Received Signal Strength Indicator-Based Indoor Localization Using Distributed Set-Membership Filtering.

Most of the existing localization schemes necessitate a priori statistical characteristic of measurement noise, which may be unrealistic in practical applications. This article addresses the problem of indoor localization by implementing distributed set-membership filtering based on a received signal strength indicator (RSSI) under unknown-but-bounded process and measurement noises. First, the transmit power and the path-loss exponent are estimated by a novel least-squares curve fitting (LSCF) method in RSSI-based localization. Since the localization process of trilateration is susceptible to inaccuracy caused by the noise-affected distance measurements, a convex optimization method is then developed to obtain the state ellipsoid estimation under the unknown-but-bounded noises. Third, a recursive algorithm is established to compute the global ellipsoid that guarantees to locate the true target at every time step. Finally, experimental validation is presented to demonstrate the accuracy and effectiveness of the proposed set-membership filtering method for indoor localization.