Enhancement of skin permeability with thermal ablation techniques: concept to commercial products.

Traditionally, the skin is considered as a protective barrier which acts as a highly impermeable region of the human body. But in recent times, it is recognized as a specialized organ that aids in the delivery of a wide range of drug molecules into the skin (intradermal drug delivery) and across the skin into systemic circulation (transdermal drug delivery, TDD). The bioavailability of a drug administered transdermally can be improved by several penetration enhancement techniques, which are broadly classified into chemical and physical techniques. Application of mentioned techniques together with efforts of various scientific and innovative companies had made TDD a multibillion dollar market and an average of 2.6 new transdermal drugs are being approved each year. Out of various techniques, the thermal ablation techniques involving chemicals, heating elements, lasers, and radiofrequency (RF) are proved to be more effective in terms of delivering the drug across the skin by disrupting the stratum corneum (SC). The reason behind it is that the thermal ablation technique resulted in improved bioavailability, quick treatment and fast recovery of the SC, and more importantly it does not cause any damage to underlying dermis layer. This review article mainly discussed about various thermal ablation techniques with commercial products and patents in each classes, and their safety aspects. This review also briefly presented anatomy of the skin, penetration pathways across the skin, and different generations of TDD. Graphical abstract.

Introduction

Undoubtedly, the skin is the largest organ in our body and it roughly accounts for 15% of the total body mass. It has varying surface area of 1.5 to 2.0 m2 based on the anatomical site and gender [1, 2]. The skin is regarded as a critical protective layer and plays an important homeostatic role [3]. It is a multi-layered organ, basically having three layers: epidermis, dermis, and subcutaneous layers. All these layers are different from each other with regard to morphology and function. The skin continues to be the centre of huge research interest due to its huge accessible large surface area [4, 5]. However, SC, the outer layer of skin, is a formidable barrier which poses a biggest challenge for many drugs to be delivered through the skin. Therefore, to be therapeutically successful, this barrier nature of the skin must be altered in such a way that the drug can be administered at rate sufficient enough to achieve desired plasma concentration [6].

Delivery of drugs into systemic circulation via skin is termed as TDD. TDD has many potential advantages compared with (a) oral drug delivery such as avoidance of first-pass metabolism and harsh environment of the stomach, minimization of inter- and intra-patient variation, higher patient acceptance and comfort level, promotion of controlled and reproducible drug delivery, delivery of drugs with short biological half-life and narrow therapeutic index, possibility of self-administration, and ease of termination in case of side effects [7-10], and compared with (b) parenteral route such as needleless administration of drug (i.e. no pain to the patient), and reduction of possible infections and compliance issues [11]. Despite all the above benefits, TDD was explored much after the approval of first transdermal patch, called Transderm Scope® (Alza Corporation, USA) by the Food and Drug Administration (FDA) in 1979. Prior to this, TDD was restricted to simple drug delivery vehicles such as ointments and gels with very few active ingredients (e.g. nitroglycerine and estradiol). Later in 1981, nitroglycerine patches for prevention of angina were approved by the FDA for marketing. However, the transdermal route of drug delivery gained huge acceptability among patients only after nicotine patches for smoking cessation were introduced in 1991.

However, TDD is not flawless for drug transport as it has many challenges, including the barrier property of SC, and variability in penetration among individuals and among different skin locations of an individual [12]. In addition, lag in onset of action and lack of pharmacokinetic control may also diminish the reliability of TDD [13]. As a result, only the drug molecules having low molecular weight (MW < 500 Da), a balanced lipophilicity (log P (octanol/water), ideally 2 to 3) and hydrophilicity (aqueous solubility > 100 μg/ml), and small-dose drugs with < 10 mg/day requirement and melting point < 200 °C are suitable candidates for transdermal delivery [14]. Therefore, only very few lipophilic and small drug molecules are able to cross the skin passively. On the other hand, hydrophilic drugs and macromolecules such as protein, peptides, and vaccines can not permeate through the skin in desired rate.

To circumvent above limitation, years of research and development culminated into two approaches, namely chemical/passive and physical/active approaches. Chemical methods include modification of the SC permeability by influencing drug and vehicle interaction, and formulation optimization. In this method, the rate of drug diffusion mainly depends on MW as well as concentration gradient leading to difficulty even impossible to deliver large molecules across skin in time-controlled manner. Lag time in drug release may be the major limitation of chemical method which incurred with certain negative influence on rapid onset of action [15]. In chemical method, various classes of penetration enhancers are being incorporated into transdermal formulations to enhance the skin permeability [16]. It was reported that penetration enhancers, particularly organic solvents and surfactants, induce different skin ailments such as contact urticaria, erythema, and burning sensation [17]. In addition, there is no report in the literature on the long-term effect of penetration enhancers on the skin and particularly on the SC [18]. Active methods use the application of external energy as driving force or by physically disrupting the SC for enhancing drug transport through skin. This enables delivery of many drugs including lipophilic, hydrophilic, and macromolecules. This method also offers higher control over drug delivery profiles resulting in shorter lag period compared with chemical methods. In addition, the devices and their application parameters can be optimized to suite skin properties of individual patient [19]. Therefore, under physical approach, many techniques including iontophoresis, sonophoresis, electroporation, pressure waves, magnetophoresis, high-velocity jets, microneedles, tape stripping, and the SC ablation were successfully employed. All these techniques are having their advantages and disadvantages. For instance, iontophoresis, phonophoresis, and novel microneedle techniques induce pain at the administration site. One of the advantages of microneedles is being non-invasive. However, an additional step of sterilization of microneedles increases the cost of dosage regimen [17].

Thermal ablation is a promising technique for enhancing the permeability of the SC as it provides non-invasive drug delivery through microchannels created in the skin. These microchannels are still small enough to avoid undesirable effects such as pain, bleeding, irritation, and infection. Additionally, this technique has better control over physical and physiological impact on the skin. Furthermore, it offers effective delivery of high MW compounds such as proteins and peptides [20]. The technique involves treating the skin to the temperature well above 100 °C for sub-second which proved to be beneficial in enhancing the skin permeability. The intention of this technique is to create a high degree of temperature gradient across the SC. This leads to heating and vaporization of the SC either partially or fully, without damaging the skin underneath. Thermal ablation can be performed by (i) chemical heating, (ii) heating element-based thermoporation, (iii) RF, and (iv) laser [20, 21]. Therefore, this review mainly focused on different thermal ablation techniques with their advantages, disadvantages, marketed products, patents, and safety issues. This review also discussed briefly about the anatomy of the skin, different skin permeation pathways, and different generations of TDD.

Structure of the skin

The skin is the external covering or integument of the human body which receives about 1/3 circulating blood. Taking several factors into consideration like anatomy, age, and sex, functions of the skin are classified as protective, homeostatic, or sensorial. The skin is composed of three main layers: epidermis, dermis, and hypodermis as shown in Fig. 1 [22, 23].

Fig. 1

Structure of human skin

Epidermis

Depending upon the number of layers and size of the cells, the epidermis varies in thickness from one individual to another and also from region to region of an individual. The epidermis is multi-layered and is divided into two main regions: (i) non-viable epidermis and (ii) viable epidermis.

Non-viable epidermis (SC)

The SC is also called as horny layer which is the outermost layer of human skin and is about 10 mm thick in the dry state and when hydrated it swells many-fold in its thickness [10, 24]. It is composed of keratinized cells called corneocytes, which are arranged in multiple lipid bilayers. It serves as the main absorption barrier for the permeation of drugs with its unique ‘brick and mortar’ structure, where corneocytes are depicted as bricks and bilipid layers are assumed as mortar, due to its resembles with wall having bricks and cement mixture in between [25, 26].

Viable epidermis

It is located beneath the SC and is divided into four layers, viz., stratum lucidum, stratum granulosum, stratum spinosum, and stratum germinativum [10]. Stratum lucidum is also called a clear layer, usually made up of flat, clear, dead keratinocytes. Stratum granulosum constitutes 2 to 4 cell layers of keratinocytes and its thickness is 3 μm. Stratum spinosum or prickle cell layer lies just above the basal cell layer and composed of 8–10 layers of polygonal keratinocytes which are conjugated by desmosomes having thickness of about 50–150 μm. Stratum basale is an innermost layer of the epidermis and composed of a single layer of basal cells. It helps to retain the water (approx. 8%) but losses its ability with age [3].

Dermis

The dermis region is a 3–4-mm-thick layer and constitutes a matrix of connective tissues, blood vessels, sweat glands, hair follicles, lymph vessels, and nerves. The connective tissues such as collagen and elastic fibres provide strength and flexibility to the skin, respectively [3].

Hypodermis/subcutaneous layer

The hypodermis is richly supplied with larger blood vessels and lymph vessels. It acts as a support system for the dermis and epidermis and also as a fat storage zone. This layer provides mechanical strength and also regulates body temperature. It constitutes blood vessels, and nerves to skin and sensory pressure organs [25].

Penetration pathways for drug absorption

Depending on physicochemical properties of the drug and the site of drug/formulation application, the drug can have two potential routes: transepidermal route and transappendageal route or trans-follicular route [Fig. 2] [8].

Fig. 2

Penetration pathways in skin

Transepidermal route

The route, excluding trans-follicular region, through which applied drug molecules permeate the skin is called as transepidermal route. In this route, there are two pathways available for the drug permeation: transcellular/intracellular and intercellular/paracellular routes.

Transcellular route (intracellular route)

Transcellular pathway (across the cells) ensures the movement of drugs across the alternate layers of hydrophilic corneocytes and lipophilic lipid bilayers. Hence, this pathway requires both partitioning and diffusion steps in order to enter into systemic circulation. Therefore, transcellular penetration of drug molecules is unlikely to happen [27].

Intercellular route (paracellular route)

In intercellular pathway, the drug molecules permeate through continuous lipid matrix which is present between the corneocytes. This route is the most suitable and prevalent route for drug permeation for lipophilic substances as they have to diffuse through only lipid matrix. There are two extreme polarities present: hydrophilic environment formed by the polar head groups of the lipid bilayer and lipophilic characteristics due to the presence of long non-polar lipid chains. The later has the wider section within the bilipid layer. Thus, the permeability of lipophilic solutes changed with the degree of lipophilicity, whereas permeation of highly polar solute across the SC was proved to be almost constant [28]. One disadvantage of this pathway is that drug molecules have to cross longer distance [29, 30].

Trans-follicular route (shunt pathway)

The routes through the sweat gland, sebaceous gland, and hair follicle–associated sebaceous glands (pilosebaceous gland) are envisaged as transappendageal route. It is also called as shunt channels as drug molecules present in the topically applied formulations can bypass the SC barrier and even the viable epidermis to reach the underlying dermal layer. It is reported in the literature that transappendageal route is responsible for the diffusion of high MW solutes, nano-sized particles such as polymeric nanoparticles, and liposomes, cyclodextrin inclusion complexes, and slowly diffusing compounds [29, 31, 32].

Generations of transdermal delivery system

Even though there are pathways for drugs to cross the skin barrier in order to reach systemic circulation, they are unable to do so for most of the drugs due to their limitations. In order to circumvent these limitations, TDD has been evolved through several generations, focusing mainly on mechanisms of different methods to enhance drug permeation across skin and the extent of safety it can provide towards skin. These generations of TDD had used drug formulation strategy and passive diffusion in first-generation, non-invasive TDDS (transdermal drug delivery system) with external stimulation in second generation and minimal invasion in third generation [13] (Fig. 3).

Fig. 3

Different TDDS generations with their penetration enhancing techniques

First generation

First-generation TDDS exclusively focussed on delivering the drug across the skin on the basis of passive diffusion capability of the drug. Transdermal systems such as membrane-permeated/reservoir/matrix adhesive systems are included in first-generation systems [29, 33]. Soon after the approval of first transdermal patch by the US-FDA, there are approximately 19 transdermal patches that came to the market due to their better patient compliance [34]. However, the popularity of transdermal patches diminished very quickly when it was realized that only the drug molecules having specific physicochemical properties such as low MW, low daily dose, and high partition coefficient can only be considered for transdermal patch development. Therefore, the first-generation TDD is basically limited by its permeation across SC. However, this scenario can be reversed by tailoring more drug candidates in terms of physicochemical properties, to render them suitable for TDD [33].

Second generation

The second-generation transdermal systems deal with the different non-invasive enhancement techniques to increase drug permeation across the skin, including the use of chemical penetration enhancers [33, 35], particulate systems (e.g. emulsion and nanocarriers) [36-39], external stimuli assisted (e.g. light, mechanical force and magnetic field) [40-42], and electrically assisted techniques (e.g. iontophoresis, non-cavitational ultrasound) [43, 44]. Emulsion has the advantage of incorporating both hydrophilic and hydrophobic drugs within it. Emulsion of nano- or micron size and other nanocarriers such as liposomes and polymeric nanoparticles can permeate the tight junctions of skin barrier [45-47]. Iontophoresis involves the application of a weak electrical current below 500 μA/cm2, which has the ability to propel, preferably, the ionized drug across the skin. It has the advantages of stretching the MW limit of the solute up to 1000 Da and daily dose up to 50 mg [17].

Third generation

Penetration of large hydrophilic molecules and macromolecules such as DNA, therapeutic proteins, and vaccines across the skin is a challenge for techniques in second generation. Therefore, an alternative approach of minimally invasive methods is adopted to address the mentioned issues and all such methods are clubbed in third-generation TDD techniques [48]. In third generation, microscopic destruction of the epidermis was performed to facilitate the delivery of drug molecules, including microneedles, cavitational ultrasound, electrophoresis, microdermabration, and thermal ablation [29, 33]. Out of them, microneedle and thermal ablation techniques are being widely used. Microneedles, composed of micron-sized needles, are micro-invasive TDD technique which can be used to create transient aqueous conduits for easy delivery of diverse drug candidates [17, 49–52]. Thermal ablation techniques uses high-energy sources to remove the SC, either partially or completely, to improve drug permeation across the skin (thoroughly discussed later).

Techniques to enhance skin permeation

The barrier properties of the SC are manipulated by utilizing different technologies. These technologies are divided into passive/chemical or active/physical approaches [16, 53]. The principles and mechanisms of action of various methods/techniques under mentioned approaches are briefly discussed as follows.

Passive/chemical methods

Passive methods involve the modification of the SC by utilizing drug and vehicle interactions, followed by formulation optimization. Passive methods use penetration enhancers, supersaturated systems, prodrugs, liposomes, and other vesicles. All these methods have their own advantages and disadvantages. Among all, an immensely used passive approach is chemical penetration enhancers which assisted the drug to cross the SC without damaging the skin. This is because the incorporation of chemical penetration enhancers into transdermal patches and other formulations is easy compared with physical methods involving external stimuli. Chemical penetration enhancers would act by one or more of the following mechanisms [54]: (i) disrupting highly ordered bilipid structure of the SC (e.g. terpenes and azones) and enhancing drug permeation across intercellular route, (ii) interacting with protein structure of corneocytes (e.g. pyrrolidones, dimethylformamide, dimethyl sulphoxide), thereby opening up intracellular pathway, and (iii) improving of partitioning of solute across the SC (e.g. propylene glycol, polyethylene glycol) [3]. Skin permeability is exponentially enhanced by using chemical permeation enhancers which work by partitioning the drug in SC. The main obstacle of this method is a delay in drug release that will affect the rapid onset of action (increase in lag time). The currently marketed patches have shown some issues like irritancy and inadequate adhesion of patch. Furthermore, the size of the patch is restricted to ≤ 40 cm2, so the amount of drug load is also reduced [54]. In addition, the impotency of delivering large solute molecules through the skin by passive methods directed in developing different physical strategies.

Active/physical methods

In comparison with chemical methods, active or physical techniques are worthwhile in providing superior flexibility in composing a formulation and easy administration [16, 55]. To boost the permeation of the drug molecules into the skin, this method utilizes the external energy as a driving force to decline the barrier properties of SC. Recent advances have assisted in the creation of powerful devices that can bring about an essential clinical response. Active methods have achieved a priority which eventually led to the delivery of large MW (> 500 Da) hydrophilic molecules, such as proteins and peptides. Active/assisted enhancement techniques are under development to deliver biologics and large molecules. There are many physical methods across the generations. However, this review has mainly focus on thermal ablation technique.

Thermal ablation

Thermal ablation, also known as thermophoresis, involves the depletion or removal of the SC by the application of heat to enhance the drug permeation across the skin [15, 21]. Thermal ablation is a physical technique in which the SC is selectively vaporized followed by its removal from the skin surface, without damaging deeper tissue [21]. Therefore, the thermal exposure should be for short duration so that temperature gradient across the SC can be higher to maintain significant skin surface temperature compared with the underneath viable epidermis [56]. It can be achieved in two ways: (i) moderate temperature (≤ 100 °C) and long time, and (ii) very high temperature (≥ 100 °C) and short period. It is worthy to mention that the duration of thermal exposure was ranged from 1 μs to 100 ms. However, the second option is in great use because the SC temperature will be significantly increased due to high temperature; at the same time; no damage is being caused to deeper tissue due to short period of exposure. Following are the advantages of thermal ablation compared with other techniques [21]:

Thermal ablation is a very efficient physical technique compared with enhancement techniques in second and third generation.

This technique can deliver small molecules as well as macromolecules and vaccines.

Sterilization of microneedles is essential, but not the thermal ablation equipment.

It does not require charges on the solute molecules to be delivered across the skin as required in iontophoresis.

Compared with chemical penetration enhancement, where alteration in formulation is performed in order to incorporate it, thermal ablation does not require any change in formulation.

Thermal ablation can be performed by various ways such as chemicals, RF, and laser.

Different methods to achieve thermal ablation

Thermal ablation can be achieved by the following methods: (i) chemical heating, (ii) thermoporation, (iii) RF, and (iv) laser. Table 1 indicates various FDA-approved commercial products and products in pipeline of each method along with their advantages and disadvantages.

Table 1

List of FDA-approved commercial products and pipeline products in different clinical phases of each thermal ablation method along with their advantages and disadvantages [57–59]

Thermal ablation methods	Commercial/pipeline products	Company	Drug	Phase in clinical trials	Application	Advantages	Disadvantages
A. Chemical heating (iron oxide reaction/CHADD) (i) Commercial products	Synera®, Rapydan® -Iron oxide	Nuvo Research Inc., Canada	Lidocaine/tetracaine	---	Pain	✓ Based on types of initiator a sharp as well as slow and controlled temperature increase can be achieved	✓ Requirement of an additional component called initiator is essential.
(ii) Pipeline products	a) Matrix transdermal ketoprofen-CHADD™	Zars Pharma, now acquired by Nuvo Research Inc., Canada.	Ketoprofen	Phase-II	Osteoarthritis		✓ The permeation enhancement may be due to thermodynamic activity and inherent molecular diffusion ability of the incorporated drug in addition to heating mechanism.
	b) Matrix transdermal fentanyl-CHADD™	Zars Pharma, now acquired by Nuvo Research Inc., Canada.	Fentanyl	Phase-II	Pain
B. Thermoporation (i) Commercial products	a) PassPort™ system	Altea Therapeutics Corp., Atlanta, GA	-----	-----	-----	✓ Microporation technique can eliminate the risk of blood-borne pathogens transmission due to the use of sterilizable and disposable metal filaments.	✓ Generated excess heat can damage the deeper tissue and even induce thermohaemolysis.
	b) Tixel system	Novoxel, Landshut, Germany	-----	-----	-----		✓ Electric field limitations may be another concern as the filaments of the device are connected electrically.
(ii) Pipeline products	a) Insulin- PassPort™ system.	Nitto Denko, Japan	Insulin	Phase-I and Phase-II	Diabetes
	b) Apomorphine HCl- PassPort™ system	Altea Therapeutics Corp., Atlanta, GA.	Apomorphine HCl	Phase-I	Management of Parkinson’s Disease
	c) Fentanyl citrate- PassPort™ system.	Altea Therapeutics Corp., Atlanta, GA	Fentanyl citrate	Phase-I	Acute and chronic pain
C. Radiofrequency (i) Commercial products	ViaDor® system	Syneron Medical Ltd., Israel	---	---	---	✓ The microchannels are formed within milliseconds.	✓ This technique may cause skin damage of serious nature, when there is no appropriate contact between the applicator and tissue or else the applicator is lifted.
(ii) Pipeline products	a) hGh-ViaDor® system	Teva Neuroscience Inc., US	Human growth hormone or somatropin	Phase-I	Growth hormone deficiency	✓ Formed microchannels capable of sustaining the drug release in order to maintain desired blood levels.
	b) Teriparatide- ViaDor® system	Syneron Medical Ltd., Israel and Eli Lilly	Teriparatide	Phase-II	Osteoporosis	✓ It helps in delivery of wide range of drugs with hydrophilic nature and macromolecules.
	c) GLP1- ViaDor® system	Syneron Medical Ltd., Israel	Glucagon like peptide-I	Phase-I	Diabetes	✓ The size and density of the microchannels can be controlled and predicted with the incorporation of feedback mechanism in the RF-assisted devices.
	d) Calcitonin- ViaDor® system	Syneron Medical Ltd., Israel	Calcitonin	Phase-I	Osteoarthritis	✓ This technique has been demonstrated as safe with minimum adverse effects as only mild erythema has been reported.
	e) hPTH (1–34)- ViaDor® system	TransPharma	Synthetic human parathyroid hormone	Phase-I	Osteoporosis
D. Laser (commercial products)	a) P.L.E.A.S.E technology	Pantech Biosolutions AG, Ruggel, Liechtenstein Norwood Abbey, Victoria, Australia	-----	-----	-----	✓ This technique (fractional beam) provides large diffusion area due to ablation in several small areas at a specific depth in the target area.	✓ The full beam damages the entire targeted area.
	b) Epiture Easytouch™		-----	-----	-----	✓ The ablated skin heals very fast compared with other techniques.	✓ Photothermic mechanism leads to increase in temperature of the skin surroundings due to absorption of laser by water and other skin component.
						✓ Direct ablation (Er:YAG) resulted in minimum damage to the surrounding tissues.	✓ The fractional amount of energy is being absorbed by the water in the skin leading to energy loss and subsequently, cauterization of small vessels.
						✓ Pressure waves (mechanical waves) can reversibly change the skin barrier and increase the permeability temporarily.	✓ The recovery process photothermic mechanism is fast (within minutes) that can minimize the diffusion of drugs to the epidermis compared with CO2 and Er:YAG lasers.

Chemical heating based thermal ablation

Heat generated by chemical means has been used to enhance drug permeation across the skin. For local increase in temperature, an initiator is essential along with a chemical agent. The intensity of heat generated depends on the initiator. Generally, there are two initiators such as oxygen and water employed in commercial transdermal patches [57, 60]. An additional air permeable pouch is packed with the patches wherever oxygen is used as initiator. Heat is generated once oxygen comes in contact with the reaction mixture. This resulted in maintaining skin temperature approximately 42 °C for ≥ 4 h. However, the use of water as initiator can increase the temperature of the skin surface sharply up to 65 °C, which deemed to be very effective compared with oxygen. The chemical agent used most often is iron oxide, which in the presence of initiator undergoes oxidation and thereby generates heat [60]. This concept was first used to improve TDD of local anaesthetics such as lidocaine [61]. Lidocaine was studied for its release from carboxymethyl cellulose matrix both at saturated and sub-saturated levels using chemically generated heat. In this study, the heat generation efficiency of both the initiators such as oxygen and water was compared using iron oxidation. A sharp temperature variation was observed for the water as initiator compared with slow and controlled oxidation induced by oxygen. Therefore, higher drug diffusion across the polymeric matrix resulted in case of water as initiator. It is believed to be the alteration of the structure of the membrane and formation of regenerated cellulose membrane contributed to the result. However, the increased thermodynamic activity of lidocaine or inherent molecular diffusion cannot be tuned down completely [60].

A FDA-approved commercial product Synera® (known as Rapydan® in Europe) from Nuvo Research Inc., Canada, employs Controlled Heat-Assisted Drug Delivery (CHADD™) heating POD based on iron oxidation as source of heat energy [Fig. 4] [62]. The patch contains 70 mg each of lidocaine and tetracaine, and iron powder as heat-generating chemical. A different strategy called Eutectic Mixture Local Anaesthetics (EMLA®)–based cream containing each 2.5% of lidocaine and prilocaine was clinically compared with Synera®. A double-blind, randomized study with 82 adult human volunteers was conducted, where the Synera® patch was placed on one anticubutal surface and the EMLA® cream on the other before a vascular access procedure. The EMLA® cream exhibited better local anaesthetics than the Synera® patch after 10, 20, and 30 min of application, when subjects were rated for pain intensity employing a 100-mm visual analogue scale (VAS) [63].

Fig. 4

Lidocaine/tetracaine patch with CHADD™ technology (Synera®) (modified from reference [57])

Thermoporation-based thermal ablation

Thermoporation or microporation is a method of creating aqueous pathways across the SC that increases permeability of active ingredients through the skin into systemic circulation. In this method, an array of metallic filaments is held in contact with the skin surface for short duration (Fig. 5). These filaments are heated due to the passage of electric current through them, which resulted in the localized decomposition and vaporization of the SC. This led to the formation of microchannels on the skin surface. Thereafter, application of transdermal formulation such as gels, creams, patches, or vaccines will result in the enhancement of permeation of incorporated drugs [64, 65]. The advantage of microporation device is that it can eliminate the risk of blood-borne pathogen transmission due to the use of sterilizable and disposable metal filaments [66]. However, precaution must be taken since excess heat can damage the deeper tissue and even induce thermohaemolysis [67]. In addition, electric field limitations may be considered as the filaments of the device are connected electrically [57].

Fig. 5

Schematic representation of thermoporation. (a) Microelectrodes placed on skin, (b) microelectrodes traverse the skin and generated heat which ablated the skin, (c) micropores are formed and microelectrodes are removed, and (d) drug patch applied over the micropores to deliver the encapsulated drug (modified from references [21, 57])

Park et al. [20] had made a thorough investigation on the effect of heat on model drug calcein permeability across the human cadaver epidermis. The ex vivo experiment was conducted using a Franz diffusion cell with temperature ranging from 100 to 315 °C and time ranging from 100 ms to 5 s. It was observed that temperature had a strong influence on skin permeability, but not the duration of action. It was also observed that fewfold increase in TDD at temperature range of 100–150 °C (zone I), 1–2 orders of magnitude increase in flux at 150–250 °C (zone II), and 3-orders of magnitude enhancement of flux beyond 300 °C (zone III). The skin permeability enhancement for zones I, II, and III was due to disorderness of lipid structure, disruption of keratin structure, and decomposition and vaporization of keratin, respectively. At optimum conditions, calcein transdermal delivery was found to increase by 760-fold. In another study, Paranjape et al. [68] prepared an integrated patch composed of polydimethylsiloxane patch and micro-heaters for the transdermal delivery of glucose using human graft skin samples. They reported that an average temperature of 130 °C for more than 33 ms is required to create micropores in the SC. These formed micropores were capable of diffusing biomolecules such as glucose across the skin [68].

Commercial system

Thermoporation technique uses controlled thermal energy which could enhance the influx of drugs into the skin. Microporation can be created by an FDA-approved device PassPort™ and Tixel which are discussed below.

PassPort™

The Altea Therapeutics Corporation has made an important scientific and commercial breakthrough in the drug and vaccine delivery via the skin with its patented patch system, called PassPort™ (Altea Therapeutics Corp., Atlanta, GA). This technology is based on the ablation of the SC by the application of heat to create aqueous micropores. The depth of the micropore/microchannels is reported to be 50–200 μm in width and 30–50 μm in depth. This system warrants the non-invasive, affordable, and controllable delivery of drugs of various therapeutic classes. The advantages of this system are that it can avoid the use of needles, pumps, and costly devices which are employed in other techniques [56, 69]. In addition, a record of date and time of application of the patch by the patient is stored in the device [70]. Furthermore, the preclinical studies are conducted by Altea therapeutics on a wide range of molecules including parathyroid hormone, interferon-α, and hepatitis B antigen [23, 71].

PassPort™ is a re-usable thermal ablation device and consists of a handheld applicator, disposable porator microarray of tungsten wire which exerts short bursts of thermal energy and a patch (Fig. 6). Initially, the patch is coupled with an applicator and then the system is placed over the skin surface. The patch loaded applicator can be activated by simply pressing a button for a microsecond. Upon activation, the device passes electrical energy into microarray, which in turn is converted into thermal energy [71, 72]. This resulted to thermal energy creating microchannels in the SC and then the patch has to be placed over the microporated area [73, 74]. The thermal ablation patch possesses a surface area of 1 cm2.

Fig. 6

Application of assembled PassPort™ system, consisting of applicator device, porator, and electrode array of tungsten

Badker et al. [75] investigated the possibilities of delivering antiviral protein interferon alpha-2b (INFa2b) employing PassPort™ system with or without iontophoresis. The iontophoresis or passive transdermal delivery of INFa2b was not possible due to higher MW of 19.271 kDa. However, microporation method using PassPort™ system enables the delivery of INFa2b in vivo across hairless rats and the delivery was further improved, when both microporation and cathodal iontophoresis were employed simultaneously [75]. Delivery of recombinant H5 haemagglutinin vaccine via skin (intradermally) was successful in female mice, using PassPort™ system against a pandemic influenza virus. The enhanced immunogenicity had protected the mice from the exposure to potential danger of the H5N1 influenza virus [65].

Tixel

Tixel is a thermo-mechanical device used for fractional ablation of the SC, which was developed by Novoxel, Landshut, Germany. It basically has three parts: (i) the tip, (ii) handpiece, and (iii) motor (Fig. 7). The tip’s active surface comprised an array of 81 (9 × 9) tiny pyramid-shaped metallic pins with 1.23 mm of height and 100 μm of radius at the apex. Each miniature pyramid has a base surface area of 3 × 104 cm2 that is available for contact with the skin. The tip is attached to a handpiece and connected to a linear motor. The back end of the tip is connected to a tiny ceramic heater in order to keep the tip at a constant temperature of 400 °C during the operation. The device sterilizes, validates, and cleans the tip automatically [76].

Fig. 7

Schematic diagram of Tixel. (a) Metallic tip. (b) Handpiece. (c) Schematic representation of tip in motion and protrusion of Tixel during operation (protrusion indicates to a distance of the pins beyond the gauge, which is controlled to a desired length during tip motion operation) (modified from reference [76])

Its operation begins when the user places the handpiece flat on the skin and activates it. This leads to linear motor-driven advancement of the tip on to the skin surface at a predetermined ‘protrusion’ for a brief duration. During the course of the tip motion, there is an uninterrupted supply of electrical energy to the heater and operations such as speed, temperature, and protrusion distance of the tip are active and precisely controlled. During the contact, thermal energy is transferred to the skin, resulting in the evaporation of the SC and formation of micropores. The time of contact between the tip and the skin is generally adjusted between 6 and 18 ms, but more precisely, it should not be more than 9 ms as this time duration did not cause any skin necrosis or coagulation. The major advantage of Tixel is that it does not require a smoke evacuator and any protective eyewear for its operation [76].

Lee at al. [21] fabricated a thermal ablation device that has two major components: (i) microchamber which heats and ejects superheated steam and (ii) two masks which help in the transfer of energy from the device to the skin surface by acting as interface between the ejected superheated steam jet and the skin. They used two types of masks made up of titanium: (a) conductive mask used to allow the heat transfer without allowing the physical contact between steam and skin surface, and (b) window mask used to allow heat transfer to the skin through the windows/holes. They investigated permeability enhancement across full-thickness pig cadaver skin (ex vivo) of sulforhodamine B and bovine serum albumin (BSA) employing above device. The microdevice exhibited increase in skin permeability of 104-fold and 103-fold for sulforhodamine and BSA, respectively, when operated for 100 μs.

A study was undertaken to evaluate the influence of Tixel device on the permeability of three hydrophilic drug molecules such as verapamil HCl, diclofenac sodium, and magnesium ascorbyl phosphate (a more stable prodrug of vitamin C). Permeability of the active ingredients across pig skin was performed in vitro employing Franz diffusion system. The operational conditions used are as follows: (i) temperature of 400 °C, (ii) time period of 6/9 ms, and (iii) protrusion of 400 mm. They observed that verapamil HCl permeation at 24 h was increased from 17 ± 6.1 μg/cm2 in case of untreated skin to 168.2 ± 93.0 μg/cm2 (10-fold) and 382.6 ± 196.8 μg/cm2 (20-fold) in 6 ms and 9 ms for Tixel-treated skin, respectively. Similar patterns of drug permeation enhancement were observed for diclofenac (3-fold in 8 ms) and ascorbyl phosphate (~ 10-fold in 8 ms). They also reported that there was no significant collateral damage to the skin tissue and the absence of necrosis. In addition, the microchannels remained open and endured for at least 6 h after the treatment of Tixel [76].

Radiofrequency-based thermal ablation

RF is capable of forming micron-sized aqueous conduits in the SC and therefore it is considered as a promising technique which has wide applications in different fields such as electro-surgery, removal of malignant tissues, and in cosmetics for skin rejuvenation, skin tightening, and body contouring [77, 78]. RF-assisted thermal ablation involves the placement of an array of micro-electrodes directly onto the skin which is capable of generating an electric current into the skin in RF range of 100–500 kHz [52, 63, 79]. Exposure of the skin to high RF causes ionic vibration within the skin leading to generation of heat. This induced heat and causes liquid evaporation and ablation of the cells in that region of the epidermis. Depth of microchannels formed is limited to outer layers of the skin where blood vessels and nerve endings do not exist, thus reducing the pain and unpleasant sensation. The process is completed within few seconds and the microchannels are filled with interstitial fluid which possesses hydrophilic nature. Depending on the properties of microelectrodes, and the number and depth of the microchannels, the rate of drug delivery is controlled [26, 80, 81]. The RF-based ablation technique has many advantages, including (i) the microchannels are formed within milliseconds, (ii) it helps in delivery of wide range of drugs with hydrophilic nature and macromolecules, (iii) microchannels are capable of sustaining the drug release in order to maintain desired blood levels, and (iv) the size and density of the microchannels can be controlled and predicted with the incorporation of feedback mechanism in the RF-assisted devices [81, 82]. A RF-assisted device is composed of the following: (i) the device, (ii) microelectrode array (100 microelectrodes/cm2), and (iii) patch containing active ingredients.

Commercial product

RF-based thermal ablative device available commercially is the ViaDerm® device.

ViaDerm® system

The ViaDerm® system (now known as ViaDor®) was developed by TransPharma Medical™ Ltd. (Lod, Israel), which has now been acquired by Syneron Medical (Yokneam, Israel). ViaDor® RF is a self-administrable device that has been evaluated for the delivery of various hydrophilic compounds, peptides, and genes across the skin [77, 83, 84]. The components of the ViaDor® system include a reusable handheld battery-operated electronic controller, disposable microelectrode array having an electrode density of 100–200 microelectrodes/cm2, and a patch loaded with the drug. Each electrode receives a burst of energy as per the program set and generates vibration motion leading to localized heating. This heating creates microchannels in the skin and prepares the site for application of the transdermal formulations such as patch. The device is available in three different sizes (with treatment area of 1, 2.5, or 5 cm2 depending on the dose to be delivered [71, 80, 82].

This technique has been demonstrated as safe with minimum adverse effects. For instance, only mild erythema has been reported. However, skin damage of serious nature may happen; when there is no appropriate contact between the applicator and tissue, the applicator is lifted. However, advancement in the technique along with the development of new computerized circuit made the process of application safe by immediately switching the device off when there is any sense of energy impedance [56]. Another advantage of this technique is that it requires minimum operator training for the use of the device.

Patch technology for protein delivery

Thus far, there is no reported commercial technology which can incorporate proteins into transdermal patches. However, transdermal delivery of proteins is made possible by using the TransPharma Medical™ Ltd.’s unique printed patch technology after treating the skin with the ViaDor®. The drug is loaded into the patch in a dry state and is delivered into the previously formed microchannels. It is assumed that the highly water-soluble protein delivered into the microchannels is dissolved in interstitial fluid present in the microchannels leading to higher concentration of proteins in situ. Due to the existence of higher concentration gradient, the dissolved protein molecules transported to the viable epidermis of the skin which resulted in peak drug blood profile.

To manufacture a protein patch, the TransPharma Medical™ Ltd. has adapted a unique manufacturing dispensing technology. It involves three steps: (i) preparation of aqueous protein solution with buffer and stabilizer such as mannitol, sucrose, and trehalose, (ii) resulted solution is dispensed dropwise on to a non-adhesive liner, and (iii) drying of solution drops using stream of air/nitrogen to obtain protein patch. In this technique, the patch size and shape, drug load on the patch, and yield can easily be controlled [80, 82]. The preparation process does not involve addition of hydrophobic solvents or heating; thus, it is termed as an “environment friendly” manufacturing process. Furthermore, the drug loss during manufacturing is minimum and the process is capable of preserving the biological activity of proteins [77].

There are many researchers who used the ViaDor® system to ablate the SC and then applied various topical and transdermal formulations in order to enhance permeation of active ingredients across the skin. In this context, an investigation was carried out to enhance the permeability of two model drugs such as diclofenac sodium and granisetron HCl across full-thickness porcine ear skin in vitro and abdominal rat skin in vivo using double pre-treatment of the ViaDor® system containing 100 microelectrodes/cm2. The result showed that there was approximately 8-fold and 30-fold increase in diclofenac sodium and granisetron HCl plasma concentration after 6 h and 24 h of study, respectively, compared with passive diffusion [85]. Levin et al. [83] studied the influence of the RF-ablated skin on the permeation enhancement of human growth hormone across skins of rat and guinea pig in vivo. They observed 75% increase in bioavailability of hGH in rat model, whereas 33% increase of bioavailability in guinea pig, and compared subcutaneous injections. In addition, they also observed elevated levels of systemic insulin-like growth factor-1 indicating the bioactivity of hGH when administered transdermally.

The ViaDor® system has huge potential in delivering macromolecules and gene therapy vectors to the skin as their delivery can be controlled and targeted to the viable epidermis. Birchall et al. [84] successfully augmented the gene delivery and expression of a β-galactosidase reporter plasmid DNA applied to ViaDor™ (with 50 μm electrode arrays) treated full-thickness human breast skin. Furthermore, the intensity and extent of gene expression were found to be better when DNA formulation was applied prior to the application of ViaDor™. The delivery of another hydrophilic macromolecule complex testosterone-cyclodextrin (~ 2.5 kDa) across excised pig skin in vitro and hairless guinea pigs in vivo was studied. The in vitro permeation study across the skin was enhanced by 70-fold compared with control and the in vivo delivery was found to be extended up to 24 h post device application. The natural recovery occurs after 24 h, which was confirmed by the measured value of transepidermal water loss [86].

Factors influencing drug delivery through the RF-assisted microchannels are as follows: (i) molecular size of drug, (ii) solubility of drug in water, (iii) concentration of drug, (iv) microchannel density, (v) duration of drug delivery, (vi) dosage form of the drug, (vii) types of patches, and (viii) drug profile [77, 80, 82].

Laser thermal ablation

A typical medical laser used for thermal ablation comprised three parts: (i) pump source, (ii) lasing material, and (iii) optical cavity. These components govern the characteristics such as wavelength and energy of a laser device [87]. The operation of a laser device starts with the supply of input energy from pump source to lasing material, which excites most of its electrons to higher energy level. The movement of electrons from the excited state to the ground state induces the release of energy in the form of photons of light. These emitted photons produce optical activity because of their reflection between the reflectors, and this amplified light transmitted through the partial reflector is termed as laser light [88].

There are two laser conformations such as full beam and fractional beam based on the structure of laser beam. The former type of beam damages the entire targeted area, whereas the later one damages several small areas at a specific depth in the targeted area. Therefore, the fractional beam has advantages of the large diffusion area and heals very fast compared with full beam [89, 90]. There are three possible mechanisms with which the laser beam shall interact with the surface irradiated such as photothermolysis, direct ablation, and mechanical waves [91].

Photothermic mechanism works on the principle of absorption of the laser radiation by water or other skin components resulting in the increase in temperature of the surrounding skin. This leads to small skin burns or ablation. The major proponent of this type of interaction is CO2 laser (wavelength of 10,600 nm) and the mechanism involved is based on the vaporization and ablation [92]. The main disadvantage of this type of laser is that the fractional amount of energy is being absorbed by the water in the skin leading to energy loss. In addition, it leads to cauterization of small vessels; however, large blood vessels are not affected [93]. In case of direct ablation–assisted drug delivery, the interaction of the laser radiation with the skin resulted in the breakup and expulsion of skin parts at supersonic speeds. The foremost exponent for direct ablation is erbium-doped yttrium aluminium garnet (Er:YAG) lasing material–based laser. Compared with CO2 laser, Er:YAG laser emits radiation of higher wavelength (2936 nm). The prominent advantage of this is that maximum energy (12–18-fold higher than CO2 laser) of the radiation is absorbed by water available in the skin. The transition of energy is described as photomechanical that creates micropores by microexplosions of water molecules present in the skin. This resulted in minimum damage to the surrounding tissues [88]. This is the reason why Er:YAG laser is most often used in the cutaneous drug delivery. The third mechanism involves the generation of mechanical waves to enhance TDD. The mechanical waves are generated either by direct irradiation of material in contact with the skin by the beam of laser light or confined irradiation due to overlay present at the top of irradiated material [91, 94]. The pressure waves generated create transient pores within the SC lipids by expanding the lacular spaces within the intercellular regions of the SC without inflicting ablation. Therefore, this method is also considered as non-invasive mechanism. The potential advantage of pressure waves is that they can reversibly change the skin barrier and increase the permeability temporarily. However, the recovery process is fast (within minutes) that it can minimize the diffusion of drugs to the epidermis compared with CO2 and Er:YAG lasers. The irradiated materials used are metallic films such as sole metal (e.g. aluminium, lead, gold), composites (e.g. epoxy resin and graphite powder plastic film with aluminium), and bilayer film of polyvinyl chloride and gold. The function of these materials is to convert light energy to pressure energy [89].

There are four different phases in laser-based ablation such as heating of the skin (37–60 °C), coagulation (60–65 °C), drying (90–100 °C), and finally, vaporization (> 100 °C) [95]. The degree at which the SC layer disrupted is controlled by many parameters such as wavelength, tissue thickness, pulse energy, length, number and repetition rate, tissue absorption coefficient, and the duration of laser exposure. Several types of lasers with broad wavelengths are tested but very few can be applied transdermally to deliver the drugs causing little tissue damage. Lasers are divided into two types: non-ablative and ablative. Both are utilized for enhancing the transdermal permeation of drugs [96]. The example of the former class is Ruby lasers, which showed no/negligible damage to the skin. However, partial or complete removal of the SC occurs in the latter case and the examples are CO2 and Er: YAG laser [97]. The details about the two types of lasers are mentioned in Table 2.

Table 2

Lasers used in delivery of drug through transdermal route [96, 98, 99]

Laser type	Wavelength (nm)	Pulse duration	Role in transdermal delivery
Ruby	694	25–40 ns	Permeabilization of SC
CO2 laser	10,600	50 ms	Ablation via vaporization
Er: YAG	2940	250–400 μm	Ablation via vaporization

Ablative lasers are used to enhance the absorption of drugs across the skin of diverse therapeutic classes. Among them, analgesics of opioid class and non-steroidal anti-inflammatory drugs were investigated to a large extent compared with other classes of drugs. Lee et al. [100] investigated the feasibility of employing Er:YAG laser to enhance and control transdermal delivery of opioid analgesics such as morphine, nalbuphine, and buprenorphine. Their oral administration suffers due to low oral bioavailability and short half-lives. Therefore, an in vitro permeation experiment was performed across laser-treated pig skin to enhance their permeation. There was 10- to 35-fold of permeation enhancement of above drugs depending on the fluence (energy applied per unit area) ranging from 1.7 to 2.6 J/cm2 and physicochemical properties such as lipophilicity and MW. Due to higher MW and lipophilicity, buprenorphine exhibited lesser skin permeability compared with morphine and nalbuphine. In another study, transdermal flux of nalbuphine was increased by 73-fold, when Er:YAG laser was used (fluence between 0.9 and 17.5 J/cm2) compared with non-treated group. Indomethacin has same MW of 357 Da as nalbuphine, but its transdermal flux improved by 7.5-fold using laser ablation with same fluence. This result was attributed to the difference in log P value with higher value for Indomethacin (log P of 4.2) compared with nalbuphine (log P of 0.2) [101].

Lee et al. [96] conducted an in vitro permeation study to deliver 5-fluorouracil transdermally across full-thickness skin of female nude mice employing 3 lasers such as ruby, Er:YAG, and CO2. The permeation of 5-fluorouracil was moderately increased through the skin by single-pulse photomechanical wave generated by a ruby laser (at 4.0 and 7.0 j/cm2), without severely affecting the structure of the skin. Er:YAG laser partially ablates the SC and increases the flux of 5-fluorouracil by 53- to 133-fold higher than that of intact skin. This is attributed to the combination of the SC ablation and thermal effect. However, lower energies of CO2 laser were unable to modulate permeation of 5-fluorouracil, but higher fluences (4.0 and 7.0 J/cm2) increased the flux from 36- to 41-fold. In an interesting investigation, Gomez et al. [102] examined permeation enhancement ability of neodymium-doped yttrium aluminium garnet (Nd:YAG) laser on in vitro transdermal delivery of 5-fluorouracil across pinna skin of the inner side of rabbit ear. Nd:YAG laser at 355 nm was used in in vitro study and the result showed that the enhancement ratio for drug permeation was increased from 2.36 to 429, with increasing the fluence from 0.3 to 2 J/cm2. The Nd:YAG laser was found to remove the SC and some viable epidermal layers as well. In another study Liu et al. [103], two output modes of Nd:YAG laser at 1064 nm such as long-pulsed (15 J/cm2) and Q-switched (0.5 J/cm2) for permeation of glycerol across Wistar rat skin were compared. The results demonstrated similar glycerol permeation–enhancing capacity possessed by both the modes. The long-pulsed irradiation made corneocytes fragile and exfoliative by increasing the skin temperature and loosened keratin. However, Q-switched mode completely disrupted corneocytes and keratin, thereby enhancing the glycerol permeation.

Topical delivery of DNA and transdermal delivery of protein and peptides seem to be attractive for the prevention and treatment of skin as well as systemic diseases. However, this delivery method is limited by the impervious SC layer of skin. In order to circumvent this barrier, Lee et al. [104] employed Er:YAG laser to enhance the delivery and expression of antisense oligonucleotides and DNA in the skin of nude mice. In vitro permeation study resulted in the 3- to 35-fold increase in antisense oligonucleotides permeation in case of ablated skin compared with the untreated skin. The permeation was found to depend on the fluence of laser and molecular mass of antisense oligonucleotides. DNA expression was found to be 160-fold superior for ablated skin than that of intact skin. In another study, peptides and related vaccine (lysozyme antigen) were delivered transdermally with Er:YAG laser. It was observed that there is 3- to 140-fold increase in peptide permeation across the partly ablated skin of nude mouse/hairy mouse compared with untreated skin in vitro. The other factors that played important role in permeation enhancement were molecular size (peptides with a larger molecular size demonstrated higher enhancement compared with the smaller counterpart), lipophilicity, and sequence of peptides. It was also observed that laser treatment alone (no adjuvant or penetration enhancer) significantly enhanced (3-fold) production of antibodies in the serum, after in vivo skin vaccination of lysozymes [105].

Lee et al. [106] investigated the in vitro permeation enhancement of magnesium ascorbyl phosphate across nude mouse skin employing laser techniques (Er:YAG and CO2 lasers) and microdermabrasion (SC stripping). They observed that Er:YAG laser greatly enhanced vitamin C permeation with 86.04- to 260.86-fold increase and skin deposition of the drug with 71.56- to 123.22-fold enhancement compared with intact skin. In case of CO2 laser, there is an 8.19-fold increase in vitamin C flux at lower fluence (1.4 J/cm2), which could not ablate any of the SC or epidermal layers. However, at higher fluences such as 4.0 and 7.0 J/cm2, the SC layer was sufficiently ablated. Enhancement of flux is lower in case of CO2 laser compared with Er:YAG, which is due to skin tightening by CO2 laser. Microdermabrasion ablates a portion of the SC layer, thereby moderately enhancing skin permeation and deposition of vitamin C [107]. In another study, Hsiao et al. [107] investigated the influence of both Er:YAG and CO2 lasers on the permeation enhancement of two vitamin C derivatives such as ascorbic acid 2-glucoside (AA2G) and 3-O-ethyl ascorbic acid (EAC) across the skin of female nude mouse (Balb/c-nu strain) in vitro. The flux of AA2G and EAC across the Er:YAG laser (with fluence ranging from 2.5 to 6.3 J/cm2)–treated skin showed 35- to 78-fold and 105- to 189-fold increase, respectively, compared with flux across intact skin. In case of CO2 laser–treated skin at 5 W, the flux enhancement was found to be 82-fold and 181-fold for AA2G and EAC, respectively, than their flux across untreated skin [108].

Lee et al. [108] studied the release of doxorubicin from hollow gold nanocells in a near-infrared-induced ablated skin. In vivo study was conducted using female Sprague-Dawley nude mice. Histological investigation demonstrated that combination of laser and intratumoral injection showed maximum tumour necrosis compared with treatment without laser. The photoaccoustic imaging revealed the increase in temperature of tumour cell from 37 to 50 °C. Thus, combination of laser and nanoparticles loaded with doxorubicin has huge potential for the local anticancer therapy. Imiquimod, a receptor-7 agonist, is used to treat external genital and perianal warts, and actinic keratosis (consistent with squamous cell carcinoma histological) by boosting cutaneous immune response. In vitro study was conducted employing excised porcine dorsal skin or nude mouse using Franz diffusion cell and in vivo study was performed by applying imiquimod over pre-treated dorsal skin of nude mice. Imiquimod flux was found to be increased both in vitro and in vivo with Er:YAG laser treatment. It was observed that a concentration of 0.4% from an aqueous vehicle in combination with laser treatment produces approximately same flux as commercial cream with 5% of imiquimod dose without laser treatment. It was also observed that by increasing the fluencies from 2 to 3 J/cm2, the drug flux was found to be increased from 46-fold to 127-fold [109]. Transdermal delivery of 5-aminolevulinic acid was envisaged with laser (Er:YAG and Nd:YAG)-assisted method in order to avoid its poor permeability across intact skin. The drug permeation was found to be increased in laser-ablated skin and the highest flux enhancement of 200.3-fold was observed for the laser wavelength of 2940 nm and fluence of 1.6 J/cm2 compared with laser-untreated skin [110]. Presently, small interfering RNA (siRNA)–based therapy is being widely used to treat various heritable skin disorders such as actinic dermatitis, actinic keratosis, and skin cancer. However, its treatment through topical route suffers due to rigid barrier of the SC. To overcome this known hindrance, Lee et al. [111] employed Er:YAG and CO2 lasers to investigate permeation enhancement of siRNA in vitro using full-thickness skin of nude mouse and in vivo using nude mouse. They reported an 11-fold and 12-fold increase in fluxes of siRNA for Er:YAG and CO2 laser, respectively, compared with laser-untreated skin. They also reported that hair follicles are the major drug deposition areas for laser-treated skin.

Lee et al. [112] employed fractional CO2 laser to investigate in vitro permeation enhancement of small molecules as well as macromolecules using fluorescein isothiocyanate-labelled dextran as model drug at four different MW such as 4, 10, 20, and 40 kDa across excised and dermatomed porcine skin. They observed that in employing fractional CO2 laser, it is possible to improve the skin permeation enhancement of compounds of diverse MW.

Initially, laser ablation technique is expensive and particularly restricted to hospitals but the development of handheld devices made it possible to ablate the SC by avoiding pain. Currently, the laser ablation–based systems available in the market are as follows: (i) Painless Laser Epidermal System (P.L.E.A.S.E.®) technology developed by Pantech Biosolutions AG (Ruggel, Liechtenstein), and (ii) Epiture EasytouchTM developed by Norwood Abbey (Victoria, Australia).

P.L.E.A.S.E.® technology

P.L.E.A.S.E.® technology uses Er:YAG laser which emits light at 2940 nm and facilitates its absorption by water molecules. The excitation of molecules leads to the formation of pores by heat generation and evaporation at the site of application in epidermis and allows minimum heat to surrounding tissues [85, 91]. The diameter of pores ranges from 50 to 200 μm and the depth is controlled by the application of low-energy lasers where conventional Er:YAG laser forms micropores of 7-mm depth. P.L.E.A.S.E.® is the most convenient and safe device which painlessly delivers the drugs, and is able to control the size and depth of pores [99]. The P.L.E.A.S.E.® device is the latest technology which assists in the delivery of large molecules and bioactive agents through the skin [113, 114]. Step-wise process of using P.L.E.A.S.E.® device is mentioned as follows [114, 115]:

Before the poration process, the licenced medical personnel fixes the parameters needed for the therapeutic delivery of applied drug patch.

The device with a disposable tip is pressed on to the application site by pressing the on button. It creates micropores with a depth of 1/10 mm.

The formulations such as patch/gel/cream-containing drugs are applied on the microporated skin sample. Thereafter, the incorporated drug is delivered into systemic circulation via micropores.

Safety profile demonstrated that P.L.E.A.S.E.® enables painless delivery through the skin and no infections were reported in clinical settings. In addition, no pigmentation and texture changes were observed in a 3-month study period. Preclinical studies reported so far described its utilization in the delivery of diabetes, pain, and vaccines.

EPIMMUM™ patch

EPIMMUM™ is a process which uses P.L.E.A.S.E.® device to deliver immunogen via laser-microporated skin (Fig. 8). The laser microporation creates an inflammatory stimulus and boosts immune response. This technology assists in painless delivery of immunogen to targeted skin layers. It aids in delivery of huge vaccine market for treatment of various diseases like cancer, allergy, infectious diseases, autoimmune diseases, and Alzheimer’s. These patches are having many advantages:

Fig. 8

Functioning of EPIMMUM™ patch. (i) Formation of micropores using P.L.E.A.S.E.® and (ii) application of patch to deliver immunogen

Suitable to use in paediatric patients as it is painless and needle free.

Easy to use and fast application is possible.

Negligible contamination.

Reproducible when compared with microneedles.

Immunogenicity is improved when compared with delivery through subcutaneous or intramuscular route.

Inexpensive compared with syringe cost.

Bachhav et al. [116] determine the influence of pore number and depth on the rate and extent of lidocaine delivery across porcine ear skin as model membrane. There are statistically significant differences in the cumulative skin permeation of lidocaine between 0 (control, without porated skin) and 150 pores with that of higher porated skin (300, 450, and 900 pores). However, cumulative permeation of lidocaine between higher porated skin was statistically insignificant, which may be due to the delivery of > 50% of applied dose. Similarly, swallow pores (selective removal of 20–30 μm, 60–100 μm, and > 150–200 μm of SC) did not exhibit any statistical significance in cumulative permeation of lidocaine across the skin. They concluded that P.L.E.A.S.E.® has the ability to create well-defined pores of size (150–200 μm) in the skin and is able to enhance both the rate and extent of lidocaine permeation. However, Yu et al. [117] reported there is significant increase in prednisolone deposition and permeation across ear skin of mice with the increase in number of pores and fluence created by P.L.E.A.S.E.® device. It was observed that a 4-fold increase in pore numbers (450 to 1800) demonstrated more than 3-fold increase in drug permeation and deposition (60.85 ± 14.05 to 197.18 ± 29.62 μg/cm2). Likewise, approximately 3-fold increase in prednisolone delivery (47.54 ± 4.90 to 135.59 ± 6.85 μg/cm2) was witnessed with 2-fold increase in fluence (22.65 to 45.3 J/cm2). In another study, Bachhav et al. [118] reported a significant increase in diclofenac delivery across porcine skin in vitro with increase in number of micropores created and fluency used employing P.L.E.A.S.E.® device. For instance, increasing number of pores (50–80 μm) from 150 to 900 leads to increase in diclofenac delivery from 3.7-fold to 13-fold enhancement compared with laser-untreated skin. Likewise, there was more than 3-fold increase in permeation of drug with 6-fold increase in fluency. Diclofenac delivery from marketed gel (Solaraze™) also found to be increased across laser-porated skin compared with untreated skin of mice. They also observed that there was statistical equivalent in the case of the human skin [118]. Puri et al. [119] made a comparative permeation study of 3-fluoroamphetamine HCl across dermatomed human skin in vitro employing passive, chemical technique using oleic acid as penetration enhancer and physical technique such as microneedle, laser, and iontophoresis. Compared with passive method, there were 508-fold and 548-fold increase in drug permeation for laser-treated microporated skin and anodal iontophoresis, respectively. In addition, ablative laser technique showed minimum lag time and thereby exhibiting faster onset of action. Due to short half-life, low oral bioavailability, and several systemic adverse effects caused by oral administration of pentoxifylline, an attempt was made to administer it through cutaneous route on a P.L.E.A.S.E.-treated skin for the treatment of peripheral arterial diseases. Intact as well as porated fresh porcine ear skin was used as model membrane. It was observed that poly(lactide-co-glycolide)-based microparticles contain the drug deposited in the micropores and serve as an intraepidermal depot that ensures sustained drug release without repeated microporation as well as after the closer of micropores [120].

Vaccines may be delivered through intramuscular, subcutaneous, or cutaneous routes. Out of them, cutaneous route is considered to be more effective based on its profuseness in targeting antigens and immunocomponent cells. But the presence of the SC layer on the surface of the skin makes the cutaneous immunization challenging. In this context, creation of micropores in the SC with laser ablation method and then transcutaneous immunization (TCI) seems to be the best option. This is because TCI using fractional laser–based ablation will allow vaccination in a defined, painless, and reproducible manner. Weiss et al. [121] studied the possible induction of immune response through transcutaneous route using P.L.E.A.S.E.® device and then compared with immunization through subcutaneous route using dermatomed porcine ear skin in vitro and female mouse (Balb/c and C57BL/6) in vivo. They reported that the formation of precise micropores of defined number and depth induced high levels of antigen uptake. In addition, the generation of immune responses was equal or higher compared with those induced by subcutaneous injection of antigen. In another study, hepatitis B surface antigen (HBsAg) was successfully administered through the skin of female mouse (Balb/c) in vivo employing TCI with microporation. The laser (P.L.E.A.S.E.® device) was used to fractionally ablate the SC. The factors such as pore number, fluence, and adjuvants played a major role in the immunization process. It was observed that the optimized HBsAg induced similar antibody titers compared with intramuscular injection of HBsAg [122].

The success and the safety of laser technology mainly depend on skin recovery. In this context, Lee et al. [97] investigated the mice skin recovery after the application of Er:YAG laser and CO2 laser for 7 days. After laser treatment, biopsy specimens were collected from day one to day seven and treated with haematoxylin and eosin followed by sectioning. Then, these sections were visualized under a microscope. The results demonstrated that the pores created due to the application of Er:YAG laser created were recovered in 4 days. However, the skin samples treated with CO2 laser required 5 days to recover to its normal state.

Epiture easy touch™

Epiture easy touch™ device uses Er:YAG laser with a 3.6 V DC rechargeable batteries. It is a hand-held portable device approved by the US and Australian regulatory bodies for the administration of locally applied anaesthetics. It has the advantage of avoiding damage to deeper skin tissues and employed to perform clinical trials for the delivery of local anaesthetics [114]. Epiture easy touch™ device is beneficial in delivery of over the counter lidocaine (4%) resulted in dermal anaesthesia in 5 min [123]. Table 3 summarizes various thermal ablation techniques with devices used to enhance drug permeation across skin and their obtained results. A list of patents approved is presented in Table 4.

Table 3

Different thermal ablation techniques with devices used to deliver various classes of drugs and their obtained results

Ablation method	Formulations/device	Drugs with their physicochemical properties	Results	References
Chemical heating	Carboxymethyl cellulose–based matrix	Lidocaine (MW = 234.3 Da, log P = 2.4 and plasma half-life = 1–2 h)	A sharp temperature variation was observed for the water as initiator compared with slow and controlled oxidation induced by oxygen.	[60]
	Patch/CHADD™ heating POD	Lidocaine and prilocaine (MW = 220.3 Da, log P = 2.1 and plasma half-life = 1–2 h)	Improved the drug permeation significantly.	[63]
Thermoporation	---	Calcein	Optimum conditions led to 760-fold increase in calcein transdermal delivery.	[20]
	Integrated patch composed of polydimethylsiloxane patch and micro-heaters.	Glucose	Formed micropores were capable of diffusing biomolecules such as glucose across skin.	[68]
	PassPort™ system	Interferon alpha-2b (INFa2b) (half-life = 5–6 h and MW = 19.271 kDa)	Drug delivery was improved with the simultaneous use of microporation and cathodal iontophoresis.	[75]
	Vaccine/PassPort™ system	Recombinant H5 haemagglutinin	Enhanced immunogenicity in the mice.	[65]
	Drug in PBS/fabricated thermal ablation device	Sulforhodamine (MW = 558 Da) and BSA MW = 66,000 Da)	Improved skin permeability of 104-fold and 103-fold, respectively	[21]
	Tixel	Verapamil HCl (MW = 491.1 Da, plasma half-life = 2–7 h, log P = 3.8, and pKa = 4.0), diclofenac sodium (MW = 318.1 Da, plasma half-life = 1–2 h, log P = 4.5, and pKa = 4.0), and magnesium ascorbyl phosphate (MW = 176.1 Da)	Significant enhancement of drug permeation.	[76]
Radiofrequency	Granisetron solution in PBS pH 7.4 and diclofenac sodium in ethyl alcohol: PBS pH 7.4 (1:9)/ViaDor™	Diclofenac sodium and granisetron HCl (MW = 348.9 Da, half-life = 3–4 h and pKa = 9.4)	Compared with passive diffusion, there were 8-fold and 30-fold increase in diclofenac sodium and granisetron HCl plasma concentration after 6 h and 24 h of study, respectively.	[85]
	ViaDor™	Human growth hormone (hGH) (MW = 22 kDa)	75% increase in bioavailability of hGH in rat model, whereas 33% increase of bioavailability in guinea pig, compared with subcutaneous injections.	[83]
	ViaDor™	Gene delivery and expression of a β-galactosidase reporter plasmid DNA	The intensity and extent of gene expression was found to be better when DNA formulation was applied prior to the application of ViaDor™.	[84]
	ViaDor™	Testosterone (MW = 288.4 Da, log P = 3.3 and practically insoluble in water)	The delivery of testosterone-cyclodextrin complex was significantly increased and the delivery was also extended up to 24 h post device application	[86]
Laser	Er:YAG laser	Morphine (MW = 303.4 Da, log P (octanol/pH 7.4) = − 0.1, pKa = 8.0, and plasma half-life, about 2 to 3 h), nalbuphine (MW = 357.4, plasma half-life, about 5 h, log P = 0.2), and buprenorphine (MW = 467.6 Da, log P = 4.98, Plasma half-life = 1.2 to 7.2 h, and pKa = 8.5, 10.0)	There was 10 to 35-fold enhancement of all the drugs, which depends on the fluence (used at 1.7 and 2.6 J/cm2), lipophilicity, and MW of the individual drug.	[100]
	Er:YAG laser	Nalbuphine and indomethacin (MW = 357 Da, log P = 4.2, plasma half-life = 3 to 15 h, and pKa = 4.5)	Flux of nalbuphine and indomethacin were increased by 73-fold and 7.5-fold, respectively.	[101]
	Ruby, Er:YAG and CO2	5-fluorouracil (MW = 130.1 Da, sparingly soluble in water, and pKa = 8.0, 13.0)	Ruby laser moderately enhanced skin permeation. However, Er:YAG and CO2 enhanced skin permeation by 53- to133-fold and 36- to 41-fold higher than that of intact skin, respectively.	[96]
	Nd:YAG laser	5-Fluorouracil	Enhanced the skin permeation more than 182-fold compared with intact skin.	[102]
	Nd:YAG laser	Glycerol	Glycerol permeation enhancing capacity possessed by both the modes: long-pulsed (15 J/cm2) and Q-switched (0.5 J/cm2)	[103]
	Er:YAG laser	Antisense oligonucleotides (ASOs)	Antisense oligonucleotides permeation and DNA expression were found to be enhanced by 3- to 35-fold and 160-fold, respectively, for ablated skin than that of intact skin.	[104]
	Er:YAG laser	Peptides (MW ranged from 5000 to 8000 Da) and related vaccine (MW = 14,307 Da)	3- to140-fold increase in peptide permeation across the partly ablated skin of mice compared with untreated skin.	[105]
	Er:YAG and CO2 lasers	Magnesium ascorbyl phosphate	Er:YAG laser and CO2 laser enhanced magnesium ascorbyl phosphate permeation by 86.04- to 260.86-fold and 8.19-fold, respectively.	[106]
	Er:YAG and CO2 lasers	Ascorbic acid 2-glucoside (AA2G) and 3-O-ethyl ascorbic acid (EAC)	Er:YAG laser enhanced the permeation by 35- to 78-fold and 105- to189-fold for AA2G and EAC, respectively. Whereas CO2 increased the flux by 82-fold and 181-fold for AA2G and EAC, respectively, compared with intact skin.	[107]
	Hollow gold nanocells/Er:YAG laser	Doxorubicin (MW = 543.5 Da, log P = 1.3 and hydrophilic nature)	Combination of laser and intratumoral injection showed maximum tumour necrosis compared with treatment without laser	[108]
	0.4% from an aqueous vehicle/Er:YAG laser	Imiquimod (MW = 240.3 and log P = 2.7)	0.4% from an aqueous vehicle in combination with laser treatment produces approximately same flux as commercial cream with 5% of imiquimod dose without laser treatment	[109]
	Er:YAG and Nd:YAG	5-aminolevulinic acid (MW = 167.6 Da and hydrophilic nature with SC/water partition coefficient = 0.1)	Drug permeation was found to be increased in laser ablated treated skin and the highest flux enhancement was found to be 200.3-fold	[98]
	Er:YAG and CO2 lasers	Small interfering RNA (siRNA)	There were 11-fold and 12-fold increase in fluxes of siRNA for Er:YAG and CO2 laser, respectively, compared with laser-untreated skin.	[110]
	CO2 laser	Fluorescein isothiocyanat-labelled dextran (MW = 4, 10, 20 and 40 kDa)	Improve the skin permeation enhancement of compounds of diverse MW.	[111]
	P.L.E.A.S.E.® device	Lidocaine	P.L.E.A.S.E. ® has the ability to create well-defined pores of size (150–200 μm) in the skin, and able to enhance both the rate and extent of lidocaine permeation.	[116]
	P.L.E.A.S.E.® device	Prednisolone (MW = 360.4 Da, and log P = 1.6)	There was a 4-fold increase in pore numbers (450 to 1800) which demonstrated more than 3-fold increase in drug permeation and deposition.	[117]
	P.L.E.A.S.E.® device	Diclofenac	Increasing number of pores from 150 to 900 leads to increase in diclofenac delivery from 3.7-fold to 13-fold enhancement compared with laser-untreated skin. Likewise, there was more than 3-fold increase in permeation of drug with 6-fold increase in fluency.	[118]
	P.L.E.A.S.E.® device	3-fluoroamphetamine HCl (MW = 189.66 Da and pka = 9.97)	Compared with passive method, there were 508-fold and 548-fold increase in drug permeation for laser-treated microporated skin and anodal iontophoresis, respectively. In addition, ablative laser technique showed minimum lag time.	[119]
	Microparticles/P.L.E.A.S.E.® device	Pentoxifylline (relatively hydrophilic with log P = − 0.149 ± 0.759)	Drug deposited in the micropores produces an intraepidermal depot that ensure sustained drug release without repeated microporation as well as after the closer of micropores	[120]
	P.L.E.A.S.E.® device	Hepatitis B surface antigen (HBsAg)	Optimized HBsAg induced similar antibody titers compared with intramuscular injection of HBsAg	[122]

Table 4

List of patent granted by various authorities on different thermal techniques to improve skin permeation

S. no	Patent number	Inventor	Current assignee	Technique	Reference
1	US6708060B1	Zohar Avarhami, Ze’ev Sohn	Syneron Medical Ltd.	RF-assisted	[124]
2	US7395111B2	Galit Levin, Meir Stern, Dorit Daniel	Syneron Medical Ltd.	RF-assisted	[125]
3	US 6148232	Zohar Avrahami	Syneron Medical Ltd., TransPharma Ltd	RF-assisted	[126]
4	US7452358B2	Roger A. Stern, Mitchell Levinson, Bryan Weber	Solta Medical Inc.	RF-assisted	[127]
5	US7481809B2	Roger A. Stern, Mitchell Levinson, Bryan Weber	Solta Medical Inc.	RF-assisted	[128]
6	US4775361A	Stephen L. Jacques et. al	General hospital corp of MA, General Hospital Corp.	Laser-assisted	[129]
7	WO1997007734A1	Jonathan A. Eppstein et. al			[130]
8	WO2001050963A1	Kevin S.Marchitto, Stephen T. Flock		Laser-assisted	[131]
9	US5643252A	Milton Waner et. al	Transmedica International Inc.	Laser-assisted	[132]
10	US20050247321A1	Milton Waner, Charles Vestal, Stephen Flock		Laser-assisted	[133]
11	US20100292680A1	Thomas Bragagna, Arne Heinrich, Simon Gross	PantechBiosolutios AG	Laser-assisted	[134]
12	WO2006111201A1	Thomas Bragagna et. al		Laser-assisted	[135]
13	ES2334705T3	Christof Bohler et. al	PantechBiosolutions AG	Laser-assisted	[136]
14	EP1874213B1	Christof Bohler et. al	PantechBiosolutions AG	Laser-assisted	[137]
15	US8116860B2	Bernadette Messier et. al	Nitto Denko Corp.	Thermal ablation	[138]
16	US6711435B2	Zohar Avarhami	Syneron Medical Ltd., Transpharma	Thermal	[139]
17	EP1450876B1	Zeev Sohn	Syneron Medical Ltd.	Thermal	[140]
18	WO2006004595A2	Mark Prausnitz et. al		Thermal	[141]

Side effects/safety related to thermal ablation

Safety and tolerability are evaluated on the basis of the frequency of adverse events that occur after the application of formulation on the thermally ablated skin. The measurement is based on the presence of oedema and erythema, and results are quantified using the Draize irritation index for irritation and erythema on a scale of 0–8 and VAS for pain on a scale of 0–100. The Draize index and VAS score were found to be 0.75 and 5, respectively, indicating occurrence of erythema and pain to less extent. Slight erythema was reported for the use of prototype for PassPort™ system [75]. Likewise, the application of lidocaine/tetracaine patch (Synera™) resulted in most common adverse events such as erythema, blanching, and oedema in multiple clinical trials [63].

Among three lasers employed, ruby laser did not produce any observable disruption in the skin structure, indicating ruby laser is safe for the enhancement of drug permeation across skin. However, Er:YAG or CO2 laser necessitates 3–5 days of the recovery of the SC barrier function after radiation and complete recovery is not observed until 7 days. The skin recovery is measured in terms of increased SC thickness towards normal. In addition to the ablation effect on the SC thickness, CO2 laser also develops thermal injury to the skin, which brings about more severe structural changes in the skin [97]. More recently developed ablative fractional laser demonstrated dramatic skin barrier recovery, that is recovery accomplished within 12–24 h [111]. This happened due to lateral migration of intact cells to the wounded site. In this regard, application of RF technology demonstrated almost complete and natural recovery of the skin in 24 h [86].

However, ablative fractional laser along with other laser techniques may possess harmful effects on the laser-treated skin. For instance, topically applied drugs may permeate across the microchannels created in the skin to reach systemic circulation that may end up with systemic toxicity. Lidocaine and its metabolites were detected in the serum of pig when pig skin model was used [142]. In addition, laser breaks natural skin barrier, allowing pathogen to enter from the skin surface or from non-sterile transdermal preparations directly into interior of the skin. Furthermore, chances of immunological sensitization from some drugs and additives in the formulation possess another safety concern [143]. Therefore, it is of utmost importance to exercise thermal ablation techniques to deliver drugs in well-controlled settings, employing type, duration of application of techniques, and amount of drug suitable for administration.

Conclusion and future perspectives

Presently, the concept in which formulations used to delivery drug across the skin is well-understood and accepted by the general public. In addition, the simplified regulation made it possible to purchase patches like nicotine from pharmacy or supermarket as over-the-counter drugs. The TDD market is growing in a good pace, which has the potential to occupy second place to oral route. According to a report, the TDD market represents multi-billion dollar market annually [144]. The TDD is one such drug administration route which can give return on investment. For instance, TDDS of fentanyl had an annual sales exceeding 1 billion US dollar in the last 5 years.

Despite these, the barrier nature of the SC limits many drugs to be considered for TDD. However, the advancements in enhancing the skin permeability by different technologies made the skin a promising route of drug administration. Particularly, third-generation physical enhancement techniques constitute thermal ablation, laser ablation, and RF-assisted delivery which are capable of delivering macromolecules, vaccines, and peptides by creating microchannels in the SC while protecting underlying tissues. These ablation techniques eliminate pain and inconvenience of injections and limitations caused by other traditional routes of drug delivery.

More precisely, thermal ablation technique is the combination of drug delivery system and device. The latter is to reduce the barrier property of the skin. The combination expected to face more regulatory challenges, but it can open up broader clinical scope. In other words, we can describe the above combination as electronic-based drug delivery system. As per report, it has a small share of the global advanced drug delivery technology market and expected to reach approximately 227 billion US dollar by 2020 [145]. In the present scenario, these systems, i.e. first to third generation of drug delivery systems, has huge market potential due to their advantages such as accurate and specific drug delivery, reduce side effects, and improved medication compliance.

The most recent advancement in the personalized therapy necessitates a paradigm shift in TDD. This is because personalized therapy requires treatment optimization depending on pathophysiological conditions of each individual [146] in order to maximize therapeutic efficacy. This is only possible with the transdermal systems having potential to induce feedback-regulated control release of incorporated drugs. Such needs can only be catered with sensor- and actuator-based wearable devices [147, 148]. Therefore, device-assisted TDDS are containing two parts: TDDS and soft bioelectronics. They control the drug release with simultaneous monitoring of altered physiological states of the individual by the drug. These types of wearable devices are envisaged as fourth-generation transdermal delivery systems. One example is thrombin-responsive microneedle array which is capable of preventing unwanted blood coagulation [149]. In increased glucose responsive delivery of insulin, microneedle array having embedded dual-responsive (hypoxia and H2O2) vehicles is another example [150]. Patient-based TDD is still in the starting stage, which requires much attention in terms of research and development for the convenient management of disease in future.