Systematic Scoring Balloon Lesion Preparation for Drug-Coated Balloon Angioplasty in Clinical Routine: Results of the PASSWORD Observational Study.

INTRODUCTION: Scoring balloon angioplasty (SBA) for lumen gain prior to stent implantations or drug-coated balloon angioplasty (DCB) is considered an essential interventional tool for lesion preparation. Recent evidence indicates that SBA may play a pivotal role in enhancing the angiographic and clinical outcomes of DCB angioplasty.
METHODS: We studied the systematic use of SBA with a low profile, non-slip element device prior to DCB angioplasty in an unselected, non-randomized patient population. This prospective, all-comers study enrolled patients with de novo lesions as well as in-stent restenotic lesions in bare metal stents (BMS-ISR) and drug-eluting stents (DES-ISR). The primary endpoint was the target lesion failure (TLF) rate at 9 months (ClinicalTrials.gov Identifier NCT02554292).
RESULTS: A total of 481 patients (496 lesions) were recruited to treat de novo lesions (78.4%, 377), BMS-ISR (4.0%, 19), and DES-ISR (17.6%, 85). Overall risk factors were acute coronary syndrome (ACS, 20.6%, 99), diabetes mellitus (46.8%, 225), and atrial fibrillation (8.5%, 41). Average lesion lengths were 16.7 ± 10.4 mm in the de novo group, and 20.1 ± 8.9 mm (BMS-ISR) and 16.2 ± 9.8 mm (DES-ISR) in the ISR groups. Scoring balloon diameters were 2.43 ± 0.41 mm (de novo), 2.71 ± 0.31 mm (BMS-ISR), and 2.92 ± 0.42 mm (DES-ISR) whereas DCB diameters were 2.60 ± 0.39 mm (de novo), 3.00 ± 0.35 mm (BMS-ISR), and 3.10 ± 0.43 mm (DES-ISR), respectively. The overall accumulated TLF rate of 3.0% (14/463) was driven by significantly higher target lesion revascularization rates in the BMS-ISR (5.3%, 1/19) and the DES-ISR group (6.0%, 5/84). In de novo lesions, the TLF rate was 1.1% (4/360) without differences between calcified and non-calcified lesions (p = 0.158) and small vs. large reference vessel diameters with a cutoff value of 3.0 mm (p = 0.901).
CONCLUSIONS: The routine use of a non-slip element scoring balloon catheter to prepare lesions suitable for drug-coated balloon angioplasty is associated with high procedural success rates and low TLF rates in de novo lesions.

Key Summary Points

Introduction

Since the early days of percutaneous coronary interventions (PCI) the complexity of treated lesions has steadily increased. In parallel, the number of interventional tools to improve the procedural success rate has also expanded, leaving the interventionalist with a large array of options. A special focus is currently paid to lesion preparation, partly because heavily calcified and fibrotic lesions, which are not very amenable for sufficient luminal gain, continue to present an important challenge in coronary interventions.

In this context, a minimalistic approach appears to be especially intriguing. The concept of lesion preparation in challenging situations for subsequent stent implantation is not new and was even introduced prior to the stent era. Mauri et al. [1] reported the results from a randomized controlled trial comparing plain old balloon angioplasty (POBA) and cutting balloon angioplasty (CBA). They found that there were no angiographic improvements in the lesions treated with CBA as compared to POBA and concluded that CBA should be reserved for more complex lesion morphologies. Danek et al. [2] conducted a study-level meta-analysis by comparing available lesion modification strategies, which were CBA, scoring balloon angioplasty (SBA), and rotational and orbital atherectomy. They reported improved long-term outcomes in pre-stenting lesion modification as compared to balloon pre-dilatation or no pre-dilatation at all. This advantage, however, could only be observed in pooled data from randomized controlled trials.

Whereas the lesion modification strategies mentioned above were primarily studied in the context of luminal gain prior to stent implantation [3], renewed interest has been generated with the introduction of drug-coated balloon (DCB) angioplasty. Lumen gain prior to DCB angioplasty may be of paramount importance in the absence of stent or scaffold implantations due to elastic recoil and/or dissections. However, pivotal studies for DCB angioplasty were primarily conducted to treat in-stent restenotic (ISR) lesions with documented high restenosis [4]. Numerous studies provided sufficient evidence for a renewed class I recommendation by the European Society of Cardiology for in-stent restenosis with an evidence level A [5].

While initially safety and efficacy studies focused on ISR, de novo lesions were studied with paclitaxel-eluting stents as comparators. The BELLO study [6] randomized DCB and drug-eluting stents (DES) with paclitaxel coating to treat small-vessel de novo lesions. They found that late lumen loss was lower in the DCB group as compared to DES while the binary restenosis and revascularization rates were similar in both groups. Moreover, the clinical endpoint-powered BASKET SMALL II trial in small vessel de novo lesions [7] revealed comparable outcomes for DCB angioplasty and newer-generation DES. This growing clinical evidence supports the intuitive attractiveness of DCB angioplasty with its obvious benefit of avoiding coronary foreign body implants. The latter may also help to rationalize a shortened dual antiplatelet therapy (DAPT), in particular for elective patients with de novo lesions.

The existing body of evidence for the combination of CBA/SBA and DCB angioplasty, with the intention to avoid bailout stenting, was derived from heterogeneous clinical data. Previous study designs entailed either the use of different DCB devices [8] following lesion preparation with the same scoring balloon or different lesion preparation strategies [9] for one particular DCB device. Therefore, we set out to study the routine combination of a low-profile SBA with non-slip nylon elements [9, 10] and clinically proven iopromide–paclitaxel balloon angioplasty [11-14] in an unselected patient population with a focus on de novo coronary lesions.

Methods

Study Design and Population

The PASSWORD study (Post MArket Surveillance of SeQuent Please NEO With ScORing Blesion Preparation in Real WorlD Patients) is a prospective, multicenter, single-armed study with the aim to document the safety and efficacy of a pre-specified SBA technology for routine lesion preparation in combination with iopromide–paclitaxel-coated balloon angioplasty (Paccocath® technology). The combination of the SBA/DCB lesion treatment strategy was intended to treat either in-stent restenosis of bare metal stents (BMS-ISR) or drug-eluting stents (DES-ISR) or de novo lesions with reference diameters between at least 2.5 mm and at most 4.0 mm and no greater than 30 mm in lesion length.

The main objective of the PASSWORD study was to assess the clinical suitability in terms of vessel patency and procedural success of the aforementioned combination treatment with a focus on stent-free de novo lesion treatment (ClinicalTrials.gov Identifier NCT02554292).

Endpoints

The primary endpoint was the rate of clinically driven target lesion failure (TLF) consisting of the rates for target lesion revascularization (TLR), myocardial infarction (MI), or cardiac death at 9 months. Cardiac death was defined as the cumulative rates of intra-hospital death of cardiac origin and all-cause death during follow-up.

TLR is defined as any repeat percutaneous intervention of the target lesion or bypass surgery of the target vessel performed for restenosis or other complication of the target lesion. Criteria for MI (intra-hospital and cumulative) were (a) the twofold increase of the upper normal value with significant proportion of creatine kinase (CK-MB), (b) the rise or fall in cardiac troponin (cTr) concentration with at least one value above the 99th percentile upper reference limit, or (c) greater than 20% rise in cTr [15]. As a result of the adherence to local clinical routines, electrocardiograms or cardiac enzymes were recommended prior to the intervention and before hospital discharge according to the aforementioned MI definition [15] and institutional guidelines of each participating center.

Secondary endpoints entailed the technical success rate to cross the target lesion and the individual rates for MI, TLR, cardiac mortality (in-hospital), and all-cause mortality (cumulated) in subgroups of de novo lesions, DES-ISR and BMS-ISR.

Interventional Procedure

The treatment recommendations of the German Consensus Group [16] for lesion preparation and DCB angioplasty were the basis for this study. All lesions were pre-dilated with the same type of SBA defined in this study with a balloon-to-vessel ratio of 0.8–1.0. Subsequent DCB angioplasty was only conducted in the absence of a major, flow-limiting dissection, i.e., less severe than type C–F according to the National Heart, Lung, and Blood Institute (NHLBI) classification and severe recoil at least 30% of vessel diameter. An inflation time of at least 30 s at nominal pressures was recommended for DCB angioplasty whereas bailout stenting was permissible if severe dissections or residual diameter stenosis greater than 30% occurred. Angiographic parameters were assessed and analyzed by clinical sites and the additional use of imaging modalities such as optical coherence tomography or intravascular ultrasound was left to the investigator according to his/her institutional guidelines.

Statistics

The χ2 test or the Fisher’s exact test was used to detect differences between lesion subgroups when dichotomous variables were compared. The one-way analysis of variance was applied for continuous variables. As a result of the intended mélange of target lesions to be treated, a conservative TLF rate of 15.5% [17] was used as a reference while a TLF rate of 10.5% was assumed in the treatment group. On the basis of these rates, an alpha of 5%, power of 80%, and the null hypothesis H0: TLFDCB+SBA ≥ TLFhistoric, the sample size was estimated at 375 patients plus 20% to account for patients lost to follow-up. Hence, 450 patients were required. For all tests the significance level α was 0.05. SPSS version 24.0 (IBM, Munich, Germany) was used for all analyses while the sample size was calculated with nQuery/nTerim Advisor, version 2.0 (Statistical Solutions Ltd. Cork, Ireland).

Device Characteristics

The scoring balloon used for lesion preparation (Fig. 1) consists of three non-slip scoring elements with triangular cross sections (Lacrosse NSE Nipro/Goodman, Nagoya, Japan/NSE Alpha B.Braun Melsungen AG, Germany). The device was used in one length only (13 mm). Balloon diameters were available from 2.00 to 4.00 mm. Calcified lesion modification with this device, as measured by optical coherence tomography, was favorably rated in previous observational studies [18]. Given the fact that there is no class effect for DCB devices [4] the iopromide–paclitaxel-coated DCB was used (SeQuent® Please NEO, B.Braun Melsungen AG). As compared to the predecessor device (SeQuent® Please, B.Braun Melsungen AG), a hydrophilic coating of the distal shaft was introduced for enhanced lesion crossability.

Fig. 1

Scoring balloon catheter with three nylon elements having a triangular cross section of height 0.39 mm, bonded distally and proximally of the balloon (left panel, courtesy Nipro Corporation, Japan). When the balloon is inflated, the three non-slip elements are positioned on the cylindrical surface of the balloon spaced with 120° from each other (right panel)

Co-medication

Provided that patients were suitable for PCI, acetylsalicylic acid (ASA) 75–325 mg/day was recommended life-long. A clopidogrel loading dose of at least 600 mg, ASA 100 mg/day orally 2 days pre intervention or 500 mg ASA i.v. were recommended prior to the procedure. Alternative antiplatelet aggregation agents such as ticagrelor or prasugrel were also permissible at the discretion of the investigator. Intravenously administered heparin (70 IU/kg) or 5000 IU was recommended and adjusted when required according to each institution’s guidelines.

Data Collection

An established electronic data capture system [11-14] was utilized to document baseline and follow-up data (www.studiesportal.com). The respective national principal investigators ensured the accuracy of the datasets whenever system integrated plausibility checks revealed inaccuracies, which initiated source data verification in the affected centers.

Compliance with Ethics Guidelines

The lead ethics committee of the coordinating investigator (Landesärztekammer Brandenburg No. AS 130/2015) first approved this study. Subsequently, pertinent ethics committees of all participating cardiac centers approved the study prior to patient recruitment. The declaration of Helsinki in its most recent form was the basis for this trial. Patients were informed and consented prior to enrollment.

Results

Patient Demographics

A total of 481 patients were recruited for treatment of de novo lesions (78.4%, 377), BMS-ISR (4.0%, 19), and DES-ISR (17.6%, 85). Overall risk factors were acute coronary syndrome (ACS, 20.6%, 99), diabetes mellitus (46.8%, 225), and atrial fibrillation (8.5%, 41) (Table 1).

Table 1

Patient demographics

Variable	All	De novo	BMS-ISR	DES-ISR	p value
Number of patients	481 (100%)	377 (78.4%)	19 (4.0%)	85 (17.6%)	–
Number of lesions	496	386	19	91	–
Age (years)a	64.1 ± 11.4	62.8 ± 11.2	72.4 ± 10.9	68.1 ± 10.8	< 0.001
Male gender	362 (75.3%)	289 (76.7)	16 (84.2%)	57 (67.1%)	0.117
Diabetes	225 (46.8%)	167 (44.3%)	11 (57.9%)	47 (55.3%)	0.114
Hypertension	394 (81.9%)	302 (80.1%)	18 (94.7%)	74 (87.1%)	0.108
Hyperlipidemia	412 (85.7%)	317 (84.1%)	16 (84.2%)	79 (92.9%)	0.107
History of smoking	257 (53.4%)	208 (55.2%)	9 (47.4%)	40 (47.1%)	0.345
Renal insufficiency	116 (24.1%)	90 (23.9%)	7 (36.8%)	19 (22.4%)	0.399
Dialysis	9 (1.9%)	6 (1.6%)	1 (5.3%)	2 (2.4%)	0.482
unstable angina	112 (23.3%)	86 (22.8%)	3 (15.8%)	23 (27.1%)	0.516
AF
Paroxysmal	22 (4.6%)	19 (5.0%)	1 (5.3%)	2 (2.4%)	0.466
Persistent	6 (1.2%)	5 (1.3%)	0 (0.0%)	1 (1.2%)
Long standing/persistent	1 (0.2%)	1 (0.3%)	0 (0.0%)	0 (0.0%)
Permanent	12 (2.5%)	7 (1.9%)	2 (10.5%)	3 (3.5%)
No AF	440 (91.5%)	345 (91.5%)	17 (84.2%)	78 (92.9%)
ACS	99 (20.6%)	77 (20.4%)	6 (31.6%)	16 (18.8%)	0.456
STEMI	20 (4.2%)	19 (5.0%)	1 (5.3%)	0 (0.0%)	0.161
NSTEMI	79 (16.4%)	58 (15.4%)	5 (26.3%)	17 (18.7%)	0.161

ACS acute coronary syndrome, AF atrial fibrillation, BMS-ISR in-stent restenotic lesions in bare metal stents, DES-ISR in-stent restenotic lesions in drug-eluting stents, NSTEMI non-ST-elevation myocardial infarction, STEMI ST-elevation myocardial infarction

aSingle-factor ANOVA, otherwise χ2 or Fisher’s exact test whenever applicable

Lesion Characteristics and Procedures

The target vessel distribution (Table 2) between the three patient groups was not different (p = 0.492). Predominantly de novo lesions (77.8%) followed by DES-ISR (18.4%) were treated.

Table 2

Lesion characteristics

Variable	All	De novo	BMS-ISR	DES-ISR	p value
Number of lesions	496 (100%)	386 (77.8%)	19 (3.8%)	91 (18.4%)	–
Target vessel
LAD	255 (51.4%)	192 (49.7%)	14 (70.0%)	49 (53.8%)	0.492
CX	111 (22.4%)	89 (23.1%)	2 (10.5%)	20 (22.0%)
RCA	116 (23.4%)	95 (24.6%)	3 (15.8%)	18 (20.0%)
Graft	6 (1.2%)	3 (0.8%)	0 (0.0%)	3 (3.3%)
Ramus intermedius	7 (1.4%)	6 (1.6%)	0 (0.0%)	1 (1.1%)
Unknown	1 (0.2%)	1 (0.3%)	0 (0.0%)	0 (0.0%)
Total occlusion	25 (5.0%)	19 (4.9%)	4 (21.1%)	2 (2.2%)	0.003
Chronic total occlusion	15 (3.0%)	13 (3.4%)	1 (5.3%)	1 (1.1%)	0.443
Thrombus burden	7 (1.4%)	5 (1.3%)	1 (5.3%)	1 (1.1%)	0.345
Diffuse vessel disease	181 (36.5%)	157 (40.7%)	5 (26.3%)	19 (20.9%)	0.001
Calcification	168 (33.9%)	128 (33.2%)	10 (52.6%)	30 (33.0%)	0.212
Ostial lesion	67 (13.5%)	52 (13.5%)	1 (5.3%)	14 (15.4%)	0.502
Bifurcation lesion	105 (21.2%)	101 (26.2%)	1 (5.3%)	3 (3.3%)	< 0.001
Severe tortuosity	28 (5.6%)	26 (6.7%)	0 (0.0%)	2 (2.2%)	0.133
AHA/ACC type B2/C lesion	180 (36.3%)	130 (33.7%)	13 (66.8%)	37 (40.7%)	0.006
Number of diseased vessels
Single	171 (35.6%)	120 (31.1%)	4 (21.1%)	52 (57.1%)	< 0.001
Double	216 (44.9%)	193 (50.0%)	7 (36.8%)	22 (24.2%)
Triple	94 (19.5%)	73 (18.9%)	9 (42.1%)	17 (18.7%)
Reference diameter (mm)a	2.74 ± 0.44	2.63 ± 0.37	3.05 ± 0.29	3.15 ± 0.42	< 0.001
Lesion lengtha	16.8 ± 10.2	16.7 ± 10.4	20.1 ± 8.9	16.2 ± 9.8	0.320
Degree of stenosis (%)a	84.9 ± 10.0	85.1 ± 9.9	83.2 ± 9.9	84.5 ± 9.9	0.630
TIMI flow prior to intervention
0	25 (5.0%)	18 (4.7%)	4 21.1%)	3 (3.3%)	0.005
1	16 (3.2%)	15 (3.9%)	0 (0.0%)	1 (1.1%)
2	168 (33.9%)	140 (36.3%)	3 (15.8%)	25 (27.5%)
3	287 (57.9%)	213 (55.2%)	12 (63.1%)	62 (68.1%)

AHA/ACC American College of Cardiology/American Heart Association, BMS-ISR in-stent restenotic lesions in bare metal stents, CX left circumflex artery, DES-ISR in-stent restenotic lesions in drug-eluting stents, LAD left anterior descending, RCA right coronary artery, TIMI thrombolysis in myocardial infarction

aSingle-factor ANOVA, otherwise χ2 or Fisher’s Exact Test whenever applicable

Average lesion lengths were 16.7 ± 10.4 mm in the de novo group and 20.1 ± 8.9 mm (BMS-ISR) and 16.2 ± 9.8 mm (DES-ISR) for the ISR groups. Bailout stenting in target lesions was done in 1.3% (5/386) of the de novo lesion subgroup.

Details on scoring balloon dimensions and DCB catheters characteristics are detailed in Table 3.

Table 3

Procedural data and device characteristics

Variable	All	De novo	BMS-ISR	DES-ISR	p value
Number of lesions	496	386	19	91	–
DCBs used	528	410	21	97	–
Predilatation with scoring balloon	496 (100%)	386 (100%)	19 (100%)	91 (100%)	–
Scoring balloon diameter (mm)a	2.53 ± 0.45	2.43 ± 0.41	2.71 ± 0.31	2.92 ± 0.42	< 0.001
Predilatation scoring balloon pressure (atm)a	11.6 ± 3.3	11.0 ± 3.0	15.4 ± 3.9	13.4 ± 3.1	< 0.001
DCB diameter (mm)a	2.71 ± 0.45	2.60 ± 0.39	3.00 ± 0.35	3.10 ± 0.43	< 0.001
DCB length (mm)a	24.1 ± 7.1	24.4 ± 7.0	22.7 ± 7.0	22.7 ± 7.0	0.070
DCB inflation pressure (atm)a	9.4 ± 3.2	8.7 ± 2.6	12.9 ± 4.3	11.5 ± 3.9	< 0.001
Bailout stenting in target lesion	1.2% (6/496)	1.3% (5/386)	5.3% (1/19)	0.0% (0/91)	0.153
Additional DES in non-target lesions	9 (1.9%)	6 (1.6%)	1 (5.3%)	2 (2.4%)	0.482
Overall technical success per patient	480 (99.8%)	376 (99.7%)	19 (100.0%)	85 (100.0%)	0.871
Multi-vessel PCI	184 (38.3%)	165 (43.8%)	8 (42.1%)	11 (12.9%)	< 0.001
Additional non-target lesions treated	0.6 ± 0.9	0.8 ± 1.0	0.7 ± 0.2	0.5 ± 0.1	< 0.001
Type of DES-ISR					–
PES-ISR	1 (0.9%)	0 (0.0%)	0 (0.0%)	1 (1.1%)
SES-ISR	9 (8.2%)	0 (0.0%)	0 (0.0%)	9 (9.9%)
ZES-ISR	14 (12.7%)	0 (0.0%)	0 (0.0%)	14 (15.4%)
BES-ISR	4 (3.6%)	0 (0.0%)	0 (0.0%)	4 (4.4%)
EES-ISR	37 (33.6%)	0 (0.0%)	0 (0.0%)	37 (40.7%)
Biomatrix-ISR	11 (10.0%)	0 (0.0%)	0 (0.0%)	11 (12.1%)
PF-SES-ISR	5 (4.5%)	0 (0.0%)	0 (0.0%)	5 (5.5%)
Absorb-ISR	1 (0.9%)	0 (0.0%)	0 (0.0%)	1 (1.1%)
Other DES-ISR	7 (6.4%)	0 (0.0%)	0 (0.0%)	7 (7.7%)
Type of BMS-ISR
CoCr-ISR	6 (5.5%)	0 (0.0%)	6 (31.1%)	0 (0.0%)
CrCo-ISR	4 (3.6%)	0 (0.0%)	4 (21.1%)	0 (0.0%)
Stainless steel ISR	4 (3.6%)	0 (0.0%)	2 (10.5%)	2 (2.2%)
Other BMS-ISR	7 (6.4%)	0 (0.0%)	7 (36.8%)	0 (0.0%)
Time since stenting, monthsa	45.5 ± 53.5	–	127.1 ± 60.3	26.7 ± 28.4	< 0.001

BMS bare metal stents, DCB drug-coated balloon, DES drug-eluting stent, EES everolimus-eluting stents, ISR in-stent restenosis, PCI percutaneous coronary intervention, PES paclitaxel-eluting stent, PF polymer-free, SES sirolimus-eluting stent, ZES zotarolimus-eluting stent

aSingle-factor ANOVA, otherwise χ2 or Fisher’s exact test whenever applicable

DCB and Lesion Lengths

On average, DCB balloon lengths were approximately 7.7 mm longer than the corresponding lesion lengths as compared to the 2.6 mm difference for BMS-ISR and the 6.5 mm difference for DES-ISR lesions. Sixty-five DCB catheters were of 35 or 40 mm length. These were used to treat long lesions (33.4 ± 18.1 mm) whereas shorter DCBs (≤ 30 mm) were preferred for lesion lengths of 15.5 ± 8.5 mm.

The overall technical success rate to prepare the lesion with SBA and subsequent DCB angioplasty was high (99.8%, 480/496).

Regarding the post-procedural dual-antiplatelet therapy (Table 4), clopidogrel was most frequently used (70.9%, 341/481) followed by ticagrelor (17.0%, 82/481) and prasugrel (11.6%, 56/481). In stable coronary artery disease patients who did not receive bailout stents and/or did not have a remaining DAPT mandated by prior DES implantation, the DAPT duration was 4 weeks.

Table 4

Peri-procedural drug therapy

Drug type		Drug	All	De novo	BMS-ISR	DES-ISR	p value
Patients			481	377	19	85	–
Pre PCI	APT	600 mg clopidogrel	195 (40.5%)	158 (41.9%)	6 (31.6%)	31 (36.5%)	< 0.001
		300 mg clopidogrel	46 (9.6%)	36 (9.5%)	2 (10.5%)	8 (9.4%)
		75 mg clopidgrel	36 (7.5%)	30 (8.0%)	2 (10.5%)	4 (4.7%)
		ASA only	60 (12.5%)	34 (9.0%)	7 (36.8%)	19 (22.4%)
		180 mg ticagrelor	61 (12.7%)	50 (13.3%)	0 (0.0%)	11 (12.9%)
		90 mg ticagrelor	1 (0.2%)	0 (0.0%)	1 (5.3%)	0 (0.0%)
		60 mg prasugrel	45 (9.4%)	41 (10.9%)	1 (5.3%)	3 (3.5%)
		10 mg prasugrel	5 (1.0%)	5 (1.3%)	0 (0.0%)	0 (0.0%)
		no preloading	32 (6.7%)	23 (6.1%)	0 (0.0%)	9 (10.6%)
Post PCI	APT	Clopidogrel	341 (70.9%)	268 (71.1%)	16 (84.2%)	57 (67.1%)	0.087
		Ticagrelor	82 (17.0%)	58 (15.4%)	2 (10.5%)	22 (25.9%)
		Prasugrel	56 (11.6%)	50 (13.3%)	1 (5.3%)	5 (5.9%)
		Other	2 (0.4%)	1 (0.3%)	0 (0.0%)	1 (1.1%)
Triple therapy		DAPT + vitamin K antagonist or NOAC	7 (1.5%)	6 (1.6%)	0 (0.0%)	1 (1.2%)	0.829

APT antiplatelet therapy, ASA acetylsalicylic acid, BMS bare metal stent, DAPT dual antiplatelet therapy, DES drug-eluting stent, ISR in-stent restenosis, NOAC non-vitamin K oral anticoagulant, PCI percutaneous coronary intervention

Clinical Outcomes

The follow-up rate relative to the primary endpoint was 96.3% (463/491) (Table 5). The overall accumulated TLF rate was 3.0% (14/463) mostly driven by significantly higher target lesion revascularization rates in the BMS-ISR (5.3%, 1/19) and the DES-ISR group (6.0%, 5/84). The Kaplan–Meier analysis (Fig. 2) revealed significant differences in TLF (log rank p < 0.001). There were no in-hospital events in any of the three patient subgroups. The accumulated TLF rates were significantly higher in the DES-ISR and the BMS-ISR groups as compared to the de novo subgroup (p < 0.001). Moreover, there was a considerable number of non-target vessel revascularizations (nTVR) in the overall cohort (2.2%, 10/463). A subgroup analysis in patients treated for de novo lesions revealed that the TLF rates were 1.3% (4/313) in lesions treated with balloon lengths of at most 30 mm and 0.0% (0/46) in patients with balloon lengths greater than 30 mm.

Table 5

Clinical outcomes

Variable	All	De novo	BMS-ISR	DES-ISR	p value
Number of patients	481	377	19	85	–
Patients with clinical follow-up	463 (96.3%)	360 (95.5%)	19 (100.0%)	84 (98.8%)	0.234
Time to discharge, days	2.2 ± 5.9	2.0 ± 6.3	6.0 ± 7.7	2.0 ± 2.1	0.016
Follow-up time (months)a	9.4 ± 2.9	9.5 ± 2.9	9.2 ± 0.6	9.3 ± 3.2	0.831
In hospital TLF	0 (0.0%)	0 (0.0%)	0 (0.0%)	0 (0.0%)	–
In hospital Re-PTCA	0 (0.0%)	0 (0.0%)	0 (0.0%)	0 (0.0%)	–
In hospital CABG	0 (0.0%)	0 (0.0%)	0 (0.0%)	0 (0.0%)	–
In hospital MI	0 (0.0%)	0 (0.0%)	0 (0.0%)	0 (0.0%)	–
In hospital cardiac death	0 (0.0%)	0 (0.0%)	0 (0.0%)	0 (0.0%)	–
Accumulated TLF	14 (3.0%)	4 (1.1%)	2 (10.5%)	8 (9.5%)	< 0.001
Accumulated TLR	9 (1.9%)	3 (0.8%)	1 (5.3%)	5 (6.0%)	0.005
Accumulated Re-PTCA	9 (1.9%)	3 (0.8%)	1 (5.3%)	5 (6.0%)	0.005
Accumulated CABG	1 (0.2%)	0 (0.0%)	0 (0.0%)	1 (1.2%)	0.104
Accumulated MI	2 (0.4%)	0 (0.0%)	0 (0.0%)	2 (2.4%)	0.011
Accumulated cardiac death	4 (0.9%)	1 (0.3%)	1 (5.3%)	2 (2.4%)	0.018
Accumulated TVR	11 (2.4%)	4 (1.1%)	1 (5.3%)	6 (7.1%)	0.003
Accumulated non-target vessel revascularization	10 (2.2%)	5 (1.4%)	2 (10.5%)	3 (3.6%)	0.017
Accumulated vessel thrombosis	1 (0.2%)	1 (0.3%)	0 (0.0%)	0 (0.0%)	0.866

BMS bare metal stent, CABG coronary artery bypass graft, DES drug-eluting stent, ISR in-stent restenosis, MI myocardial infarction, PTCA percutaneous transluminal coronary angioplasty, TLF target lesion failure, TVR target vessel revascularization

aSingle-factor ANOVA, otherwise χ2 or Fisher’s exact test whenever applicable

Fig. 2

Kaplan–Meier analysis for freedom from target lesion failure (TLF) with significant differences between lesion groups (log rank p < 0.001)

De Novo Subgroup

There were 119 patients with calcified de novo lesions and 241 patients without evidence of vessel calcification. Between these two groups, there were no differences in the TLF rates (calcified lesions 0.0%; 0/119 vs. non-calcified lesions 1.7%; 4/237, p = 0.158). Likewise, there was no difference in TLF in lesions with reference diameters less than 3.0 mm and 3.0 mm or larger (1.2%; 3/260 vs. 1.0%; 1/100, p = 0.901).

Discussion

Primary Endpoint

The main angiographic benefit of stent implantations is the immediate luminal gain, which represents an instant gratification for the interventionalist. For the same reason, stent-free, DCB angioplasty does not provide stent-like results. Lesion preparation with SBA resulting in controlled dissections for luminal gain potentially enhances drug uptake in the vascular wall, albeit these data are currently not available. Within the framework of observational statistics, the results of our medium-sized cohort study are promising with low TLF rates in the de novo lesion group. The clinical outcomes compare well with prior studies in unselected patient populations. Wöhrle et al. [13] reported 9-month MACE rates in the 2.4–2.6% range, which is in agreement with our rate of less than 2.0%. The small vessel observational study by Zeymer and co-workers [14] revealed an accumulated MACE rate of 4.3%. However, one needs to bear in mind that the purpose of this study was observational in nature and event underreporting may have occurred.

Lesion Preparation and Plaque Modification

Coronary lesions are usually associated with atherosclerotic plaques, which are frequently eccentric and heterogeneous in nature [19]. Unfortunately, plaque vulnerability, i.e., its potential to release the contents of encapsulated thrombogenic material, cannot be determined from fluoroscopic images [20]. However, a controlled plaque modification, i.e., a defined dissection mediated by the three nylon elements (Fig. 1) could be an option to obtain sufficient lumen gain and to reduce the risk of a post-procedural uncontrolled plaque rupture. Given the heterogeneity of the diseased coronary wall, it seems intuitive to use a mechanical cutting or scoring of this heterogeneous wall instead of a volumetric plaque displacement following balloon dilatation. Tzafriri et al. [21] studied local drug delivery after mechanical plaque modification in explanted human arteries. In calcified lower limb arteries, it was found that orbital atherectomy enhanced paclitaxel absorption and distribution in an ex vivo experimental setup. Despite the differences with atherectomy the non-slip nylon elements of SBA leading to an effective “cracking” in the vessel wall might have a similar effect to enhance drug transfer to the target cells. This combination of an improved acute lumen gain through SBA plus “paving the way” for local drug delivery through DCB angioplasty could explain the beneficial results of this single-arm registry.

Bailout Stenting and Technical Success Rates

It is noteworthy that bailout stenting was necessary in only 1.3% of de novo lesions. Only five lesions had dissections, which required extra intravascular scaffolding. An important finding in earlier studies is that despite the lower lumen gain at baseline, DCB angioplasty was shown to be associated with low TLR rates. If stents can be avoided, lumen enlargement over time, i.e., positive remodeling is possible [22]. DES even with latest-generation BMS backbones have stent thrombosis rates in the 0.9–1.9% range [23]. In our cohort, we recorded one vessel thrombosis, which did not occur in the target lesion.

In the de novo lesion group, key lesion morphological attributes were challenging with 33.2% calcification, 33.7% B2/C lesions, and 2.63 ± 0.37 mm vessel diameters. Nevertheless, the technical success rate was 99.7% which is in agreement with the corresponding success rates of 99.2% from the Rosenberg registry [11, 12] and success rates from other registries ranging from 96.9% [13] to 98.9% [14].

Scoring Before Drug Delivery

There remains to be some debate whether a drug-coated scoring balloon may provide benefits relative to procedural and clinical outcomes. It is our conviction that scoring balloons ought to be the first step to check the feasibility of DCB angioplasty. In case of severe dissections, drug-coated SBA do not seem intuitive because of a potential “overmedication” in the target lesion, given the subsequent implantation of a DES.

Final Remarks

Based on the consensus group recommendations [16] for pre-dilating lesions prior to DCB angioplasty, the balloon-to-vessel ratio was defined in the range of 0.8–1.0. Even though it seems intuitive to reduce vessel segment trauma by not extending this ratio beyond 1.0, scientific evidence for this “sweet spot” is rooted in the early angioplasty work by Nichols et al. [24]. They found that the optimal balloon size in the beginning of balloon angioplasty in the range of 0.9–1.3 revealed the most favorable combination of minimal dissection risk and highest vessel patency. The very recent recommendations from the Asia–Pacific consensus group [25] engulfed two new aspects of lesion preparation and DCB angioplasty. Firstly, the authors found enough evidence to recommend DCB angioplasty also for de novo lesions in larger vessels supported by diagnostic techniques such as fractional flow reserve or optical coherence tomography. Secondly, another factor potentially contributing to vessel patency was introduced. The use of high dose statin [26] may significantly reduce plaque burden, thereby increasing coronary blood flow in the long term. One the other side, high dose statins may also modify plaque composition to render them more benign with less embolic potential.

Limitations

The dramatically changed regulatory environment requires real-world data in unselected patient populations with inherent data granularity. Despite the fact that our follow-up rate is high at greater than 95.0%, event underreporting still remains a concern. However, event reporting by clinical sites was partly done via electronic health records, thereby reducing the likelihood of underreporting. Not all patients are suitable for DCB angioplasty and all efforts were made to reduce the selection bias. Nevertheless, only patients with successful lesion preparation following SBA angioplasty were subsequently treated with DCB angioplasty. Moreover, there is a significant learning curve and one has to assume that the procedural skills from study centers are not easily transferable to other cardiac centers. Despite the generally accepted recommendation for endpoint definition [27], we used the cumulative mortality rate instead of the cumulative cardiac death rate to pay tribute to the observational, clinical routine setting of this study which was mandated by regulatory agencies. A control angiography would have to be mandatory to meet this criterion. This type of follow-up, however, was outside of the scope of this clinical study.

Conclusions

Lesion preparation with SBA for DCB angioplasty is associated with low clinical event rates in particular for de novo lesions without additional stents. Our data suggest that especially patients undergoing stent-free DCB angioplasty may benefit the most from SBA-mediated plaque modification.

Why carry out this study?

Scoring balloon angioplasty (SBA) for acute lumen gain is an interventional tool for lesion preparation

Non-slip element scoring balloon catheter may be associated with enhanced lesion crossability

Drug-coated balloon (DCB) angioplasty was recently studied in small vessel de novo artery disease in the BASKET-SMALL II trial

What was learned from the study?

The combination of non-slip element scoring balloon catheter and DCB was safe and effective in the treatment of de novo coronary artery disease with target lesion failure rates of less than 2% at 9 months

There are no de novo subgroups, e.g., calcified lesions, larger vessels (≥ 3mm) which do not benefit from SBA/DCB treatment