Boosting Lithium Storage in Free-Standing Black Phosphorus Anode via Multifunction of Nanocellulose.

Layer-structured black phosphorus (BP) demonstrating high specific capacity has been viewed as a very promising anode material for future high-energy-density Li-ion batteries (LIBs). However, its practical application is hindered by large volume change of BP and poor mechanical stability of BP anodes by traditional slurry casting technology. Here, a free-standing flexible anode composed of BP nanosheets and nanocellulose (NC) nanowires is fabricated via a facile vacuum-assisted filtration approach. The constructed free-standing BP@NC composite anode offers three-dimensional (3D) mixed-conducting network for Li+/e- transports. The substrate of NC film has a certain flexibility up to 10.2% elongation that can restrain the volume change of BP and electrode during operation. In addition, molecular dynamic (MD) simulation and density function theory (DFT) show the greatly enhanced Li+ diffusion in BP@NC composite where the Li ions receive less repulsive force at the interface of BP interlayer and nanocellulose. Benefiting from above multifunction of nanocellulose, the BP@NC composite exhibits high capacities of 1020.1 mAh g-1 at 0.1 A g-1 after 230 cycles and 994.4 mAh g-1 at 0.2 A g-1 after 400 cycles, corresponding to high capacity retentions of 87.1% and 84.9%, respectively. Our results provide a low-cost and effective strategy to develop advanced electrodes for next-generation rechargeable batteries.