A single Inertial Measurement Unit on the shank to assess the Shank-to-Vertical Angle.

The Shank-to-Vertical Angle (SVA) is a commonly used parameter to describe orthotic alignment. 3D gait analysis (3DGA) or 2D video analysis are usually used to assess the SVA, but are not always feasible in clinical practice. As an alternative, an Inertial Measurement Unit (IMU) attached and aligned to the shank might be used. This study aimed to investigate the validity, inter-rater reliability and optimal location of a single IMU on the shank to assess the SVA. Thirteen healthy participants (7 m/6f, mean age: 45 ± 18 years) were recorded during quiet standing and barefoot walking using a 3D motion capture system and, simultaneously, with IMUs on the shank. The IMUs were anatomically placed and aligned at two different locations, i.e. anterior, in line with the tibial tuberosity and midline of the ankle (anterior IMU), and lateral, in line with the lateral epicondyle and lateral malleolus (lateral IMU). For each participant, the IMUs were placed by two different researchers. A paired t-test, Bland Altmann analysis (mean difference, repeatability coefficient) and intraclass correlation coefficient (ICC) between the 3DGA and both IMUs, and between raters, was performed. Although validity and reliability of the lateral IMU was low, good validity and inter-rater reliability was found for the anterior IMU (Rater1: mean difference: -0.7 ± 2.1, p = 0.27; ICC = 0.83 and Rater2: mean difference: -0.4 ± 1.9, p = 0.46; ICC = 0.86). Hence, a single IMU placed at the anterior side of the shank is a valid and reliable method to assess the SVA during standing and walking in healthy adults.