Literature DB >> 32298366

Correction: Engineering 3D perovskites for photon interconversion applications.

Sarah Wieghold, Lea Nienhaus.   

Abstract

[This corrects the article DOI: 10.1371/journal.pone.0230299.].

Entities:  

Year:  2020        PMID: 32298366      PMCID: PMC7162476          DOI: 10.1371/journal.pone.0232196

Source DB:  PubMed          Journal:  PLoS One        ISSN: 1932-6203            Impact factor:   3.240


The images for Figs 1, 2 and 3 are incorrectly switched. The image that appears as Fig 1 should be Fig 2, the image that appears as Fig 2 should be Fig 3, and the image that appears as Fig 3 should be Fig 1. The figure captions appear in the correct order. The authors have provided corrected versions here.
Fig 1

3D perovskite-sensitized UC.

Visible-to-ultraviolet UC using CsPbX3 perovskite NCs to sensitize PPO via TTA. Reproduced with permission from Ref. [21]. Copyright 2019, The Chemical Society of Japan (CSJ). Green-to-blue UC using CsPbX3 perovskite NCs to sensitize DPA. Adapted from Ref. [19] with permission from The Royal Society of Chemistry. Near-infrared-to-visible UC using a bulk perovskite film to sensitize rubrene/DBP. Adapted from Ref. [23], Copyright 2019 Elsevier.

Fig 2

a) Schematic of TTA-UC using 3D perovskite NCs. b) Power-dependence of the upconverted emission of DPA/CsPbX3 (X = Br/I) NCs achieving green-to-blue UC with a low efficiency threshold of Ith = 25 mW/cm2. Adapted from Ref. [19] with permission from The Royal Society of Chemistry. c) Power-dependence of the UC emission using PPO/CsPbBr3 NCs exhibiting an efficiency threshold of Ith = 1.9 W/cm2 for visible-to-ultraviolet UC. An UC efficiency above 10% was reported. Adapted with permission from Ref. [20]. Copyright 2019 American Chemical Society. d) TET models via CT-mediated or ‘direct’/virtual CT-mediated TET in NCs. Adapted with permission from Macmillan Publishers Ltd.: Nature Communications from Ref. [43], Copyright 2020.

Fig 3

a) Schematic of photon UC using perovskite bulk films. b), c) Power dependence of the underlying perovskite PL (b) and UC emission (c) for a 100 nm thick perovskite film with a rubrene/DBP layer as upconverted on top. Adapted from Ref. [23], Copyright 2019 Elsevier. d) Band alignment diagram of a perovskite—rubrene interface. Adapted with permission from Ref. [44]. Copyright 2020, American Chemical Society.

3D perovskite-sensitized UC.

Visible-to-ultraviolet UC using CsPbX3 perovskite NCs to sensitize PPO via TTA. Reproduced with permission from Ref. [21]. Copyright 2019, The Chemical Society of Japan (CSJ). Green-to-blue UC using CsPbX3 perovskite NCs to sensitize DPA. Adapted from Ref. [19] with permission from The Royal Society of Chemistry. Near-infrared-to-visible UC using a bulk perovskite film to sensitize rubrene/DBP. Adapted from Ref. [23], Copyright 2019 Elsevier. a) Schematic of TTA-UC using 3D perovskite NCs. b) Power-dependence of the upconverted emission of DPA/CsPbX3 (X = Br/I) NCs achieving green-to-blue UC with a low efficiency threshold of Ith = 25 mW/cm2. Adapted from Ref. [19] with permission from The Royal Society of Chemistry. c) Power-dependence of the UC emission using PPO/CsPbBr3 NCs exhibiting an efficiency threshold of Ith = 1.9 W/cm2 for visible-to-ultraviolet UC. An UC efficiency above 10% was reported. Adapted with permission from Ref. [20]. Copyright 2019 American Chemical Society. d) TET models via CT-mediated or ‘direct’/virtual CT-mediated TET in NCs. Adapted with permission from Macmillan Publishers Ltd.: Nature Communications from Ref. [43], Copyright 2020. a) Schematic of photon UC using perovskite bulk films. b), c) Power dependence of the underlying perovskite PL (b) and UC emission (c) for a 100 nm thick perovskite film with a rubrene/DBP layer as upconverted on top. Adapted from Ref. [23], Copyright 2019 Elsevier. d) Band alignment diagram of a perovskite—rubrene interface. Adapted with permission from Ref. [44]. Copyright 2020, American Chemical Society.
  1 in total

1.  Engineering 3D perovskites for photon interconversion applications.

Authors:  Sarah Wieghold; Lea Nienhaus
Journal:  PLoS One       Date:  2020-03-19       Impact factor: 3.240

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.