Literature DB >> 32635323

The Photoinitiator Lithium Phenyl (2,4,6-Trimethylbenzoyl) Phosphinate with Exposure to 405 nm Light Is Cytotoxic to Mammalian Cells but Not Mutagenic in Bacterial Reverse Mutation Assays.

Alexander K Nguyen1,2, Peter L Goering2, Rosalie K Elespuru2, Srilekha Sarkar Das2, Roger J Narayan1.   

Abstract

Lithium phenyl (2,4,6-trimethylbenzoyl) phosphinate (LAP) is a free radical photo-initiator used to initiate free radical chain polymerization upon light exposure, and is combined with gelatin methacryloyl (GelMA) to produce a photopolymer used in bioprinting. The free radicals produced under bioprinting conditions are potentially cytotoxic and mutagenic. Since these photo-generated free radicals are highly-reactive but short-lived, toxicity assessments should be conducted with light exposure. In this study, photorheology determined that 10 min exposure to 9.6 mW/cm2 405 nm light from an LED light source fully crosslinked 10 wt % GelMA with >3.4 mmol/L LAP, conditions that were used for subsequent cytotoxicity and mutagenicity assessments. These conditions were cytotoxic to M-1 mouse kidney collecting duct cells, a cell type susceptible to lithium toxicity. Exposure to ≤17 mmol/L (0.5 wt %) LAP without light was not cytotoxic; however, concurrent exposure to ≥3.4 mmol/L LAP and light was cytotoxic. No condition of LAP and/or light exposure evaluated was mutagenic in bacterial reverse mutation assays using S. typhimurium strains TA98, TA100 and E. coli WP2 uvrA. These data indicate that the combination of LAP and free radicals generated from photo-excited LAP is cytotoxic, but mutagenicity was not observed in bacteria under typical bioprinting conditions.

Entities:  

Keywords:  bioprinting; cytotoxicity; gelatin methacryloyl; light exposure; lithium phenyl (2,4,6-trimethylbenzoyl) phosphinate; mutagenicity; photoinitiator; photorheology

Year:  2020        PMID: 32635323     DOI: 10.3390/polym12071489

Source DB:  PubMed          Journal:  Polymers (Basel)        ISSN: 2073-4360            Impact factor:   4.329


  2 in total

1.  Improving Printability of Digital-Light-Processing 3D Bioprinting via Photoabsorber Pigment Adjustment.

Authors:  Jeong Wook Seo; Gyu Min Kim; Yejin Choi; Jae Min Cha; Hojae Bae
Journal:  Int J Mol Sci       Date:  2022-05-12       Impact factor: 6.208

2.  Encapsulation of murine hematopoietic stem and progenitor cells in a thiol-crosslinked maleimide-functionalized gelatin hydrogel.

Authors:  Aidan E Gilchrist; Julio F Serrano; Mai T Ngo; Zona Hrnjak; Sanha Kim; Brendan A C Harley
Journal:  Acta Biomater       Date:  2021-06-20       Impact factor: 10.633

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.