Aligned, high-density semiconducting carbon nanotube arrays for high-performance electronics.

Single-walled carbon nanotubes (CNTs) may enable the fabrication of integrated circuits smaller than 10 nanometers, but this would require scalable production of dense and electronically pure semiconducting nanotube arrays on wafers. We developed a multiple dispersion and sorting process that resulted in extremely high semiconducting purity and a dimension-limited self-alignment (DLSA) procedure for preparing well-aligned CNT arrays (within alignment of 9 degrees) with a tunable density of 100 to 200 CNTs per micrometer on a 10-centimeter silicon wafer. Top-gate field-effect transistors (FETs) fabricated on the CNT array show better performance than that of commercial silicon metal oxide-semiconductor FETs with similar gate length, in particular an on-state current of 1.3 milliamperes per micrometer and a recorded transconductance of 0.9 millisiemens per micrometer for a power supply of 1 volt, while maintaining a low room-temperature subthreshold swing of <90 millivolts per decade using an ionic-liquid gate. Batch-fabricated top-gate five-stage ring oscillators exhibited a highest maximum oscillating frequency of >8 gigahertz.