Electroactive poly (p-phenylene sulfide)/r-graphene oxide/chitosan as a novel potential candidate for tissue engineering.

Designing novel biomaterials for tissue engineering purpose is an obvious necessary considering ever increasing need for appropriate biocompatibility and properties to achieve the maximum regeneration. In this research, a new type of biomaterial based on poly (phenylene sulfide) (PPS) and reduced graphene oxide (rGO) was synthesized and applied within chitosan based hydrogel to evaluate its performance as a wound dressing potentially. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectrometry (XRD), scanning electron microscopy (SEM) and compression tests were performed to assess suitability of composite biomaterial. Thermal behavior of the PPS/rGO composite was evaluated by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The PPS/rGO composition of 90: 10 (w/w) was selected because of having the highest biocompatibility and utilized in chitosan hydrogel. Chitosan hydrogel swelling ratio was declined from 800 to 200% by PPS/rGO addition; likewise, water vapor transition rate (WVTR) was dropped. A proper biocompatibility and cell attachment was confirmed, where porosity of ca. 80% appeared promising for tissue engineering uses. Overall, the result confirmed the appropriateness of PPS/rGO for tissue engineering uses.