Transition from purely elastic to viscoelastic behavior of silica optical fibers at high temperatures characterized using regenerated Bragg gratings.

In this study, the response of regenerated fiber Bragg gratings (RFGBs) to axial forces was investigated in a temperature range from room temperature to 900 °C. For the first time, the transition from pure elastic to viscoelastic behavior around 700 °C of a standard SMF28 optical fiber was measured with an inscribed RFBG. An elastic model with linear temperature dependencies of Young's modulus and Poisson's ratio was established, and showed good agreement with the measurements up to temperatures of ∼500 °C. In the temperature range up to 900 °C, the RFBG response could be well described with a simple, single-material approach and a Burgers model that consists of a Kelvin and a Maxwell part. Based on the elastic parameter of the Maxwell part, the temperature-dependent force sensitivity of the RFBG was determined, and it showed a linear decrease in the range from room temperature to ∼500 °C, constant values in the range between ∼500 °C and ∼600 °C, and a strong increase at higher temperatures. While fulfilling the condition to operate in the elastic domain of the silica fiber, the investigations demonstrate that RFBGs can be used as force sensors up to temperatures of ∼600 °C - the range in which temperature-dependent force sensitivities have to be considered. The temperature-dependent parameters of the effective single-material model (elastic and viscoelastic part) are essential to describe the effective mechanical behavior of the optical fiber at high temperatures.