Modeling and Electrochemical Characterization of Electrodes Based on Epoxy Composite with Functionalized Nanocarbon Fillers at High Concentration.

This paper deals with the electrochemical characterization and the equivalent circuit modeling of screen-printed electrodes, modified by an epoxy composite and loaded with carbon nanotubes (CNTs), pristine and functionalized NH2, and graphene nanoplates (GNPs). The fabrication method is optimized in order to obtain a good dispersion even at high concentration, up to 10%, to increase the range of investigation. Due to the rising presence of filler on the surface, the cyclic voltammetric analysis shows an increasing of (i) electrochemical response and (ii) filler concentration as observed by the scanning electron microscopy (SEM). Epoxy/CNTs-NH2 and epoxy/GNPs, at 10% of concentration, show the best electrochemical behavior. Furthermore, epoxy/CNTs-NH2 show a lower percolation threshold than epoxy/CNT, probably due to the direct bond created by amino groups. Furthermore, the electrochemical impedance spectroscopy (EIS) is used to obtain an electrical equivalent circuit (EEC). The EEC model is a remarkable evolution of previous circuits present in the literature, by inserting an accurate description of the capacitive/inductive/resistive characteristics, thus leading to an enhanced knowledge of phenomena that occur during electrochemical processes.