Correction: Falck, R. et al. Microstructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints by AddJoining Technique. Materials 2019, 12, 864.

The authors wish to make the following correction to the paper [...].

The authors wish to make the following correction to the paper [1]. Due to identical data in Table 6 and Table 7, replace:

with

These changes have no material impact on the discussion and conclusions of the paper. The authors would like to apologize for any inconvenience caused to the readers by these changes.

Table 7

ANOVA results for ULSF for ABS BM FDM.

Factor	Unit	Level 1	Level 2	Level 3	F-Value	p-Value
PT	°C	230	255	280	2.15	1.34 × 10−1
RT	mm	0.1	0.2	0.3	5.73	8.0 × 10−3
DS	mm/s	20	40	60	32.38	1.24 × 10−6
AC	wt.%	5	15	25	29.42	2.43 × 10−5
NC	-	2	12	22	15.64	1.46 × 10−5

Table 7

ANOVA results for ULSF for ABS BM FDM.

Factor	Unit	Level 1	Level 2	Level 3	F-Value	p-Value
PT	°C	230	255	280	1.28	2.97 × 10−1
RT	mm	0.1	0.2	0.3	5.65	1.0 × 10−2
DS	mm/s	20	40	60	14.09	1.78 × 10−6
NC	-	2	12	22	17.19	2.32 × 10−5