFe2O4 composite with mesoporous silica, it was clearly observed that ferrite particles of size 20-30 nm were decorated on the surface of mesoporous silica particles and distributed well over spherical silica balls homogeneously. Its magnificent mesoporous nature was revealed from BET (nitrogen adsorption-desorption measurements) analysis. Surface area, pore volume and average pore size was found 387.95 m2/g, 0.390 cm3/g and 4.02 nm respectively. Tri-modal pore size distribution showed its effective utilization in adsorption. The abundant (SiOH) hydroxyl groups of mesoporous silica, the broad diffraction hump of silica depicted its superior loading capacity of target molecular specie inside its porous network. From band gap analysis, a red shift of 2.43 eV exhibited semiconductor photocatalysis of DyxMnFe2-xO4 nanoparticles. Degradation efficiency of bare MnFe2O4, DyxMnFe2-xO4 and mesoporous silica-based composite was tested using crystal violet dye. Its explored adsorption-photocatalysis synergy, degradation mechanism, kinetic investigation, easily recovery and remarkable recycling ability suggested that the new fabricated composite is best for environmental remediation.