A Hanafi1, D Donnermeyer2, E Schäfer3, S Bürklein3. 1. Private Office, Gelsenkirchen, Germany. 2. Department of Periodontology and Operative Dentistry, University of Münster, Münster, Germany. 3. Central Interdisciplinary Ambulance in the School of Dentistry, University of Münster, Münster, Germany.
Abstract
AIM: To evaluate a modular 3D print training dental model with embedded human teeth and electronic working length determination for undergraduate endodontic education. METHODOLOGY: Cone-beam volume tomography data of a human skull were transferred into stereolithographic (STL) data, and a customizable modular 3D print model with individually removable sextants and teeth was generated for the use in commercially available phantom heads. Each of sixty-eight students performed a complete root canal treatment on an extracted human tooth. Working lengths were determined with electronic apex locators (EAL) and verified radiographically. Subsequently, an evaluation was carried out with regard to the difficulty of the working steps access cavity preparation, working length determination, root canal preparation/irrigation and canal filling, and these steps were compared to commonly used benchtop models. Additionally, the agreement of electronic and radiographic working length determination was assessed and analysed statistically with the chi-square test. RESULTS: A total of 68 teeth (20 incisors, 26 premolars and 22 molars) with 127 root canals were treated. In total, 87% of the students considered the modular 3D print model considerably more demanding than the conventional benchtop model. Overall, 96% felt better prepared for the clinical situation, 92% felt markedly reduced stress levels during endodontic practice in the subsequent clinical courses, and 93% of the students suggested the model should be used in future preclinical endodontic training. The preradiographic use of EAL resulted in 85% of the cases having radiographically acceptable working length determination within 0-2 mm from the radiographic apex. Readings more than 2 mm from the apex or beyond were significantly more common in molars than in premolars and incisors (P < 0.05). CONCLUSIONS: The vast majority of students rated the modular 3D print training model positively despite it being more demanding. They also recommended its use in preclinical teaching and training. The model allowed a more realistic simulation of the clinical situation with a simultaneous use of EALs and led to reduced stress levels in endodontic treatment in the subsequent clinical courses.
AIM: To evaluate a modular 3D print training dental model with embedded human teeth and electronic working length determination for undergraduate endodontic education. METHODOLOGY: Cone-beam volume tomography data of a human skull were transferred into stereolithographic (STL) data, and a customizable modular 3D print model with individually removable sextants and teeth was generated for the use in commercially available phantom heads. Each of sixty-eight students performed a complete root canal treatment on an extracted human tooth. Working lengths were determined with electronic apex locators (EAL) and verified radiographically. Subsequently, an evaluation was carried out with regard to the difficulty of the working steps access cavity preparation, working length determination, root canal preparation/irrigation and canal filling, and these steps were compared to commonly used benchtop models. Additionally, the agreement of electronic and radiographic working length determination was assessed and analysed statistically with the chi-square test. RESULTS: A total of 68 teeth (20 incisors, 26 premolars and 22 molars) with 127 root canals were treated. In total, 87% of the students considered the modular 3D print model considerably more demanding than the conventional benchtop model. Overall, 96% felt better prepared for the clinical situation, 92% felt markedly reduced stress levels during endodontic practice in the subsequent clinical courses, and 93% of the students suggested the model should be used in future preclinical endodontic training. The preradiographic use of EAL resulted in 85% of the cases having radiographically acceptable working length determination within 0-2 mm from the radiographic apex. Readings more than 2 mm from the apex or beyond were significantly more common in molars than in premolars and incisors (P < 0.05). CONCLUSIONS: The vast majority of students rated the modular 3D print training model positively despite it being more demanding. They also recommended its use in preclinical teaching and training. The model allowed a more realistic simulation of the clinical situation with a simultaneous use of EALs and led to reduced stress levels in endodontic treatment in the subsequent clinical courses.
Authors: Tiago Reis; Cláudia Barbosa; Margarida Franco; Catarina Baptista; Nuno Alves; Pablo Castelo-Baz; José Martin-Cruces; Benjamín Martin-Biedma Journal: Int J Environ Res Public Health Date: 2022-06-29 Impact factor: 4.614
Authors: Katarzyna Mocny-Pachońska; Rafał J Doniec; Sylwia Wójcik; Szymon Sieciński; Natalia J Piaseczna; Konrad M Duraj; Ewaryst J Tkacz Journal: Int J Environ Res Public Health Date: 2021-04-22 Impact factor: 3.390