Sorption of Sr in granite under typical colloidal action.

The sorption behaviour of Sr into granite was studied with the presence or absence of typical colloids (goethite, bentonite and humic acid). A batch technique was used to analyse the influencing process of colloids and key factors. Moreover, scanning electron microscopy and Fourier transform infrared spectroscopy were used to characterize granite samples before and after the batch experiments. The experiments showed that the presence of colloids promotes the sorption of Sr in the broken granite system; when goethite, bentonite or humic acid (HA) was present, the sorption capacity percentages were 1.8, 2.13 and 1.93 times higher, respectively, than those in the granite only system. As the initial Sr2+ concentration increased, the sorption of Sr increased, but the sorption percentage decreased; the sorption percentage reached a maximum at pH = 7 and decreased as the acidity or alkalinity of the solution increased. The sorption of granite may be related to the interstitial water of the hydroxyl, quartz, and feldspar, the intergranular water of granite groups and the water molecules attached to the granite. Moreover, the surface of the granite sample was rougher after the sorption experiment.