Optical constants and absorption properties of Te and TeO thin films in the 13-14 nm spectral range.

Undesired mask-induced effects caused by thick absorber layers in EUV photomasks reduce the quality of the projected patterns at the wafer stage in EUV photolithography scanners. New materials with better absorption properties than the state-of-the-art absorbers, TaN and TaBN, are required to mitigate these effects. In this work, we investigated the optical properties (δ and k) of Te and TeO films in the 13-14 nm range, and the absorption properties of these two materials at 13.5 nm. δ and k are obtained through fitting experimental values of reflectivity versus angle of incidence in the EUV range. We follow a methodology which combines different characterization techniques (X-ray reflectivity, EUV reflectivity, and X-ray photoemission spectroscopy) to reduce the number of free parameters in models and hence, increase the reliability of the optical constants obtained. At 13.5 nm, we obtain δ=0.03120, k = 0.07338 for Te, and δ=0.04099, k = 0.06555 for TeO. To experimentally verify the absorption properties of these materials, different thicknesses of Te and TeO films are cast on top of a state-of-the-art mask-quality EUV multilayer with 66.7% reflectivity at 13.5 nm. We found that a reflectivity of ∼0.7% can be attained with either 32.4 nm of Te, or 34.7 nm of TeO, greatly surpassing the absorption properties of TaN and TaBN. The morphology and surface roughness of the Te and TeO films deposited on the multilayer are also investigated.